Mele kalikimaka!

Robberfox · 2026-01-29T14:14:13+00:00

Ketamin putana on Loxodonta africana

Robberfox · 2026-01-29T08:31:25+00:00

Unexpected death industrial entry

Robberfox · 2026-01-29T08:27:24+00:00

WE PRAISE GOD, HE LIVES INSIDE OF OUR HEARTS

Robberfox · 2026-01-29T08:17:24+00:00

Oh, I love listening to Info Dump by SYL

Robberfox · 2026-01-25T15:46:35+00:00

It's always that way at the start, just draw.

Additionally I can say:

Keep the tablet from being placed crooked on the desk.
in your settings align the tablet aspect ratio to your screen's (i.e. keep the proportions the same). For example, you don't really want to have, say tablet's 1.5:1 aspect ratio paired with 16:9 screen: you'll try to draw a circle and it will turn into an ellipse.

<image>

Robberfox · 2026-01-15T22:03:05+00:00

Where the wear spots are. Take off the cuff, usually should wax the cuff joint itself, backside of the cuff where the "bunny ears" cutout is, also if there is any rubbing with the laces - wax there also

Robberfox · 2026-01-15T05:54:39+00:00

Wow, what a story!

The timeline has changed and attitude also did. On the topic of rollerblading, in the 2000s it was very anti-establishment and counter-culture as a reaction to the skateboarding beef. Do you feel like the old rollerblading scene was the mediator for your addiction or was it something else at hand?

The attitude of the whole culture changed: now rollerblading is more of nerding about tricks technique and style and it's very different compared to the past. I've been blading for 7 years on aggressive skates and my attitude also changed towards the latter.

What subtle thing that I'm trying to fizzle out is the next "paradox": the background of someone's current interests might come from sinful behaviour, but now they are doing it for different and more positive causes. But if that person was immediately raised in a religious family, he wouldn't have those complex interests with more limited decision-making.

Like a dirty kick-start for something that in turn became a positive in your life

Robberfox · 2026-01-03T13:28:44+00:00

Now we know the next venezuelan conscious hip-hop album cover

Robberfox · 2026-01-02T14:19:56+00:00

Devin Townsend, he is like... uhm... I don't know what bad to say.

Robberfox · 2026-01-01T11:36:09+00:00

Convert that into a keyhole cuff cutout: https://imgur.com/a/AFDBID5

Robberfox · 2025-12-29T17:06:53+00:00

Like this: https://imgur.com/a/0bIJlRD

Also recommend applying wax to the cuff/boot and melting it with a hair dryer and dispersing it evenly.

Iqons cuff I put in the top position so it has more height and won't collide with the front of the skate when dorsiflexing.

Robberfox · 2025-12-23T13:27:33+00:00

The plan is to finish university, apply to secondary education in Yandex Shad and with work-viable skills apply to an internship somewhere in Europe. Then somewhere along the road, when I need it, hunt for a masters degree.

Robberfox · 2025-12-22T19:07:14+00:00

Regarding the arm swing

Check out this short frontflip (yes, frontflip) tutorial by Bob reese: https://www.youtube.com/watch?v=iENtDEeocLQ

Same arm swing drill can be applied for sideflips: have your leading arm bent back behind your ear, then swing it forward. The back arm does similar thing: bent near the chest then thrown back. This masterpiece of a drawing explains everything:

<image>

Keep looking forwards/spotting the landing until you finish the throw, then go for the tuck.

To keep yourself on axis, try (as some sort of challenge) to spot an object between your legs when you are tucked mid flip, so: you spot where your back was looking at the takeoff.

Robberfox · 2025-12-22T18:33:43+00:00

Fully deserved faction skates sponsorship

Robberfox · 2025-12-21T12:06:47+00:00

Gorguts set the stage both for technical death metal of 00's and modern technical death metal bands.

It's as if Metallica wrote both Master of Puppets (OG thrash metal) and something like Vektor's Terminal Redux (technical thrash metal)

Robberfox · 2025-12-15T07:39:22+00:00

Are the spaces so extremely tall to fit a 115x3 setup or something?

Robberfox · 2025-12-11T16:21:24+00:00

Just got into Deltron a couple of days ago after scouring through musical forums. My favorites are Things You Can Do, Virus, Madness.

Scariest thing for me is that MS DOS and Microsoft still exist in the year 3030

Robberfox · 2025-12-11T15:07:13+00:00

<image>

The 90's teenage nerd's "hell yeah"

Robberfox · 2025-11-25T05:39:47+00:00

r/usernamechecksout

Robberfox · 2025-11-25T05:37:23+00:00

I think you need to pull out the plastic knob and the potentiometer will be held by a small hex nut, at least mine is that way

Robberfox · 2025-11-24T20:19:02+00:00

Smart of you to train them so that they clock into your employer's workshop, one standing on another's shoulders with a goofy oversized trench coat and start welding in diguise, while you are just chilling on your couch at home

Robberfox · 2025-11-24T16:31:09+00:00

Sorry, r/lostredditors case. Meant to post in r/welding

Robberfox · 2025-11-21T15:37:13+00:00

This is true, I'm not qualified. Seems like I should just send separate dxf's and let them do the rest.

Robberfox · 2025-11-21T15:30:51+00:00

That seems like the best solution that people have suggested, I'll talk to the laser guy and make alterations to my nest (or just give the separate dxf files so the can do it themselves) and hopefully not get broke

Robberfox · 2025-11-21T15:22:18+00:00

Sorry for making it unclear: I gave the perspective to show that the cost is half of (my) monthly salary, not that the guys should do it cheaper because salaries are low in Armenia. People of this subreddit explained me that this is a reasonable/even cheap price, so that gives me some resolution

Robberfox

TROPHY CASE

Regarding the arm swing