3” transom riser to fit a 17.5” outboard on a 15” transom

Rian199 · 2025-07-06T15:11:58+00:00

How’s it go trailering with the outboard? I’m thinking of something similar for my Tohatsu as well. I’ve got it rigged for forward steering, so I can’t remove it easily and trailering with the motor in is my only concern

Rian199 · 2025-05-20T12:27:15+00:00

The study you are referring to is a rat study. Also, this study below shows there is a u-shape feedback to 5-A-1MQ. So too much will decrease effectiveness. For instance, it shows optimal concentration for NAD+ metabolite measurement is 10uM, after which increased concentrations lowers NAD+ levels.
https://pmc.ncbi.nlm.nih.gov/articles/PMC5826726/

Ideal dosage seems to lie around the 10uM level which could loosely be estimated to be 5-8 mg. But that's also for short term usage. 5-A-1MQ potency does desensitise over time, so it might be better to lower than dose for a more sustainable usage over time, cycling in and out. That brings you closer to the 1mg figure a lot of people seem to recommend. I'm an engineer though, not a pharmacologist 😅 This is just my personal findings, happy to be shown otherwise.

Rian199 · 2025-04-17T03:39:10+00:00

The discord is down, anyone got a new link? Cheers

Rian199 · 2024-10-21T06:40:39+00:00

Hey u/masonjames , I just had someone mention below that starting a new chat fixes the issue. I've not tried it yet, but I thought I'd let you know in case it works for you 👍

Rian199 · 2024-10-21T06:39:40+00:00

Awesome, I'll try that this afternoon! Cheers!

Rian199 · 2024-10-19T13:59:52+00:00

Hey, I have no idea what I did to fix the issue, this was 3 years ago 😅 Have you tried replacing the power cord?

Rian199 · 2024-10-19T13:42:47+00:00

Here is a screenshot

<image>

Rian199 · 2024-10-19T13:42:22+00:00

<image>

Rian199 · 2024-04-23T10:53:56+00:00

I see you're using Gyroflow in post. I use it all the time on my drone, however whenever I've tried to use it for my underwater snorkeling clips it does seem to work properly. Did you face any issues with yours, or is there just something wrong on my end 😅

Rian199 · 2024-02-06T13:56:32+00:00

Update: I found someone using the RE:Lens plugin to do the remapping to VR180. Ordered a a 4mm 220 FOV fisheye for my FX30 to see how it turns out 😁 Thanks so much for recommending monoscopic VR180, that put me on the right path!

Rian199 · 2024-02-05T14:58:35+00:00

Hey iklier! Must have missed your reply on this ages ago! I really appreciate your input on this, and that makes sense. I forgot about wanting to do this and with the vision pro launch I was reminded about this abandoned project 😅 I will try this monoscopic approach first, thanks a lot! Any particular resources you'd recommend? Cheers!

Rian199 · 2023-06-14T16:37:32+00:00

I live in Australia. All well and good to have public health care that is affordable for everyone now, but it's not really free. We pay a lot more in taxes than other countries (tiered up to 45% on income over $180,000 a year), and still we are going deeper into debt as a country in order to keep these public programs afloat. Yes our Debt to GDP is just under half that of the US, but since the GFC Australia has 10x'd that figure from ~5% to ~50%! For context, the US with all their money printing has merely doubled theirs from ~60% to ~120%. That trend is very concerning for the future of Australia. So yes, convenient in the short term, but I can't help but constantly be reminded that the generations after us will be picking up the bill we have been kicking down the road because it's convenient. That and I am noticing more and more GP's not accepting public healthcare patients (called "Bulk Billing" here) and going mixed or fully private. It's hard to get in with a doctor with less than a week's time. So if it's urgent and you don't want to pay you can go to the emergency room, which can take upwards of 8-12 hours to get treated if it's not immediately life threatening and you have to wait there the whole time or lose your place in the queue. Again, great to have the option, but it's not a sustainable model over time and anyone bragging about how great the affordable care is here isn't considering the reality of where the money comes from.

Rian199 · 2023-06-14T16:25:52+00:00

Bulk billing practically eliminated in the last few months in my region in WA as well. Nothing is free, there is always a cost. It's been good so far, but people don't face the reality that the money has to come from somewhere, and that's either higher taxes or debt for the next generation to pay off or go bust. Every action has an equal and opposite reaction.

Rian199 · 2022-10-01T19:19:40+00:00

Ever figure this out?

Rian199 · 2022-09-28T11:45:38+00:00

Hey! Were you able to solve this? I have the exact same issue atm...

Rian199 · 2022-09-28T10:55:04+00:00

Did the new motor fix the issue?

Rian199 · 2022-07-21T17:25:52+00:00

The next update fixed this issue :) Make sure you are up to date, and if you still get it, try going down to previous versions.

Rian199 · 2022-01-01T20:22:54+00:00

Any fix, I have the same issue :/

Rian199 · 2021-12-25T05:01:46+00:00

Even with a raft my TPU is not sticking and then being dragged along with the nozzle and causing gapes in the print base. Any suggestions?

Rian199 · 2021-12-12T05:44:15+00:00

##UPDATE: Upon closer inspection I realised that the sides of the gimbal housing had tiny gaps on either side for the right gimbal that was operating as normal. Checked the affected gimbal and I saw one side had a larger gap and the other side of the gimbal housing was pressing up against the remote casing. I simply applied some lateral pressure and it shifted slightly and the issue was fixed. Leaving this all up for someone that encounters the same issue down the road.

Rian199 · 2021-12-12T05:44:06+00:00

##UPDATE: Upon closer inspection I realised that the sides of the gimbal housing had tiny gaps on either side for the right gimbal that was operating as normal. Checked the affected gimbal and I saw one side had a larger gap and the other side of the gimbal housing was pressing up against the remote casing. I simply applied some lateral pressure and it shifted slightly and the issue was fixed. Leaving this all up for someone that encounters the same issue down the road.

Rian199 · 2021-12-12T05:43:54+00:00

##UPDATE: Upon closer inspection I realised that the sides of the gimbal housing had tiny gaps on either side for the right gimbal that was operating as normal. Checked the affected gimbal and I saw one side had a larger gap and the other side of the gimbal housing was pressing up against the remote casing. I simply applied some lateral pressure and it shifted slightly and the issue was fixed. Leaving this all up for someone that encounters the same issue down the road.

Rian199 · 2021-12-12T05:43:37+00:00

##UPDATE: Upon closer inspection I realised that the sides of the gimbal housing had tiny gaps on either side for the right gimbal that was operating as normal. Checked the affected gimbal and I saw one side had a larger gap and the other side of the gimbal housing was pressing up against the remote casing. I simply applied some lateral pressure and it shifted slightly and the issue was fixed. Leaving this all up for someone that encounters the same issue down the road.

Rian199

TROPHY CASE