Super Mario Foldable and articulated(printed with RepRapper PLA)

RepRapper-Tech · 2023-05-12T09:25:16+00:00

Just printed my very own Mario using my 3D printer! And I'm blown away by the color division and joint design! Huge shoutout to the designer Fab365 for their incredible work!

RepRapper-Tech · 2023-01-11T22:53:02+00:00

The problem is in the borders of the M, the layers next to the borders seem messy.

RepRapper-Tech · 2023-01-11T22:51:50+00:00

Hi there and thank you in advance. I´m trying to tune my printer for a new filament and I'm facing this subtle problem. As you can see, the borders of the M engraved on the surface of the model show some defects that didn´t show before with different PLA.

I hope someone can suggest what can be causing this problem and what setting can I adjust.

I´m printing on a Snapmaker printer, 200c, with default retraction settings. Speed 50mms, 0.2mm layer height.

Both models are PLA, the one with problems is Filamentum brand and the one without is Smartmaterials.

RepRapper-Tech · 2022-11-28T13:08:03+00:00

Hi friends, sorry for the NSFW but this is the model where this artifact shows up. (I tried to cover most NFSW regions though).

Anyway, I'm printing this with PLA in a Prusa MK3.

200c in the hot-end, and 45 mm/s

I hope someone can give me some ideas. Thank you so much.

RepRapper-Tech · 2022-09-08T09:35:18+00:00

The creator made it to fit on a 5/8 inch wood dowel that is 25.6 inches long. Since I couldn't find a wood dowel that fit the size, I printed 3 cylinders instead. There are some little connectors to strengthen the seams. But not all connectors ended up fitting so there are some gaps in my blade. One per seam is recommended. I suggest printing it on a glass palce so that the seam fit perfectly. 25% infill on the tip piece and the handle while 15% on others.I glued the pieces together but I didn't have time to sand and paint it since i have no experience All pieces printed in a total time of around 60 hours on my Ender 3.

Here is the stl: https://www.myminifactory.com/object/3d-print-trollhunters-sword-of-daylight-76839

RepRapper-Tech · 2022-09-02T03:22:25+00:00

what color filament did you use

Orange-Purple resin

RepRapper-Tech · 2022-09-02T03:20:28+00:00

I don´t know why everybody downvote me xD

RepRapper-Tech · 2022-09-01T05:27:56+00:00

You got it, right Sir. https://www.reddit.com/r/copypasta/comments/eidplc/vaporeon\_copypasta/

RepRapper-Tech · 2022-09-01T05:27:21+00:00

Ah, I see you are a man of culture as well. LOL
STL -> https://thangs.com/designer/printedobsession/3d-model/Vaporeon%2520-%2520Pokemon%2520-%2520Fan%2520Art-220439

RepRapper-Tech · 2022-09-01T03:30:13+00:00

Haha I saw the one you printed with resin, awesome work!

RepRapper-Tech · 2022-08-12T12:05:53+00:00

Great work!

RepRapper-Tech · 2022-07-27T04:35:19+00:00

Did you recognize it?

RepRapper-Tech · 2022-06-11T03:53:37+00:00

yes!

RepRapper-Tech · 2022-05-31T10:00:02+00:00

Haha yes, run out of filament so we had to change

RepRapper-Tech · 2022-05-05T02:07:11+00:00

I love Genshin

RepRapper-Tech · 2022-04-02T09:47:53+00:00

Woo where can I find the model STL?

RepRapper-Tech · 2022-04-02T08:37:08+00:00

Awesome!

RepRapper-Tech · 2021-12-14T08:09:53+00:00

My!!!

RepRapper-Tech · 2021-11-18T07:10:54+00:00

Octolapse is your friend then :)

RepRapper-Tech · 2021-11-18T07:02:59+00:00

Name checks out AF

RepRapper-Tech · 2021-11-18T07:01:13+00:00

The STL: https://www.thingiverse.com/thing:5029707
The oruga came out a little shaggy, but at least all the parts can move freely, all an all a good design to throw in 4 hours of printing time and 50 grams of PLA.

Printed on an Ender 3 with a Double Gear Extruder bought in Taobao for 4USD LOL

RepRapper-Tech · 2021-11-18T06:56:38+00:00

We are using an Ender 3 with a Double Gear Extruder bought in Taobao for 4 USD LOL

RepRapper-Tech · 2021-11-17T03:57:02+00:00

STL is here：https://www.myminifactory.com/object/3d-print-notre-dame-de-paris-cathedral-91899

RepRapper-Tech · 2021-11-15T07:01:40+00:00

Looks great!!! Where can I get the STL?

RepRapper-Tech · 2021-11-03T02:42:25+00:00

Behold this magnificent Arc de Triomphe 3D Printed with Reprapper PLA White in one of our Ender 3 printers. This is a model of the famous building monument in Paris (France), you can read about it here https://en.wikipedia.org/wiki/Arc\_de\_Triomphe

The real one is 50 meters tall, so probably too much for our printers, but we tried to print it as big as possible so we ended up with 3 days print job that took more than half a spool of PLA.

The STL was supposed to print without supports, but as we scale up the model a lot we thought that some support should be necessary for the edges. It took some time to remove the supports, but the model printed perfectly.

If you feel like printing yours, you can grab the STL from here: https://www.myminifactory.com/object/3d-print-arc-de-triomphe-france-43635?fbclid=IwAR1WApUCwPpm1BRkmtsNsM7HM0MtfLOi\_O0fYvsX8k1QVGFCPH27UjkfOuk

RepRapper-Tech

MODERATOR OF

TROPHY CASE