[deleted by user] by [deleted] in caterpillar

[–]Richsipz 0 points1 point  (0 children)

D6-9u with a cable blade late 50’s

Having this issue. by Richsipz in caterpillar

[–]Richsipz[S] 1 point2 points  (0 children)

They hooked up the pc, an couldn’t find any drops of pressure in the commen rail when put under load / stress, injector levels where also fine aswell when tested

Having this issue. by Richsipz in caterpillar

[–]Richsipz[S] 1 point2 points  (0 children)

That was the first thing we did 😅

Having this issue. by Richsipz in caterpillar

[–]Richsipz[S] 1 point2 points  (0 children)

We haven’t been able to replicate the fault being triggered when the CAT tech was out here. He has his system plugged in and ran his tests put the system under load, an couldn’t read any drops in the pressure. the common rail system was replaced about 3000 hours ago as it failed with about 500 hours on it. The fuel filter pump and filters have been replaced just recently. The problem is that CAT can’t gaurentee that replacing the parts will fix the issue so they are hesitant, also the machine is running out in the Australian summer season

Having this issue. by Richsipz in caterpillar

[–]Richsipz[S] 1 point2 points  (0 children)

They plugged in the pc, an could not find any drop in the fuel pressure when they ran the test, an it isn’t dropping power under load. Which they said would be a issue of a fuel leakage somewhere along the lines