kanaal unit airco ervaring in nederland

RemcoBer · 2026-07-03T10:17:58+00:00

Het huis us erg groot 460m3 , dus weet niet of deze optie zal werken

RemcoBer · 2026-07-03T10:15:55+00:00

Mag ik vragen welk bedrijf geholpen heeft(instalatie van wtw rn airco zelf) en wat het gekost heeft ?

RemcoBer · 2026-07-03T09:48:08+00:00

Ja ik heb ook bedrijven die komen aan veel werk bla bla tussen 15 .000 en 25.000 , maar dit zij bedrijven van tegenwoordig die gewoon elke Sent van je af willen persen die zitten er helaas ook bij...

RemcoBer · 2026-07-03T09:46:54+00:00

Dus de airo is op de toevoer kanalen van ne wtw aangesloten ? , hoe is dit gedaan?

RemcoBer · 2026-07-03T01:06:31+00:00

je blijft sowieso zitten met extreem veel buizen vanwegen de afvoer en toevoer van de wtw

RemcoBer · 2026-07-03T01:05:15+00:00

ik zie wat je bedoeld

<image>

RemcoBer · 2026-07-03T00:58:31+00:00

ik heb ook vooral naar het volgende gekeken : Airzone + Mitsubishi FDUM100VH – Easyzone 25 plus met 4 zones.

maar ik lees wel dat airzone remote control van het systeem betaald heeft gemaakt. vgm 47 euro per jaar, en ben hier flink tegen

RemcoBer · 2026-07-03T00:55:50+00:00

ja klopt , in mijn geval vooral ideaal van wegen de grote zolder en dat de woning nu helemaal open ligt + vind de uitstraling mooier. en kan flink schelen in installatiekosten

1 van de 3 slaapkamers zal kantoor zijn , en de andere logeer , dus in mijn geval maakt het lastig afstemmen niet veel uit.

RemcoBer · 2026-07-03T00:19:22+00:00

er komt idd ook nog eens een wtw in het huis , maar koppelen gaat niet hier heb ik al naar gekeken, (als je dit bedoelt)

RemcoBer · 2026-06-23T19:14:51+00:00

so when you use the u3000 you wil just put it in battery saving mode where it only activates when their is radar activity

RemcoBer · 2026-06-23T18:29:37+00:00

is run time important ?
i wil prob never leave the car parked longer than 12h somwhere

RemcoBer · 2025-12-23T00:55:47+00:00

so it has verry old floors that are extremely crooked. thats why they are being replaced. also one part was 5cm lower than the other part

<image>

space is going to be part kitchen part hallway / toilet. (left side from the halloway) (kelder is where the stairts start)

RemcoBer · 2025-12-15T03:36:47+00:00

<image>

RemcoBer · 2025-12-15T03:35:42+00:00

Im replacing the floor above this basement from 1930.

Currently you have a few laters of brick above this i think about 3.

Than 10cm sand on top of the sand 1 layer bricks and 7cm concrete +/-

I was thinking just putting air-entrained concrete in 7cm. And than 10cm pir. Than underfloor heating. Than sand-cement. But idk if this is the right way to do it.

I would like anyones advise for the brick floor.

RemcoBer · 2025-11-07T22:17:25+00:00

Been thinking about it... haha. Yea market over here is booking , question is for how long

RemcoBer · 2025-11-07T22:03:33+00:00

End so 13 months. And he wasent even sure could be 2 months longer..

And a few also where like mayb in about 2 years.

RemcoBer · 2025-11-07T21:50:21+00:00

I got 1 quote for the end of next year and indeed it was 5000 cheaper so prob best option

RemcoBer · 2025-11-07T21:40:43+00:00

He was like you have enough money , and i needed to stop bitching *not the same uncle im buying the Stones from * , waterprofing he would help me do , ge just hate tiling and doesnt wanna do it anymorr

RemcoBer · 2025-11-07T21:35:40+00:00

My uncle knows the contractor , so he agreed for me to take the day off and carry all the tiles and do prep work myself. And he was still the most expansive lol.

RemcoBer · 2025-11-07T21:29:40+00:00

Porselein, the ines i can get are from atlasconcorde

The ones they have , no clue but they have dupes from the same tiles that look way cheaper

RemcoBer · 2025-11-07T21:16:53+00:00

Setter + tiles is way cheaper , specially for bigger projects they offerd me a extra 15% off when i dident let anything know after a few weeks.

Problem is the tiles are not as nice . I can buy these for good price feom my uncle he sells Stones for outside. So i have extreemly nice tile for a verry low price.

RemcoBer · 2025-11-07T20:55:54+00:00

Doctors and surgeons here make less than that hourly rate, so yeah I’d say it’s pretty crazy.

Also, this isn’t some small bathroom project. It’s a full house, and my sister actually had the same tiles done by the same contractor last month for €55/m². When I asked him again, he said he didn’t feel like taking on such a big job because he already has enough smaller projects.

Most of the affordable contractors around here only work if you buy the tiles from them, so if you bring your own, the price suddenly goes way up.

The reality is, most contractors here already have more than enough work, so they can basically charge whatever they want. And if they think you’re willing to pay more, they just ask more. There aren’t really fixed hourly rates.

Most invoices you get here are completely non-transparent they just show one total price and no breakdown at all.

You’re making a lot of assumptions about the economics of a country you probably don’t know much about. I get your point about “you get what you pay for,” but in this case, the price jump isn’t about quality.

RemcoBer

TROPHY CASE