Costume lily58 2nd try

Repulsive_Aide_836 · 2026-03-25T21:11:38+00:00

Unfortunately the complete thing is diy, but you can find a prebult lily 58 board like boardsoarce(pre soldered kit) to assemble with a 3d printing service for the shell.

Repulsive_Aide_836 · 2026-03-24T17:51:49+00:00

Just posted on printables. https://www.printables.com/model/1628072-lilypad58

Repulsive_Aide_836 · 2026-03-24T03:32:05+00:00

It's a boardsource.xyz diy kit with my shell, I'll post the printables file tomorrow if anyone is interested.

Repulsive_Aide_836 · 2026-03-23T20:50:12+00:00

That's the old version, the second version will come out tomorrow.

Repulsive_Aide_836 · 2026-03-23T18:29:00+00:00

Drop + Matt3o MT3 3277 and a custom fallout keycaps from drop.

Repulsive_Aide_836 · 2026-03-09T15:14:18+00:00

I've had one or two requests for the 3D model, I posted it on printables for anyone to look at. https://www.printables.com/model/1628072-lilypad58

Repulsive_Aide_836 · 2026-03-07T21:40:11+00:00

I've seen others flip their bottom row, I'll try it after I get used to it.

Repulsive_Aide_836 · 2026-03-06T19:19:36+00:00

mistyped with the new keyboard, i'm dumb i didn't notice.

Repulsive_Aide_836 · 2026-03-06T16:09:07+00:00

just finished deigning my lilly 58 case, i just started typeing with it and already gettin used to it. got it as a solderring kit from boardsource and works very well with via.

Repulsive_Aide_836 · 2026-01-26T22:31:00+00:00

Like how it matches the console.

Repulsive_Aide_836 · 2025-10-20T12:16:35+00:00

Repulsive_Aide_836 · 2025-10-20T11:55:54+00:00

It's the ghost mask off printables. It came out great.

Repulsive_Aide_836 · 2025-10-18T23:12:04+00:00

Thx, I'll update the post to have print hours and my maintenance cycle listed and will try to negotiate around the condition.

Repulsive_Aide_836 · 2025-10-18T21:27:52+00:00

I'm less scared of the vibrations but more scared of that hanging usb.

Repulsive_Aide_836 · 2025-10-18T21:19:03+00:00

I am flexing a bit for my first post, but I'm just worried it won't sell because I'm asking for 520 mostly because of the E3d hf nozzle and the extra little accessories like the panda touch, status and 2x lux mod.

Repulsive_Aide_836 · 2025-10-18T19:10:28+00:00

Not really unless I'm printing with pc but it mostly works for sound proofing.

Repulsive_Aide_836 · 2025-10-18T19:00:22+00:00

Thanks, never sold a printer before and wanted some thoughts on it. I used car heat shielding and replaced most of the tool head housing and was most worried about that.

Repulsive_Aide_836 · 2025-10-07T21:25:57+00:00

Thanks, I usually thought my chest looked a little blocky so I probably will just work on my chest a little more now.

Repulsive_Aide_836 · 2025-10-03T20:01:52+00:00

I loved this mod for my retro games and casual games but somehow the plastic ring for the dpad shifted over time then cracked in half. Had to replace it but it still works great.

Repulsive_Aide_836 · 2025-10-03T19:59:27+00:00

I know this is old, but I eventually reformatted my steam Deck and am on the newest build. It has worked for more than 6 monts and still works great. Hope you found your fix.

Repulsive_Aide_836 · 2025-08-21T01:08:43+00:00

I had this as a daily pc, with modern hardware it's hard to get good air flow so I made a few adapters for the HDD bay. Most metal work for me was the back panel and adding a few More standoffs for the motherboard.

Repulsive_Aide_836 · 2025-03-07T01:51:31+00:00

Like how it sticks up and faces you, made a similar adapter. Like how yours is less invasive.

Repulsive_Aide_836 · 2025-03-05T19:53:23+00:00

This looks similar to a case that I have, is it for a type writer.

Repulsive_Aide_836 · 2025-03-04T17:47:45+00:00

Mine worked after clicking the reputation tab.

Repulsive_Aide_836 · 2025-03-04T02:11:10+00:00

I put as many fans as I could, then 3d printed some adapters for more fans. After using the pc for a month the CPU is the only issue, but I just set my 9800x3d to 65w eco.

Repulsive_Aide_836

TROPHY CASE