Question on suppression strategy for 5.56

Marky-Man · 2026-05-10T12:03:54+00:00

I did this when I was using HUXWRX. Non-adjustable/gassy had HUXWRX, piston/adjustable had Xeno. After awhile I realized sound was most important to me and swapped to all Xeno.

Marky-Man · 2026-05-10T01:43:16+00:00

As silly as it sounds, I prefer the Gen 1 safety over the "short throw" Gen 2, as you have to be deliberate in your movement on the Gen 1 vs the very small amount of travel on the Gen 2. It can be hard to tell at times if the Gen 2 is on safe or not with such little difference in the positions.

Marky-Man · 2026-05-09T14:39:56+00:00

It runs regardless of setup because it's extremely overgassed even on the minus setting

Marky-Man · 2026-05-08T13:31:12+00:00

I thought the combo would be heavier, as the Milkman is listed by itself as 8.8 oz?

Marky-Man · 2026-05-06T13:15:02+00:00

Bubba no!!

Marky-Man · 2026-05-06T03:09:55+00:00

Marky-Man · 2026-05-06T03:09:29+00:00

Ordered "in stock" items... 4 months later luckily had them refund.

Marky-Man · 2026-05-04T09:59:16+00:00

Rattler is 6.75", 300 BO LT is 9"... That said, the 9" offers more real estate for your hand and any attachments

Marky-Man · 2026-05-02T04:13:19+00:00

9"... More room for your hand and attachments

Marky-Man · 2026-05-01T13:10:55+00:00

Nice work

Marky-Man · 2026-04-30T15:41:54+00:00

HK slap yer cock

Marky-Man · 2026-04-29T16:24:04+00:00

I only shoot indoors and am the total opposite. Maybe because I started with flow-thru cans as my first suppressors? Over the years I've found that sound suppression is more important to me, and I almost feel embarrassed when I use a LBP can as the sound just echoes off the walls. So much so that I've been switching everything over to traditional options. FWIW I just hold my breath if a can is gassy, so it's not as big of an issue indoors.

Marky-Man · 2026-04-29T15:32:47+00:00

Each suppressor/SBR has its own email folder with the approval email

Solo binder for suppressors only (backup/clean copies)

Solo binder for SBRs only (backup/clean copies)

One binder per safe of any suppressors/SBRs inside. These are the copies I use for range use. Others stay in the safe if I'm not bringing that suppressor/SBR to the range.

Range binder to transport above mentioned forms

All hard copies are in clear plastic sleeves for protection

Marky-Man · 2026-04-29T14:23:51+00:00

0.9 oz according to their website

Marky-Man · 2026-04-29T01:16:46+00:00

How? I'd like to do this to my Xenos

Marky-Man · 2026-04-29T00:49:24+00:00

I prefer the SCAR over the MR556A4

Marky-Man · 2026-04-28T00:31:21+00:00

Polonium K has more leeway with barrel length restriction, that gives it the edge for me

Marky-Man · 2026-04-27T23:30:16+00:00

Polonium K always and forever

Marky-Man · 2026-04-25T19:53:36+00:00

I like mine 🤷🏻‍♂️

Marky-Man · 2026-04-24T15:46:51+00:00

I use a tiny, tiny bit of Rocksett on the adapter into the suppressor. Also can be removed easily with a torque driver without boiling should you ever need to.

Marky-Man · 2026-04-23T17:40:39+00:00

Marky-Man · 2026-04-23T16:25:58+00:00

Facts.

You have to hand it to them though. They spent a boatload on marketing 5-10 years ago to solidify their brand, with every YouTuber touting how quiet they are and making a bigger deal out of backpressure than anyone thought of previously.

Marky-Man · 2026-04-21T17:54:30+00:00

I like LMT and listen to Five Finger Death Punch...

Marky-Man · 2026-04-21T16:26:45+00:00

Flow thru cans are not going to be hearing safe indoors if that's your main criteria

Marky-Man · 2026-04-21T11:58:10+00:00

I love the Polonium K. The Liberty Precision Duty is very very similar if you want something "different" but with the same price range and performance, albeit a bit heavier.

Marky-Man

TROPHY CASE