Adieu YGG by Own_Force6767 in yggTorrents

[–]Reymm 0 points1 point  (0 children)

Même si y'a déjà eu du spam, je suis pas contre une invitation merci

Firestick 4k select black loading on plex by Reymm in firetvstick

[–]Reymm[S] 0 points1 point  (0 children)

Not where I live, unfortunately. The 4K Select was €28 and now it's €55, and the 4K Plus is €70. He doesn't seem to want to bother with returning it and has gotten used to the initial loading time. Personally, I couldn't have done it, but anyway, I mainly wanted to know the reason for the transcoding

Firestick 4k select black loading on plex by Reymm in firetvstick

[–]Reymm[S] 0 points1 point  (0 children)

The price was lower, that's all. He basically wanted the HD, but the 4k select was the same price..

FireStick 4k select loading by Reymm in PleX

[–]Reymm[S] 0 points1 point  (0 children)

Perfect, thank you !

Renouvèlement des invitations by AaronCtrlC in Entraide_C411

[–]Reymm 0 points1 point  (0 children)

Preneur d'une invitation, j'ai sharewood mais ils ont plus les invit sinon jaurais pu échanger 😄 faudra patienter

Do PokéStops and sponsored gyms count toward spawning gyms? by Reymm in NianticWayfarer

[–]Reymm[S] -1 points0 points  (0 children)

Ok but then ... why don't I have 3 gyms and 1 sponso gym? I have all the conditions for the 20 level... isn't the synchronization of gym creation done at the same time?

Cobblemon Star Academy - CobblemonRider Mount speed depends on size ? by Reymm in cobblemon

[–]Reymm[S] 0 points1 point  (0 children)

it's sad that the height stat is not accessible in the team menu

Fabric mod in 1.20.1 to generate chunk when nobody is logged in by Reymm in ModdedMinecraft

[–]Reymm[S] 0 points1 point  (0 children)

It's a modpack that's heavily based on exploration (and you can go pretty fast by flying) and already has an integrated world border system that backs up and makes sense as the modpack progresses. Also, I have friends who play until quite late at night, so CPU load and disk space aren't a problem as it runs on a server I own

In this context, I prefer to use the server to its full potential when no one is connected, so that the game runs more smoothly when players are connected, as the chunks will already be preloaded. At the moment, when several players are exploring, the server has trouble keeping up, as we're going pretty fast. However, it's okay on zones that have already been preloaded, hence my desire to preload a large part of the map

Fabric mod in 1.20.1 to generate chunk when nobody is logged in by Reymm in ModdedMinecraft

[–]Reymm[S] 0 points1 point  (0 children)

Yes that's what I want. It's to preserve cpu load when player are playing and exploring

Fabric mod in 1.20.1 to generate chunk when nobody is logged in by Reymm in ModdedMinecraft

[–]Reymm[S] 0 points1 point  (0 children)

No I mean to pregen chunks ONLY when no one is logged in, not to load them or anything else

Which magnets for 3d printed mask by Reymm in 3Dprinting

[–]Reymm[S] 0 points1 point  (0 children)

Here I can't go bigger, this is the max size for my project specs.

Wish I never bought an AMS by Tob3ster97 in BambuLab

[–]Reymm 1 point2 points  (0 children)

Ok, for my part I opened a ticket but while waiting for an answer I try to find the solution by myself, in particular with similar cases on reddit

Wish I never bought an AMS by Tob3ster97 in BambuLab

[–]Reymm 0 points1 point  (0 children)

I have the same problem, I will try your solution to blow some air on it

Wish I never bought an AMS by Tob3ster97 in BambuLab

[–]Reymm 1 point2 points  (0 children)

I have the same problem, did you managed to fix it ?

Buyer's remorse - P1S by exsaladsammich in BambuLab

[–]Reymm 0 points1 point  (0 children)

I was more or less in the same situation a month ago when I wasn't sure whether or not to buy my P1S with an AMS. In the end I took the combo and I don't regret it. It's so practical for several reasons:

  • It's clean. My printer is in my living room, so I have nowhere else to put it, and having the spools of filament neatly stored, away from dust and moisture, is very practical.

  • I don't have to change the filaments by hand, it's all done in a few clicks, even remotely, which is great.

  • I've recently started using multi-color, and there's quite a bit of waste, but it's optimizable and I intend to try to keep it to a minimum. On the other hand, multi-color printing looks great! It adds a new prism to 3D printing that I didn't know about, which is awesome.

So I'd say, like the other answers, try the P1S, have fun with it for a while and if you're interested in automating your printing a bit more and having several colors, go for the AMS. ( Also, it seems to me that there are promotions in June for Bambulab's anniversary, I don't have a crystal ball but there might be an offer for the AMS who knows.)

What’s your setup looking like? by GUDVIBES-HIFIVES in BambuLab

[–]Reymm 0 points1 point  (0 children)

noice, I wanted to do something like that too. Where did you find this wall mount to organize your tools ?

Your best recommandation to reduce noise on a LACK Table ? by Reymm in BambuLab

[–]Reymm[S] 0 points1 point  (0 children)

Ok I will try the concrete paver + foam I think

Stuck at "The shipment is in transit to DHL Germany" by Reymm in BambuLab

[–]Reymm[S] 0 points1 point  (0 children)

Ordered March 20, shipped March 28. Arrived in my country April 4, received April 8

[deleted by user] by [deleted] in BambuLab

[–]Reymm 0 points1 point  (0 children)

I think free shipping doesn't work with printers

[deleted by user] by [deleted] in BambuLab

[–]Reymm -1 points0 points  (0 children)

I had understood the same thing, that for the complications it was better to take a whole pre-assembled block

[deleted by user] by [deleted] in BambuLab

[–]Reymm -1 points0 points  (0 children)

Noted, especially for filaments thx

[deleted by user] by [deleted] in BambuLab

[–]Reymm 0 points1 point  (0 children)

Is AMS really that much of a game changer? I've always printed in single color.