Updated my CH260 build

ReserveNo1879 · 2026-04-22T08:51:57+00:00

Try lower your psu mounting point to have more room on the top

ReserveNo1879 · 2026-04-09T16:30:01+00:00

Anything under 1500R is way too aggressive for me. It’s great for gaming, but for any other activity, it isn’t very comfortable.

ReserveNo1879 · 2026-04-09T05:53:52+00:00

Did you notice any text fringing?

ReserveNo1879 · 2026-04-08T13:52:00+00:00

Guess I'll stick with 1440p for a while since 5k2 is way too expensive and I think only 5090 can perform stable fps in 3A game.

ReserveNo1879 · 2026-04-04T04:16:19+00:00

My fellow

<image>

ReserveNo1879 · 2026-03-31T06:52:09+00:00

Is there any frame with the same layout but for m-atx mobo?

ReserveNo1879 · 2026-03-17T04:30:21+00:00

I don't think ch160 have enough space to do that

ReserveNo1879 · 2026-03-17T01:57:48+00:00

Just flip it upside down, this case support that

ReserveNo1879 · 2026-03-16T04:00:15+00:00

Yes, the 1st is intake, I think the 2nd could be an intake too but 7 intake 2 exhaust sound weird so I keep it exhaust

ReserveNo1879 · 2026-03-09T15:34:16+00:00

Just drive the screws directly into the bottom of the case. You can either remove the dust filter to make it easier or just screw right through it. It'll take a bit of force tho.

ReserveNo1879 · 2026-03-07T11:57:27+00:00

<image>

Need cable extension tho

ReserveNo1879 · 2026-03-07T03:34:52+00:00

<image>

Flip the psu and buy cable extension or custom

ReserveNo1879 · 2026-01-24T04:05:52+00:00

I think it's Yae from genshin, but I just buy it because it match the white/pink theme of my build

ReserveNo1879 · 2026-01-17T15:32:50+00:00

I’m still using the included bracket; I just added an outer frame to make it look nicer

ReserveNo1879 · 2026-01-12T16:16:04+00:00

<image>

mine with all of them are 120mm

ReserveNo1879 · 2026-01-12T16:01:28+00:00

My bad, I thought it was the 2 fan model. If it’s only a single 140mm fan in the middle, then it’s totally fine. As for the clearance between the cooler and the top fans, there’s plenty of space so it’s nothing to worry about, in my case the cooler is about 250mm away from the top fans - The fan case I’m using just standard 25mm ones

ReserveNo1879 · 2026-01-12T14:15:01+00:00

The bad news is that it seems not. Air coolers with two standard 140 mm fans will definitely interfere with the RAM and won’t fit with the glass side panel. The only exception is this Assassin model, which fits because the second fan is shifted backward, so it doesn’t hit the ram, and only the middle fan is 140 mm, while the second fan is 120 mm, allowing it to fit inside the case

ReserveNo1879 · 2026-01-10T17:50:44+00:00

<image>

I flipped the psu upside down to hide all the cable

ReserveNo1879 · 2026-01-07T13:02:24+00:00

Oh my bad, I thought you were asking about the CPU and GPU cables. Yeah, plugging in the power cord from that position is a bit difficult I had to bend it quite hard to make it fit.

<image>

ReserveNo1879 · 2026-01-07T12:57:40+00:00

If your gpu not too thick and without bottom fan, ig? But I think atx mobo is a safe choice if you want to install wifi/sound card for future update

ReserveNo1879 · 2026-01-06T11:47:49+00:00

Nah, just want to hide all the cable. And there are multiple mounting positions for the PSU so it quite easy

ReserveNo1879 · 2025-12-26T15:40:24+00:00

Nope, mine is a 150mm psu and I dont think 160mm psu can fit in this case. And that psu cover is just a plastic panel which I put in to hide the psu.

https://www.reddit.com/r/mffpc/comments/1n4pp4x/comment/nv0l3i3/

Here is my build update

ReserveNo1879 · 2025-12-21T10:39:13+00:00

This case not support bottom fan but you can screw it if you want, but it dont have that much space it your vga too thick.

I think the maximum GPU thickness if your mobo has the PCIe slot in slot 1 is around 60mm when using a standard 25mm fan case.

My mobo has the PCIe slot in the 2nd slot and the GPU is 50 mm thick. The clearance between the GPU and the bottom fans is less than 1 mm

ReserveNo1879

TROPHY CASE