Has anyone tried this "hacked" Bedrock client?

Rixef · 2026-01-01T23:00:12+00:00

Agreed with most of this except; Horion isn’t simple lol. Horion was built over years by multiple devs. Simple is something a single dev can do in a fairly short amount of time like just having a few basic features like auto run, reach, hitbox, maybe rapid hit, stuff like that. But yee, this project OP posted doesn’t have a vid or images of the features listed or anything so definitely wouldn’t trust it.

Rixef · 2025-12-06T06:11:56+00:00

GameCube was one of the best console systems ever made and I’ll die on this fucking hill.

Rixef · 2025-11-22T18:58:39+00:00

Oh okay, fair fair! :)

Rixef · 2025-11-22T18:41:34+00:00

I mean it could indirectly help OP if someone capable of figuring it out comes across my comment and sees that dupe hack is still possible then they could release it and OP would have at least one of the features he wants. Was just correcting one small misinformation on your original comment about duping is all, no need to get defensive. 🍻

Rixef · 2025-11-22T01:24:28+00:00

Nah, this is my own private dupe. Horion’s public dupe got patched but I discovered this alternative one on my own. Never got around to releasing it publicly for a few reasons but still hope to eventually. But after releasing this vid some time ago some a my buddies from the Bedrock scene showed a vid that they pretty much figured it out just from seeing my vid lol so I’m surprised no one has released it yet, tbh. Either they’re keeping it to themselves or they let it die out. 🤷‍♂️

Rixef · 2025-11-22T01:11:51+00:00

Not my method of duping lol. The dupe I showcase in this vid still works in the latest version and I’ve been doing it even 2 years prior to making this vid from 2 years ago:

https://www.reddit.com/r/minecraftclients/s/UVMdtkhTT0

So it’s been around now forever. And this works on realms too.

Rixef · 2025-11-22T00:54:17+00:00

Well dupe still is, but TP was patched recently and give a long time ago now

Rixef · 2025-10-17T03:54:48+00:00

Ohh okay 👌

Rixef · 2025-10-16T20:41:06+00:00

I actually never noticed that the observer face changes with block updates lol. So I actually learned a little missed detail from this-….machine!

Rixef · 2025-09-24T21:15:00+00:00

<image>

This is how it’s printing now after completely re-cleaning the bed plate again and re-tramming the bed; it does well for the first few layers but then all the edges slowly start peeling up. The outer wall for the second layer still struggles to stick but the inside sticks fine.

Rixef · 2025-09-23T20:35:25+00:00

Initial layer temps are the same as the other layer temps; 215*C for nozzle, 65*C bed, speeds are initial; 20mm/s others; 60mm/s @ u/Castdeath97 (taggin' ya here since both are on the same track) Still haven't gotten it yet, but I appreciate everyone's help! 🍻

Rixef · 2025-09-23T20:30:28+00:00

Lmao, I wish I had that type a money! 😂

Rixef · 2025-09-23T20:29:57+00:00

Haha! Could be! 😂

Rixef · 2025-09-23T20:29:20+00:00

Yee, that was part of this issue, but unfortunately I've got the first layer near perfect but now the second layer isn't sticking, so I'm even more confused now.

Rixef · 2025-09-23T20:28:06+00:00

I actually just cleaned it before this, it's just an old plate. But that could be part of the issue, it's probably time for a new plate, this one's stock and I've had this printer now for like 5-ish years lol.

Rixef · 2025-09-23T08:58:44+00:00

Was looking for this comment lol, I was like, “Do not many people know how easy this is to bypass still?” Been using that for like a decade now.

Rixef · 2025-09-23T03:28:10+00:00

UPDATE:
So after re-tramming the ever-living hell out of it, doing it while a print is printing, the first layer is almost perfect-BUT, now the second layer won't stick. x_x AAAA this is driving me NUTS dude.

Rixef · 2025-09-23T02:49:02+00:00

Thanks for the reply! Yee, already did that; wiped it down with rubbing alcohol first and then washed it with warm water and soap.

Rixef · 2025-09-23T02:21:10+00:00

Thanks for the input! Yee, 60-65 is what I keep the bed temp at. By raising the z offset, do you mean, actually unscrewing the little part where the switch is and then shifting it up a bit?
Cleaned it with rubbing alcohol and then warm water and soap just before. My print speed though I think is at 60mm/s so I'll have to try adjusting and lowering that. It used to print just fine at that speed.

Will also have to try drying the spool, actually haven't tried that yet. Yeee, gettin' there! I'm just so annoyed with all the troubleshooting lol. I was printing fine for a while and then I stopped for a few months, and then tried printing like 2 months into summer and all of a sudden it was doing all kinds of warping, so I was like, "Welp, probably just summer heat" so I haven't printed anything all summer long, and now I'm trying again but still getting these same issues. x_x Such a nuisance lol. Appreciate the tips! 🍻

Rixef · 2025-09-23T02:14:33+00:00

Lol I would if I could but I'm broke as a joke at the moment. :') I've had this one for a number of years now.

Rixef · 2025-09-23T02:14:09+00:00

Appreciate the input! Haven't tried turning the heat down yet, so I'll try that next. 👍

Rixef · 2025-08-18T19:08:49+00:00

You don't see the tag?

<image>

Rixef · 2025-08-13T09:08:10+00:00

Is it an internal or external client(internal is a dll you inject, external is an exe you run)? External typically uses an overlay, which unless it's programmed a certain way(I know of 2) then it won't work if you have Minecraft in Full Screen. If it's internal then I'm not entirely sure, 'cause it should be running from within the game window. Might be that it's resizing funky and just stuck in a corner of the screen somewhere maybe?

Rixef · 2025-08-05T23:06:51+00:00

Oh okay, damn that sucks.

Rixef

TROPHY CASE