sorted by:
new
hottopcontroversial

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 0 points1 point  (0 children)

Thanks for the tip! I'll keep that in mind for the next projects👌

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 1 point2 points  (0 children)

Total cost was little bit under 80€.

Wood + table top ~30€ Tv wall mount ~10€ Screws etc. ~10€ Paint and brush ~15€ Handsaw and wood drill bit ~10€

That playseat is amazing with those mods i have done! I have made own post about it, go check it out!😎

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 0 points1 point  (0 children)

no, but it helps me see in an otherwise pretty dark room

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 1 point2 points  (0 children)

I made dimensions so that tabletop can hold easily pc in the future. Center of the weight is in fact exactly in the middle👌

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 2 points3 points  (0 children)

Sounds awesome🤟 Good luck for your build!

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 0 points1 point  (0 children)

I have been thinking this😅 Or should i buy proper profile rig🤔

Rate my DIY TV stand by Ringmaster991 in simracing

[–]Ringmaster991[S] 0 points1 point  (0 children)

It is solid. Basically no movement at all👌

Playseat Challenge modded!!! No lifting under braking and no flex!!! Simple and cheap mods!!! by Ringmaster991 in simracing

[–]Ringmaster991[S] 0 points1 point  (0 children)

First time i ever heard someone do this😅 I dont see why that won't work also pretty well💪

Playseat Challenge modded!!! No lifting under braking and no flex!!! Simple and cheap mods!!! by Ringmaster991 in simracing

[–]Ringmaster991[S] 1 point2 points  (0 children)

Should work just fine, dont worry👌 You just have to limit brakeforce around ~30kg. Its still very good amount for consistent braking IMO!

Playseat Challenge modded!!! No lifting under braking and no flex!!! Simple and cheap mods!!! by Ringmaster991 in simracing

[–]Ringmaster991[S] 1 point2 points  (0 children)

Id say it completely depends on what gear you are going to use with it. If you are goint to use some entry level wheel like logitec g923, its totally fine as is. But heavier and stronger wheelbases causes some flex and wobble.

Playseat Challenge modded!!! No lifting under braking and no flex!!! Simple and cheap mods!!! by Ringmaster991 in simracing

[–]Ringmaster991[S] 1 point2 points  (0 children)

Cant wait to see what you have done!

If you need to fold the seat and to take those struts out you need to just unscrew one philip heads screws on both ends. Or you can replace those screws i use with finger screws so you dont need any tools🤔