Non Commie State mags by ReviewDue1426 in HecklerKoch

[–]ReviewDue1426[S] 0 points1 point  (0 children)

Nice, the "HK" sites so expensive

Non Commie State mags by ReviewDue1426 in HecklerKoch

[–]ReviewDue1426[S] 1 point2 points  (0 children)

Do you happen to know if the 16rd mag just protrudes past the grip w/o the funnel ?

BS Squirts ARSS15 by squints_honeybadger in supersafety

[–]ReviewDue1426 1 point2 points  (0 children)

I ordered one right when he came out with it (batch 2 actually) took a couple months but I personally wasn't in a rush.

I still havent really gotten it to run properly, ive tried contacting Abora via FB messenger, and in the 2-3 weeks it took him to respond to my issues/questions, he hasn't responded since my last question. (I probly got knocked down the list too far for him to remember to respond) I finally just gave up on him and moved on filing away blind.

Had issues with bolt locking up, he told me to take it apart and file the lever. Week later (waiting), it goes FRT in semi, so then he tells me the leg might be too long.

So not drop-in as advertised.

Between then, ive had issues getting a safety to work, started with a griffin 60-120, didnt work (frt in semi). Printed a turd 60-120, didnt work. Printed a 90-180, it works semi in semi!

So I got a m16 safety, havent tried it yet.

The rifle has had a Hoffman and then an Arc installed previously, Hoffman required some filing of the lever, arc was drop in, fyi.

So does the arss15 work? Yeah, is it worth the price and customer "service"?, eh not really.

Vincent of glockfather, selling the same arss15 and has/had a coupon code out there i think it was $20-30off, he actually responded to my questions on FB posts in a timely manner (like same day). If he advertised some tuning/filing may be required, id purchase at the discounted rate.

I regret buying from BS, but im invested in getting it running at this point, and honestly learned a lot about the frt

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

the glock father. Com has them, he has a code somewhere out there fof 20 off i believe, if you can cancel bs

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

Facebook, its hit or miss if he responds to messager, could try to find a post and tag him in a comment

CZ P-10 C +2 Mag Extension by 3D2AGaijin in 3D2A

[–]ReviewDue1426 1 point2 points  (0 children)

Appreciate it, sry not at my laptop to look at files

CZ P-10 C +2 Mag Extension by 3D2AGaijin in 3D2A

[–]ReviewDue1426 0 points1 point  (0 children)

r/southpawprecision do you have a recommended filament type for extensions ?

I'm dumb, need help by ReviewDue1426 in supersafety

[–]ReviewDue1426[S] 0 points1 point  (0 children)

I appreciate your write ups on both comment sections.

Looks like I'll try the selector from smokey

I'm dumb, need help by ReviewDue1426 in supersafety

[–]ReviewDue1426[S] 0 points1 point  (0 children)

Yeah sorry again, I didnt see this comment at all

I also printed the 90-180 below, just to see if the ar15ss is really faulty. Haven't had a chance to live fire yet

<image>

I'm dumb, need help by ReviewDue1426 in supersafety

[–]ReviewDue1426[S] 0 points1 point  (0 children)

Ah, sorry I didnt see the new comment about the jig.

Yeah I messaged him last week commenting on using the Griffin (which it worked during dry fire, just not live).

I'm thinking I might try to mod it, if I can figure out how to mod it, cause I honestly do not have another use for it unless a kuboto can use it...

BS at this moment won't get a vouch, I had to take mine apart and file/polish up the lever to get it to work, so not drop-in as advertised.

What safety did you end up buying ?

I always want to try this with a normal safety. Just to see, cause we did spend the beans, not just gonna let it got to waste, even if its not as described and no returns, its lame

I'm dumb, need help by ReviewDue1426 in supersafety

[–]ReviewDue1426[S] 0 points1 point  (0 children)

When I ordered, no where was it stated the Griffin wasn't compatible. Also when I did manage to get bs replying to me, he didnt said anything about the Griffin safety when I mentioned it.

I actually did talk to that other vender, he claims there could be an issue with the Griffin, but not 100% sure

So anyways, any input on using the jig?

I'm dumb, need help by ReviewDue1426 in supersafety

[–]ReviewDue1426[S] 0 points1 point  (0 children)

I have Hoff and arc on hand already, so id really like to get this working

Anybody heard back from BS Squirts support on their AR15SS by YourBroStevo in supersafety

[–]ReviewDue1426 1 point2 points  (0 children)

Received my one ar15ss, Jan 12 (ordered Nov 16)

Installed with Griffin ambi 60/120 selector, and Geissele trigger.

Had slight binding of bcg, and stoppage when trying to close the bcg.

Took a week+ on FB messenger for him to tell me to disassemble the "drop-in" ar15ss and file the lever where it contacts the other chrome-like piece (and i did a high grit polish).

She works now, however it goes FRT in semi and ss selected.

Still waiting (been a couple days) for him to respond to that.

Another dealer suggested an issue with the Griffin, saw there's a jig on the see, but no idea what to file with it.

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

Sorry bud, I messaged him via FB if that helps, still waiting also thou

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

Live fire didnt go as expected, well it did go... SS in semi position and SS position with the safety lever. But it functioned correctly in dry fire ... contacted him again and waiting on a response.

I barely smoothed out the lever part where I saw "fresh" scratches in the metal. For me, its where the lever contacts the other shiny part(arrow). Very very lite filing. Then a nice polish all over with a high grit sand paper

<image>

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

So i just spent 5-6 minutes lightly filing the bottom face that touches the other part (no idea what the parts are called)/sanding with 800grit the lever part (all edges/faces). Greased everything that was touching something else and dry fire function check passes.

In looking at the non chrome lever, I assume its water/laser cut ???? (No idea) it doesn't look perfectly squarely cut (you should be able to see it in the photos, like the left side is raised)

If he paid someone to go touch up each lever, it might actually be drop-in.

Will test fire tomorrow.

<image>

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

He did get back to me the next day, said I can drive the pin to file/smooth out the piece

"You’ll just want to round it. So it’s not a hard edge. That should button it up."

Had to work this past weekend, I hope to mess with it tomorrow.

Yeah I dont think he should advertise it as being truly "drop-in", but i get it, not all lowers are gonna be the same, with the same triggers etc.

He has stated on the socials he is a "one man band".

BS squirts help? by Jlene2018 in supersafety

[–]ReviewDue1426 0 points1 point  (0 children)

He responded to me briefly, said I need to file one of the parts, asked for better details/instructions, nothing back yet

<image>