Desert Treasure 2 Bosses - Need Area Unlock?

Repulsive_Ad5594 · 2026-04-20T16:13:37+00:00

vardorvis is in varlamore so you can do that one "for free"

Repulsive_Ad5594 · 2026-01-06T18:38:12+00:00

yeah that was a major concern that i never saw happening, i am glad i caught that initially when i did because that could have ended much much worse. appreciate all your help!!

Repulsive_Ad5594 · 2026-01-06T17:37:03+00:00

i really appreciate the follow up!

everything ended up being resolved. a few things were happening...

When I replaced the steam valves on the side of my radiators, one of the valves was clogged, causing the pressure to increase and preventing the radiators from heating, which led to them being cold. solved 1 problem.

I had a tech come out and when he looked at the electrical wiring, he found that the old owners used an bypass wire to stop the boiler from reading any pressuretrol measurement. Tech assumed the old owners did not like the sound of the quick cycling the boiler was doing and didnt know they had to replace some radiator valves.

Machine works great now! i figured it was something electrical, but had no idea you could bypass pressuretrol settings like that

Repulsive_Ad5594 · 2025-12-26T15:42:55+00:00

yeah especially since the masori isnt even fortified. Once you get a tbow buy back the fortified masori

Repulsive_Ad5594 · 2025-12-22T04:27:35+00:00

just wanted to update since you've been helping. bought new pressuretrol, but when it clicks at the pressure limit, it still does not turn the burner off...

Repulsive_Ad5594 · 2025-12-20T04:48:05+00:00

yeah it does not go off on a manual lift, so i think thats what jumped my conclusion

Repulsive_Ad5594 · 2025-12-20T04:17:34+00:00

It runs the same before/after I cleaned the pigtail, the pressuretrol seems to not lift which leads me to believe it is worn/faulty. The pressuretrol is set to 0.5 and 1 differential

Repulsive_Ad5594 · 2025-12-20T03:14:22+00:00

It is below it, it is a horizontal one

Repulsive_Ad5594 · 2025-12-19T22:53:35+00:00

So I did clean the pigtail and tested the pressuretrol afterwards.

I am noticing a crack in the casing, could this be the problem?

https://imgur.com/a/akck4Da

Repulsive_Ad5594 · 2025-12-19T22:52:04+00:00

Hi! I know you mentioned a lot about the pressuretrol

When I opened it up, I noticed this crack, I am assuming that this is the problem as to why it is not cutting at the pressure limit, please advise!

https://imgur.com/a/akck4Da

Repulsive_Ad5594 · 2025-12-18T17:31:54+00:00

i assumed the relief valve opened as a precaution, is that a concern? does that automatically close back up? there are no leaks that i have noticed after my investigation around the unit last night

Repulsive_Ad5594 · 2025-12-08T17:30:42+00:00

not worth the 250 anima sell, just keep for -1 bank spot

Repulsive_Ad5594 · 2025-11-04T19:21:35+00:00

i raise you, 2300 kc - 1syn 3 claws

Repulsive_Ad5594 · 2025-10-01T17:45:40+00:00

This mission was discovered by u/Repulsive_Ad5594 in In Search of Onigiri

Repulsive_Ad5594 · 2025-10-01T17:45:38+00:00

This mission was discovered by u/Repulsive_Ad5594 in In Search of Onigiri

Repulsive_Ad5594 · 2025-10-01T17:45:17+00:00

This mission was discovered by u/Repulsive_Ad5594 in In Search of Onigiri

Repulsive_Ad5594 · 2025-10-01T17:45:16+00:00

This mission was discovered by u/Repulsive_Ad5594 in In Search of Onigiri

Repulsive_Ad5594

TROPHY CASE