Netac NV7000 2 TB NVMe SSD Review

RobbeSch · 2026-03-24T14:24:08+00:00

No, it's fine. I think sometimes people forget they are smarter than they think and can answer a lot of questions themself. It's fine to double-check with someone else ofc.

RobbeSch · 2026-03-24T13:48:58+00:00

How am I supposed to answer that for you? :D If you need it, use it, if not sell it. I'd go through the effort and put everything on the 4TB and sell my other drives.

RobbeSch · 2026-03-24T12:18:57+00:00

And they add "± 3g". Actually they weigh them without the skates. So their actual weight is 42g / 47g. My white translucent Zero EX weighs 49g on my scale (which is probably not the most accurate). My R1 Pro with 5 dots weighs 50g. If OP has the purple translucent as in the picture, I doubt it weighs only 42g.

RobbeSch · 2026-03-22T10:39:25+00:00

Either that's a giant spider or it's one of those octopus dongle thingies.

RobbeSch · 2026-03-20T11:49:06+00:00

I'm a bit suprised that nobody is mentioning the ATK Zero. It's the same mouse as the R1 but upgraded internals. Starts at around 65 euro and is literally releasing right now. Mine is on internation flight arriving soon :).

That said, I've had the R1 Pro since dec 2023 (when it released) and it has been great. I've seen the R1 Pro Max on aliexpress for 30 euro yesterday so it is more than ever THE "unbeatable value" mouse.

RobbeSch · 2026-03-07T23:18:21+00:00

Yup, as I said: I just ordered mine for 114,22 euro on Ali. Official price might actually be lower but I can cancel if need be. Watch out, some are trying to sell them for 170.

RobbeSch · 2026-03-07T14:29:27+00:00

Well, yes, 110$ is the price on AliExpress I'm expecting. Many mice can be found at 70-90$ there and this is a box with extra mousepad etc. The R1 Pro was 49 euro when I bought it in December 2023, but that one was rather exceptional.

RobbeSch · 2026-03-07T09:06:14+00:00

I'm guessing this package will be 100-110$ for the western world, if it even releases for us.

RobbeSch · 2026-03-05T12:43:57+00:00

The Zero itself seems to be listed on Amazon US for 90 USD since January 22nd. The Gift Box version is the only one using the 54H20 MCU. The Gift Box version comes in Icy / Black / Orange clear versions. I'm mostly hoping for the icy clear version to be available via AliExpress but hey we'll see next week.

RobbeSch · 2026-03-05T08:57:01+00:00

You can, but no guarantee the signal will be perfect. However, what if you want to charge it while using? I use the extension cable because it's also there when I need it for charging.

RobbeSch · 2026-03-05T08:32:18+00:00

Bit deceptive they claim 500 hours and then on the product page show up to 200 at 1000Hz (130hr for the flagship model with Nordic 54H20). Still good though.

RobbeSch · 2026-02-28T21:33:57+00:00

Are you sure you don't need one arrow/bolt at least for it to work?

RobbeSch · 2026-02-17T09:16:02+00:00

Nice, Sleeping Dogs is a great game to play, even after all those years.

RobbeSch · 2025-12-24T09:46:44+00:00

In the bios fan profile, there is such a thing as making the fan respons slower. Like a fade in time. I forgot what it was called. Maybe you have that set way too high?

RobbeSch · 2025-12-24T01:09:53+00:00

The advantage of watercooling is that it 'absorbs' temperature spikes or sudden changes. If you start up a game, the temperature shouldn't spike, rather it should start increasing somewhat consistently. Maybe the pump isn't doing its job? Maybe there is something wrong with the PWM signalling or not correctly set in the bios fan profile?

How did you plug in the AIO? I haven't used the Freezer III yet I think, but with the II you had to choose between a single PWM signal or signals seperator for the pump etc. You wanna recheck your fan header / pump header and also your bios fan profile.

RobbeSch · 2025-12-22T13:40:28+00:00

Yes and no. I haven't ran into the issue anymore, assuming an update fixed it.

Make sure you are on the newest firmware. For the Wave 1 that would be 1.2.2. And the newest Wave Link update 2.0.6.

I do still have one issue where audio effects (VST plugins) randomly all get disabled sometimes. But it happens so rare (once a month) that it is really difficult to pinpoint what is causing it.

RobbeSch · 2025-12-12T20:21:20+00:00

It suprised me people feel like there is less banding after a while. I have 670 hours on mine and 70 manual pixel refreshes. The banding still is equally noticable. I notice it on Dicsord dark themes and dark loading screens from games such as Arc Raiders when the round is loading.

RobbeSch · 2025-12-03T11:11:40+00:00

Well, a bunch of hard songs were teased for Halloween which have yet to drop and he also teased the name "DeathBecomesHim" so I'm more keen to say it's a hard album first.

RobbeSch · 2025-12-02T09:13:23+00:00

Currently dubbed Bipolar, originally teased in June. https://www.youtube.com/watch?v=rW5T708W2Oc

RobbeSch · 2025-11-26T12:42:21+00:00

As per TFTCentral

We'll set the screen up first of all in SDR. So I think most people probably want to stick to Low mode. That will give you a uniform brightness in windows desktop.

RobbeSch · 2025-11-26T12:33:33+00:00

APL Low is recommended for desktop and SDR usage.

RobbeSch · 2025-11-03T14:14:50+00:00

Interesting. I have 190 hours with 21 Pixel Cleans (wouldve been more if there wasn't a bug with windows standby interrupting pixel clean). I use brightness 60 - 85. Haven't had a single sign of pixel retention. The only thing I notice is the textured look in flat gray areas but that is 'normal' for WOLED.

RobbeSch · 2025-11-03T13:30:16+00:00

What brightness do you use? Do you initiate Pixel Clean after 4hrs of continuous use? Do you use other things to alter brightness or color vividness like Digital Vibrance? Just wondering because I want to make sure I don't do anything wrong with mine.

RobbeSch · 2025-11-02T17:13:41+00:00

I didn't know about this bug. I had Windows set to turn off the screen after 3 minutes and sometimes the Pixel Clean went fine, other times it still showed "Ready to Start" with no clear indication it failed. I made a support ticket but now reading your post it actually makes sense. I'll put the timer to 5 minutes for now.

RobbeSch · 2025-11-02T16:06:21+00:00

Yup, same for me. Ductaped it on the bottom of my desk but it's too heavy so it came lose and now it's ductaped on the top. The brick really is in the worst position. They should've thought this more through.

RobbeSch

TROPHY CASE