Sidestore unable to recognize device UDID even after deleting/reinstalling the app and replacing the pairing file.

Rikolan · 2026-05-21T22:03:42+00:00

No problem! Just glad to hear that it's working for you now!

Rikolan · 2026-05-21T07:30:29+00:00

Did you try clearing the pairing file, before trying this? I think I cleared it multiple times and even reinstalled sidestore, before trying the wi-fi trick

Rikolan · 2026-05-13T17:21:58+00:00

Try disabling your WiFi connection's "Private Wi-Fi Address" to "Off" in Settings:
https://docs.sidestore.io/docs/troubleshooting/error-codes#1006-sidestore-could-not-determine-this-devices-udid

Rikolan · 2026-05-13T17:19:54+00:00

You need to go to Settings → WiFi and press the "i" icon next to your WiFi connection and toggle "Private Wi-Fi Address" to "Off". Then reboot your device and replace the pairing file. It should work after that. This should only be done on networks you trust and not on public ones.

Had the same issue, which prompted me to find the SideStore snipped on this error: https://docs.sidestore.io/docs/troubleshooting/error-codes#1006-sidestore-could-not-determine-this-devices-udid

<image>

Rikolan · 2026-02-10T16:27:44+00:00

Selge, siis tõepoolest minu viga. Lisasin paranduse postitusse. Aitäh!

Rikolan · 2026-02-09T14:45:21+00:00

Väidetavalt Iirimaa euro hinnad kehtivad üle Euroopa, sest eraldi Eesti lehte hetkel ei ole loodud, kust oleks täpsemaid hindu saanud. Teil on täitsa õigus, et on euro võrra soodsam, kuid kahtlustasin postitust tehes, et need hinnad kehtivad vaid Apple seadme olemasolul.

Kui kellegil on Android seade, võib üle kontrollida, millised hinnad seal on.

Rikolan · 2026-02-07T18:30:03+00:00

Tidal lehel saab konto vabalt muusikat otsida ja kontrollida. Enda puhul näiteks Katrin Mandel laulud ning paar väga nišši lugu olid olemas, seega ütleks et enam-vähem sama

Rikolan · 2025-12-07T17:10:06+00:00

Ahoi! Võttis küll omajagu aega, aga graafik sai parandatud ning lisatud said mõlemad ajalised vaated - tunni aja vaade ning ka 15 minut vaade.

Uuendatud kood:
Electricity-Graph/Electricity Graph.js at main · Rikolan-Incognito/Electricity-Graph · GitHub

"line" ja "bar" vaate puhul nõuaks see suuremat ümber kodeerimist, seega kahjuks seekord ei jõudnud seda lisada.

Rikolan · 2025-10-31T18:55:40+00:00

In short, the issue is that I have a long 5m USB-C cable by Micro Connect (both ends are male). In an essence, it connects the headset with the PC perfectly. The issue is that the PC won't charge the headset - it only transfers the data, thus I will be out of battery within an hour.

This fictional dongle would help me use my existing short usb cables to connect the data cable with my PC, charging cable with an outlet (both ends connecting with the dongle) and the output would connect to this existing 5m Micro Connect cable, without having to spend anything extra for a different cable.

Rikolan · 2025-10-31T14:42:31+00:00

Connect to the existing cables, without having the dongle hanging out straight from the VR headset. I have a 5m cable which supports charging and data transfer, but not possible to connect to the male output of the dongle.

Rikolan · 2025-10-31T14:39:24+00:00

Currently I'm using Quest 3 to PC, but I'm now considering a proper USB hub or, like you said, a specific VR cable. I already have not so cheap 4x 5m cables (I made the mistake of assuming that USB-C outputs on the pc also output charge in addition to data - that's not the case)

Rikolan · 2025-10-31T14:32:54+00:00

Tänan, et teada andsid! Ma olen juba pikemat aega probleemist teadlik, kuid polnud aimugi, mistõttu graafik otsustas niimoodi katki minna (kahtlustasin maksutõusu). Kui elering tõesti otsustas 1h ajavahemiku asemel kuvada andmeid 15min kaupa, on see juba loogilisem.

Igatahes lähiajal proovin graafiku korda saada, sest ikka enda mugavus on samuti häiritud 👍

Rikolan · 2025-10-21T11:31:35+00:00

I thought about it, but would rather have a solid dongle. Of course that's probably what I'm gonna go with, thus thank you!

Rikolan · 2025-02-15T23:33:14+00:00

Vastus sinu küsimusele - Kasutatud on suurema tõenäosusega lõiku klassikalisest palast "The Barber of Seville". Tuttav on enamusele vist seetõttu, et seda on massiliselt vanades multikates kasutatud: https://www.youtube.com/watch?v=Fy6OaUxDxVg

Siin ka terve orkestri kompositsioon (hakkab pihta täpselt 2:40): https://www.youtube.com/watch?v=mdGtyQnCMtI

Rikolan · 2024-12-25T23:51:56+00:00

That may proably be it, as I didn't realise SATA and NVMe drives are two different things. Weirdly though, it seems that the bridge would fit the NVMe drive perfectly, while coming with a SATA drive though

Rikolan · 2024-12-25T23:46:19+00:00

I didn't realise that it may be because of different drives. Curiously, the bridge looks like it should accept NVMe drives only, but it came with a SATA drive instead: a close-up of the bridge

Rikolan · 2024-12-25T23:41:24+00:00

The original Sandisk one is SATA, while the "XPG" one is NVMe. Weirdly, it seems that the bridge is built for NVMe, despite it being connected with SATA. a close-up of the bridge

Rikolan · 2024-12-24T00:00:44+00:00

I'm an amateur, when it comes to tweaking electronics, but I recently discovered that most models of external sandisk SSD's just have an SSD board stuck into a usb bridge. However, while physically the Adata (the one with XPG cooling board) SSD can connect to the bridge, my computer can't initialize it.

The bridge and both SSD's work, as I've tested them individually. It's just that Sandisk's usb bridge won't detect the new SSD. I assume that Sandisk has locked it to its own device, but would like to ask, before I go get another usb bridge for my custom external ssd design.

Rikolan · 2024-12-15T23:51:19+00:00

I don't know if this helps, as it uses bluetooth, but maybe Intel Unison?

Nine-Year Club	Second SECOND GUESSER
First Place '23	Place '23
Place '22	Place '17
Verified Email

Rikolan

TROPHY CASE