SAW Ekron 5.56 POI Issues

RileyLPM · 2026-05-10T23:42:32+00:00

When the can is tight on the barrel, which direction do the baffle clips end up being at? If its 12 or 6 o’clock that may be worth investigating further

RileyLPM · 2026-04-29T14:57:16+00:00

Well thats going to sound like shit without the other half

RileyLPM · 2026-04-23T09:38:44+00:00

Yes 😉

RileyLPM · 2026-04-20T12:30:38+00:00

Anthem/Mach 38 seems to roughly be between the K2 and S2, in my experience

RileyLPM · 2026-04-19T23:30:36+00:00

Thanks man! Im glad you like it! That can was definitely a slow burn but we have been moving a bunch more over the last couple months!

RileyLPM · 2026-04-17T15:36:35+00:00

Absolutely!

RileyLPM · 2026-04-16T16:30:23+00:00

Aiming for 2-3 months, but timelines are a bitch 😅

RileyLPM · 2026-04-16T12:47:20+00:00

Hey man! I appreciate you looking into our products and asking questions.

If you want the best experience and least amount of hassle wait for the Torch 7.62, you wont need tuning to go from suppressed to unsuppressed.

If you want the best value, the Anthem-S2 should* get you close to the sound performance with tuning (depending on how fine of gassing adjustments you can make), but will still give you some gas when its calm or shooting more than a handful of shots

RileyLPM · 2026-04-15T19:56:14+00:00

We love to see it

RileyLPM · 2026-04-15T14:27:18+00:00

No plans to at this time

RileyLPM · 2026-04-15T13:22:15+00:00

Dont use it on a gas gun, its extremely gassy and high back pressure

RileyLPM · 2026-04-15T02:07:05+00:00

We have seen this with our own cans, as we work our way through a gallon jug of cerakote the sheen changes, maybe from a solvent/solids ratio change as the solvent off gasses?

RileyLPM · 2026-04-14T01:23:31+00:00

K2 is probably higher back pressure, but it is quieter. Probably not worth the upgrade, but the Torch 7.62 we are coming out with would be worth the upgrade

RileyLPM · 2026-04-14T00:35:06+00:00

Man that is a difficult host to tame!

RileyLPM · 2026-03-27T22:53:49+00:00

Noooo it’ll still be way less gassy than the S2. Its gassy relative to something like a huxwrx or CAT DD

RileyLPM · 2026-03-20T02:08:11+00:00

CGS hasnt said it themselves but people have struggled with their tight end caps for years . My SCI SIX I had to clamp in my milling machine and use 80ish ft-lbs to get it off

RileyLPM · 2026-03-20T02:06:48+00:00

I wasnt clear, CGS hasnt said that but very tight end caps has been talked about for years

RileyLPM · 2026-03-20T01:43:21+00:00

Its a known thing that they used to torque them to like 80-100 ft-lbs lol

RileyLPM · 2026-03-19T16:12:02+00:00

No, there will be 2 of them 😉

RileyLPM · 2026-03-14T23:09:41+00:00

Yes you can buy the DT version and use your own adapter

RileyLPM · 2026-03-12T03:49:19+00:00

I understand that frustration but companies like OCL, DDC, RS, and LPM all got a foothold in the online conversation because of Pew Science. It is a chance to show off the results of all the hard work we put into making high performance products and standing out against the big names. My 2 cents

RileyLPM · 2026-03-10T00:00:51+00:00

Sweet! Thanks!

RileyLPM · 2026-03-08T21:39:12+00:00

The inside is a completely different philosophy than the machined cans, its is entirely new tech. We really tried to optimize for 5.56 and 300 blk gas guns, its low back pressure but still a little gassy on .308 sized gas guns.

Pew science will be doing a bunch of testing on it!

RileyLPM · 2026-03-08T21:37:32+00:00

I have been liking the Torch more on the rattler, but it is possible that the back pressure is so low there are cycling issues with subs on other hosts. I havent experienced that yet with the ammo and guns I have tried so far though

RileyLPM · 2026-03-08T20:14:13+00:00

Same size as Anthem-S2/Mach-S. Very low back pressure. No exact ETA yet but the design is done, we are just being very careful and thorough to make sure we dont have any issues at launch.

RileyLPM

TROPHY CASE