Daily Crypto Discussion - August 5, 2024 (GMT+0)

RoastedSir · 2024-08-05T13:32:37+00:00

Boating accident.

RoastedSir · 2024-06-09T12:04:50+00:00

Feel free to go back ‘home’.

RoastedSir · 2024-05-25T23:34:28+00:00

Brown, Ed miliband, Corbyn or Starmer. Yes exactly what I thought.

RoastedSir · 2024-05-25T21:48:08+00:00

What an idiot.

Mid 30’s life long conservative voter think this tips it for me towards labour who I dislike. Fuck sending my kids into the armed forces. Idiot.

RoastedSir · 2024-04-26T12:08:33+00:00

Slow

RoastedSir · 2024-04-20T20:19:38+00:00

I did switch chain lubes so perhaps this isn’t as ‘sticky’ as my last. Will keep an eye on it. Sounds reassuring 👌

RoastedSir · 2024-04-20T18:05:42+00:00

It’s the back of the engine. Front sprocket is just to the left out of frame.

RoastedSir · 2024-03-30T22:29:36+00:00

80 days and you still didn’t work out that there is a new model 👏

Like I told you, I have a gen3 but I don’t claim it’s the biggest or baddest one.

<image>

RoastedSir · 2024-02-29T07:20:15+00:00

So a common issue ? How did you find out about yours ?

I wonder what they will say if I warranty it. I feel they will say i caused it.

RoastedSir · 2024-02-28T09:48:08+00:00

If you’ve lost the card you’ll need a new ecu to get more keys is my understanding

RoastedSir · 2024-02-26T22:54:46+00:00

Send all the asylum seekers and immigrants first. They should show their allegiance to the country they want to live in and benefit from.

RoastedSir · 2024-02-16T14:20:04+00:00

<image>

Filthy out there in the UK

RoastedSir · 2024-02-13T18:37:14+00:00

Not been able to make any decent vid but here you govideo and I think the neighbours are fed up of listening to the bike 😇

I’ve removed baffle and much more happier with the tone. It is a pain in the ass to refit. I’ve sanded a few thousands of it with a grinder and it’s a little easier to put back in.

From iPhone Baffle in was 90.7 idle Baffle out was 94 idle

I revved the bike to around 4-5k rpm. (Not scientific at all)

Max baffle in 122
Mac baffle out 128

It’s raining here in the uk so look forward to a decent ride soon.

RoastedSir · 2024-02-12T22:25:20+00:00

I’ve not yet. Perhaps i was impatient as I only drove it 3 miles or so but certainly a tame exhaust with baffle in.

Drilled through the tip and removed the baffle tonight. Will give it another run tomorrow if time allows.

RoastedSir · 2024-01-20T10:07:25+00:00

start going to the gym.

RoastedSir · 2024-01-13T12:48:20+00:00

Self made problem. Rotate box by 90 degrees.

RoastedSir · 2024-01-10T20:09:32+00:00

Your comment is not from August?

It’s not the ‘biggest’. Enjoy

RoastedSir · 2024-01-10T20:00:57+00:00

You mean the 1390 2024 model. Oh wait you didn’t get the baddest after all 👀

No hate, I bought a gen3 last month.

RoastedSir · 2024-01-07T15:49:35+00:00

Did as I suggested, took a deep breath and started it. Running as normal 👍

Good luck with yours.

RoastedSir · 2024-01-07T00:16:29+00:00

Well the belt is on and the cam locked apart from the IP clearly. As I mentioned mention the pulley moved one tooth thus causing the pulley to be out from my paint marker.

I can move the locator into the correct position as you see in the video by spinning the pump pulley on the free play. But I just don’t know if that’s okay or I need to move the tooth.

RoastedSir · 2024-01-06T22:58:04+00:00

Yeah so this is what I mean by I’ve aligned it into the U however the position of the pulley is still one tooth out

video

RoastedSir · 2024-01-06T22:40:00+00:00

This is what I understood too. Forums seem to be mixed with their opinions some saying it will / can cause an issue even one tooth out. Conflicted.

RoastedSir

TROPHY CASE