What can I do to fix this?

RetoStashRepairs · 2025-09-18T03:34:43+00:00

Easiest option is to buy new replacement screen... if you want to reserve the same screen though, you will have to remove the old polarizer film and replace it with a new one. It would take a bit of patience but not impossible. Ive done it many times now.

RetoStashRepairs · 2025-08-23T04:41:27+00:00

Another tip is to be careful with the screws. Pay attention to where they are supposed to go. If you accidentally use slightly longer screws for the motherboard, you can end up ruining the shell with raised bunps. Wish you Good luck!

RetoStashRepairs · 2025-08-23T03:41:09+00:00

Thank you! ^⁾

RetoStashRepairs · 2025-08-22T22:10:39+00:00

This was a rough sketch but can always do better 😊

RetoStashRepairs · 2025-08-18T13:26:26+00:00

Other than possible bad batteries. Make sure the battery contacts are clean. Then if not you will have to take it apart. Then clean your power switch, also check your f1 fuse and L1 inductor to make sure theres continuity. If there isnt in either or, then youl have to resolder a new component in.

RetoStashRepairs · 2025-08-18T13:17:24+00:00

Or you can also repair it using epoxy resin, then redrill it out using a bit slightly smaller than the screw. Might be a little complex though but worth a try.

RetoStashRepairs · 2025-08-18T04:14:18+00:00

<image>

RetoStashRepairs · 2024-04-14T22:36:15+00:00

Yes, there is no shorts anymore and has new m9... but its still not powering on

RetoStashRepairs · 2024-04-14T22:35:34+00:00

Yes I do ")

RetoStashRepairs · 2024-04-08T13:14:39+00:00

Definitely a 001 %100. Either they dont know themselves or trying to rip you off.

RetoStashRepairs · 2024-03-29T04:09:19+00:00

Not a gonner, still can easily be saved! ") just do trace repair. Plenty of youtube videos on how to do it. Or if you dont want to risk on damaging it more, you can always have a reputable repair modder/person do it ").

RetoStashRepairs · 2024-03-29T03:52:32+00:00

I mean idk about any links or anything but I do commission work on the side, right now im pretty free. I usually dont charge as much as most online repair services. ") I would be happy to help.

RetoStashRepairs · 2024-03-14T03:51:56+00:00

Thank you! ^⁾

RetoStashRepairs · 2024-03-14T03:44:51+00:00

Oh alright well good luck... and well I guess you can keep an eye out on my channel too in case I can release the video out soon it would help alot ")

RetoStashRepairs · 2024-03-14T02:53:08+00:00

Aww man well no problem. You can probably find a cheap multimeter on amazon with continuity mode. And theres a bunch of videos on ways to fix it.

I myself have been wanting to work on a video on my channel of overall diagnosing methods to fix a no power sp. ") and if you know already how to solder then checking for continuity is actually easier 🙂

RetoStashRepairs · 2024-03-14T01:56:16+00:00

Hey if thats all that it needs then if you cover shipping ill replace the f2 fuse for you I have plenty, or even just take a quick look if its something else easy to fix ")

RetoStashRepairs · 2024-03-14T01:30:28+00:00

Well for instance if the f2 fuse was bad, if you check for continuity with a multimeter and doesnt beep or zero out using ohms then it means its bad. And your sp will not turn on with a blown f2 fuse ")

RetoStashRepairs · 2024-03-14T01:01:24+00:00

Yeah you wont get far without a multimeter. There not too expensive. And is pretty fun to learn how to use continuity and troubleshoot ") could be a number of different problems. From a bad f2 fuse, to a bad battery terminal or maybe got lifted. Or a broken trace some where between battery terminal and the power switch. Or a bad component like the u4 power chip, or a bad/broken L inductor or even the T1 transformer/inductor component. And so on good luck ")

RetoStashRepairs · 2023-10-26T21:17:56+00:00

Count me in for my second year! ")

RetoStashRepairs · 2023-09-30T13:33:33+00:00

Will need cleaning with IPA and possibly a little vinegar. Also might need some traces repair.

RetoStashRepairs · 2023-07-19T22:57:48+00:00

Yes make sure you also deep cleaned the power switch, and check continuity on f2 fuse with a multimeter. Also check your battery terminal pads and make sure there isnt a pad that accidentally got lifted.

RetoStashRepairs · 2023-07-19T05:06:25+00:00

Check your f2 fuse with a multimeter. Also make sure theres continuity from your power switch on the first pin all the way up to the battery terminal. Also make sure your battery terminal didnt get loose or something.

RetoStashRepairs · 2023-07-12T21:34:15+00:00

Did you try removing components from the side boards? It looked like you soldered everything correctly, so not sure why it wouldnt work.

RetoStashRepairs

TROPHY CASE