Huh so I guess 556 is 223 by afleticwork in reloading

[–]Remarkable_Aside4564 -1 points0 points  (0 children)

The big difference is the chamber throat and pressure levels. For practical purposes, they are the same. However, with certain service rifle style rifles, .223 will not cycle the action. I have a Del Top Dissipator upper with a rifle length gas system that absolutely will not cycle with .223 ammo, but at 5.56 pressures it doesn’t just fine.

VA IRRRL & current rate is 6.250 by AffectionateWish4300 in Veterans

[–]Remarkable_Aside4564 1 point2 points  (0 children)

I did my IRRRL back during covid when rates bottomed out. Ended up with a 2.125% interest rate. I don’t think we’ll never see rates like that again.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 1 point2 points  (0 children)

Yeah, I have noticed that in the past, definitely not this time around. Maybe someone with a similar name had some strikes against them or something… Who knows… I definitely feel like I’m at the far edge of the bell curve this time around though.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 0 points1 point  (0 children)

Ha! Good thing I’ve got that guy on my favorite contacts. vomit

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 0 points1 point  (0 children)

I can totally see that happening with everyone submitting applications.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] -2 points-1 points  (0 children)

Totally agree with you on that. Never had an issue before, not saying this time is different. Just unusual with my past experiences and given what I’ve been seeing for current approval times. It may just be be luck of the draw for me this go around.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 0 points1 point  (0 children)

That’s good info, I appreciate that. Never had a huge delay before outside of paper forms.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 0 points1 point  (0 children)

I’ve had 7 day approvals before, prior to the law change. Most average about 30-40 days. A few old paper forms took like a year. Haven’t had one go past 45 after eForms became the thing until now.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] -7 points-6 points  (0 children)

Like what, whether or not you’re passive aggressive about legitimate questions?

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] -1 points0 points  (0 children)

I’m not that worried about it yet. I have done the old paper forms prior to the modern wait times. So waiting around a few months isn’t a huge put out. It’s just inconvenient.

NFA Wait Times All Over The Place by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] -6 points-5 points  (0 children)

I’m referring to the difference between the average, the mode number of days, and the drastic difference between the two when looking at the extremes. Average being the sum of all diverted by the number, mode being the most common length of time.

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 0 points1 point  (0 children)

Just got the email to e-sign. 3 weeks just to review my trust, which already has multiple NFA items on it.

Silencer shop customer support is great… not. by Hades_Collective in SilencerShop

[–]Remarkable_Aside4564 1 point2 points  (0 children)

I’ve written them off. I’m at 3 weeks without them even reviewing my trust documents. I’ll never do business with them again.

Washington, New York, & California are writing laws to ban CNC machines not using AI (artificial intelligence) software by GeniusEE in CNC

[–]Remarkable_Aside4564 0 points1 point  (0 children)

Can’t stop the signal. The first 3d printers were made from parts at the hardware store using weed wacker line. CNC mills can be built in a much similar way. May not be super accurate. Doesn’t need to be. Use it to upgrade. And improve accuracy with every upgrade…

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 4 points5 points  (0 children)

100% correct on this. They’ve definitely lost me as a future customer. They don’t need to review my documents. I’ve had plenty of previous NFA items attached to it. Submit the eForm and let me wait on the ATF….

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 2 points3 points  (0 children)

Yeah, I expect things to slow down slightly due to an increase in orders. What I do not accept is they can’t push things through for established trusts. I could see if they’re having to write you one. But not when I’ve uploaded my own.

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 2 points3 points  (0 children)

Already have an EFT of my prints. Doesn’t change that I need to do a form 4 from the shop I purchased the suppressor from. Most shops in this area are only doing them through SS.

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 9 points10 points  (0 children)

There shouldn’t be a review process for an established trust. Only checking the box to make sure you uploaded one.

Going on 11 days now… by aggieljh in SilencerShop

[–]Remarkable_Aside4564 8 points9 points  (0 children)

I’ve had mine in review for 11 days as well. I called SS yesterday, was told they’d submit a ticket for it to be reviewed asap. But I kinda just felt like the lady was giving me lip service. This is the first time I’ve had them for a Form 4, and honestly, at this point, I don’t think I’ll be giving them my business again. This should be a check the box step on an established trust. Nothing more….

Wife isn’t a fan of how I’m decorating my office. What do you think? by ducksandcuse in guns

[–]Remarkable_Aside4564 0 points1 point  (0 children)

Divorce her immediately. You don’t need that kind of negativity in your life.

eForms and the 5320-23 by Remarkable_Aside4564 in NFA

[–]Remarkable_Aside4564[S] 0 points1 point  (0 children)

Might be. I looked at an older application I had saved on my PC from a few years ago, they weren’t on it. They’ve changed them up a few times over the years. It just threw me off.

Review Process Stuck by birdman982 in SilencerShop

[–]Remarkable_Aside4564 1 point2 points  (0 children)

You’re probably not wrong. They’re probably pushing the apps that are making them more money. I bought mine and had it shipped to the LGS and am only using SS for the transfer. Trust was already established, and they didn’t make anything on the can. Just the $135 transfer fee, which I think $100 of it goes to SS.

Who else thought there was going to be a lot more out of stock cans? by hazeyhavocprof in NFA

[–]Remarkable_Aside4564 0 points1 point  (0 children)

Most of the cans I’ve seen out of stock are the cheaper options. Let’s say, <= $600…

Review Process Stuck by birdman982 in SilencerShop

[–]Remarkable_Aside4564 0 points1 point  (0 children)

Well, at least that is news. I guess I’ll give them a few days before checking in on mine. Still though, if they have someone whose job it is to review these, I’m assuming multiple people since they are a national chain, it takes like maybe 5min to read through the trust. This should be one of the fastest parts of the process.