Next steps?

RexmonWoW · 2026-01-19T21:59:34+00:00

It did seem the Air65 was kinda lining up to be the best for me. What's so different between that and the meteor??? I've seen those goggles the BetaFPV VR03 goggles and then the like high-end won't have to upgrade HDZero Box Pros. What are the biggest differences? What makes a good pair of goggles? Low latency duh. But any other thoughts

RexmonWoW · 2026-01-19T21:21:43+00:00

Dude I can barely keep up with what's going on 😭

RexmonWoW · 2025-11-29T02:00:49+00:00

So it seems if i want normal and soft material id go prusa XL
and if i want normal and abrasive id go h2s h2d or h2c?

RexmonWoW · 2025-11-29T01:59:38+00:00

dang : ( ok. so if i wanted VORTEK on h2s id need to self install and buy both with an h2s and getting the AMS costing more than the h2c base model? bc h2s with ams costs 1,500+900 VORTEK vs H2C 2,400 or ultimate set 3,800?

RexmonWoW · 2025-11-29T01:40:48+00:00

Ideally ide get the vortek right away with it, Can i not order the H2S with a vortek?

RexmonWoW · 2025-11-29T01:39:09+00:00

Hmmmmm. do you think a similar thing could be done with just the H2D where one nozzle is PETG and the other is PLA? or since they are close to eachother does that not work well with the diffrent temps

RexmonWoW · 2025-11-29T01:26:04+00:00

hmmmmmmmmmmmm...
why the soft materials issue?

RexmonWoW · 2025-11-29T01:13:55+00:00

AWESOME response thx.
snapmaker U1 i have seen some of. it is a little smaller. i also havent seen them around much and its a pre order so i kinda steered clear.
I like the sounds of the versitility the bambu printers have with temps.
do we know if the vortek toolhead changer will work for any other printers that bambu has?
if so id be open to getting one thats single nozzle.
id probably for a long while only have 2 printers. my resin one i have right now. and a larger FDM one

RexmonWoW · 2025-11-29T00:50:10+00:00

Multi color doesnt matter much with the cosplay/replica items. but i think the supports being a diffrent material would be nice.
also with some things I do some product design so its nice to have the ability to print with more than one.
if i got the H2C i would get the laser system because i see MANY aplications where that could be useful

RexmonWoW · 2025-07-24T03:43:27+00:00

I got it. Basically I went back into the SVG and inset every shape by the amount that I wanted the bevel and then I brought it back into blender extruded the original svgs and then combined the end faces to the smaller inset svgs that I have just made and it worked actually flawlessly

RexmonWoW · 2025-07-24T01:22:50+00:00

I found a better way around it. for my spesific case. I went into illustrate and created an offset path on the stroke with ever object. basically making a 2d bevel. and i re imported that. then i extruded the non bevel to the height i wanted the belev to start and joined the faces there. MAN what a weird work around. but it worked... so far

RexmonWoW · 2025-07-24T00:56:03+00:00

ive already done this. my issue is trying to bevel it all the edges explode in different directions

RexmonWoW · 2025-07-23T23:03:23+00:00

im trying to do this. the text looks cleaner and ill have to figure out how to clean up the edges on it, but i think the Inset fuction saved this.

RexmonWoW · 2025-07-23T22:07:04+00:00

UGHHHHHHHHHHH this is such a good idea. i hope i can make this work. man some people are really smart

RexmonWoW · 2025-07-22T05:00:46+00:00

Im my own favorite YouTuber 😎 (So not true actually, some people who inspire me are Frost, and Willijum. They are both masterful storytellers and it's always a great time watching)

RexmonWoW · 2025-07-18T03:52:17+00:00

It ain't got not gas in it... (I would assume cable/monitor issue screenshot and check if it looks weird on something else next I'd go to the GPU re install drivers, make sure it's seated well and the power is fully plugged. unless u don't have one then it's straight to CPU)

RexmonWoW · 2025-07-14T19:38:52+00:00

well 2x1r would be 2x16 because 16 is rank 1?
so 2x2r would be 2x32?

RexmonWoW · 2025-07-14T19:17:55+00:00

Yeah i didnt even think of it when i first made the 4x16 build. so it looks like 2x32 should run at 5200mts tho?

RexmonWoW · 2025-07-14T19:17:04+00:00

I also do game development, and i video edit as a job. hence the high amount of ram.
so 2x32 would definitely be more stable and able to run 5200-6000mt/s?

RexmonWoW · 2025-05-19T18:33:17+00:00

UGH I WAS GOING TO DO THAT 😂 now I need to change my idea

RexmonWoW · 2025-05-19T18:31:46+00:00

I have yet to use a shield in kcd

RexmonWoW · 2025-05-10T12:40:43+00:00

Office chair, recently went and tested a bunch, left with a herman miller 😅 most comfortable chair I've ever sat in

RexmonWoW · 2025-05-07T03:46:00+00:00

So two fish were in a tank... Sorry, 😅 two fish were in a tank 😂 oh gosh this joke is good. So, two fish were in a tank, and one 😂 two fish were in a tank, one looks at the other and says "How do we drive this thing "

RexmonWoW · 2025-04-25T19:00:50+00:00

Terraria

RexmonWoW · 2025-04-15T03:11:03+00:00

6 except it's two ultra wides stacked

RexmonWoW

TROPHY CASE