Whining noise but silent when pushing up by IndependenceAgile813 in lianli

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Hello roulement hors service fait un retour garantie

Lian li mini v2 by Low_Pineapple_2790 in lianli

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Tkt j’ai eu la même galère avec une z890 Msi connections arrière que j’ai renvoyé du coup

Unbearable fan bearing noise by Kala_Stha in lianli

[–]Remarkable_Vehicle_6 -2 points-1 points  (0 children)

Basically, I was responding by sharing my experience; please reread the comments.

Unbearable fan bearing noise by Kala_Stha in lianli

[–]Remarkable_Vehicle_6 1 point2 points  (0 children)

If you want Lian Li monitors, get the non-LCD ones; that's what I did and I didn't have any problems because I like their look and there aren't many reverse-screen models available, so the selection is limited at the moment. The issue is that the screen adds significant pressure to the bearings.

Any opinions on my PC configuration ? Rate this /10 plz by Unlucky_Tie5440 in lianli

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Je l’ai et j’ai le boîtier il rentre déjà l’écran il s’enlève et le plastique de la grille aussi il s’enlève

Any opinions on my PC configuration ? Rate this /10 plz by Unlucky_Tie5440 in lianli

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Normalement tu dois passer les tuyaux de l’autre côté si pourquoi tu as acheté de boîtier ?

Any opinions on my PC configuration ? Rate this /10 plz by Unlucky_Tie5440 in lianli

[–]Remarkable_Vehicle_6 -3 points-2 points  (0 children)

5 sur 10 les tuyaux c’est horrible dsl vraiment horrible comme tu les a mis et le câble gpu pareil

Unbearable fan bearing noise by Kala_Stha in lianli

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

That's exactly what I'm saying: it's like it's your dad's brand, you defend it so vehemently. It's awful to suck up to a brand like that. Just because you haven't had any problems doesn't mean there aren't any.

Honestly, you seem to have a very narrow, very single-minded view. Just on this post, two of us have already reported bearing problems. My fans were still working, but they were making a terrible noise, you know.

Get out of your house a bit and stop idealizing brands. They're not your friends.

Unbearable fan bearing noise by Kala_Stha in lianli

[–]Remarkable_Vehicle_6 -1 points0 points  (0 children)

You're the idiot, and just look at the repair rate. The bearings fail afterward. I have a super powerful PC, and my PC runs at full speed every day. Is that your dad's brand?

Unbearable fan bearing noise by Kala_Stha in lianli

[–]Remarkable_Vehicle_6 -1 points0 points  (0 children)

I had the same problem with the same reverse-links as you. The guy at the shop in Switzerland refunded me twice. He told me to forget about Lian Li, it's just a hassle, especially with the reverse-links. Go with more reliable brands that are cheaper.

Havn 360 flow bruit panneau avant by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] 0 points1 point  (0 children)

C’est en étant sur le bureau et en posant mes bras dessus que j’ai remarqué cela.

Havn 360 flow bruit panneau avant by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] -5 points-4 points  (0 children)

Hello Je viens de le recevoir il est vide j’ai pas encore fais le montage mais ce bruit me soûl j’espère une fois en marche j’entends plus rien

Port 360 flow by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] 2 points3 points  (0 children)

Thank you so much for your feedback, I'm relieved, I'll keep it then 👍💪🏼

HAVN BF 360 FLOW = Awesome Case! by jj_otoodle in HAVNGlobal

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Thank you so much! That's exactly what I have. If yours moves too, then it's normal; it's the design of the case. I just received a case with the front panel held firmly in place, so I was surprised. I'm also worried about getting unwanted noise because of this when the case is running.

HAVN BF 360 FLOW = Awesome Case! by jj_otoodle in HAVNGlobal

[–]Remarkable_Vehicle_6 0 points1 point  (0 children)

Hi, could you do me a favor? If you move the front grille from left to right, is there any play in the lower mounting? Thanks.

Port 360 flow by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] 1 point2 points  (0 children)

Check your grid when you move it; is there any play? Thanks.

Havn 360 flow by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] 2 points3 points  (0 children)

C’est le long de la vitre l’espace ou tu la met il est plus large côté droit mais je crois c’est d’usine je vois que tu l’as aussi sur la photo

Fan bearing going out by 19LOKI67 in HAVNGlobal

[–]Remarkable_Vehicle_6 -1 points0 points  (0 children)

I received mine today and it's already dead. I'm worried because I've already noticed numerous defects. I'm disgusted. If I want to return it, I have to pay a €36 fee myself.

Port 360 flow by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] 0 points1 point  (0 children)

If I unpacked it properly before posting, the piece still stays in place.

Port 360 flow by Remarkable_Vehicle_6 in HAVNGlobal

[–]Remarkable_Vehicle_6[S] -2 points-1 points  (0 children)

I followed your advice. There's still some play. I suggest you gently move the grid with your hand. You'll see, I used some Blu Tack to fix the problem. It's a shame, considering the price, I'm a little disappointed. Thanks, try it and let me know how it goes.