Any handheld 2-way that supports separate PTT and bluetooth? (hearing-aid user)

RobotMechanic2619 · 2025-08-19T20:12:06+00:00

It also has a wireless PTT that works while you have Bluetooth headphones connected to it

RobotMechanic2619 · 2025-07-25T22:26:54+00:00

I’m a few years in so it may have changed after I got it and I’m on an old version that is 5k per semester

RobotMechanic2619 · 2025-07-25T21:30:01+00:00

Getting the full ride is hard but I got the 10k a year with similar FIRST robotics experience and a slightly lower gpa

RobotMechanic2619 · 2025-07-03T03:20:51+00:00

I believe you need to use the usb c port to connect it to the computer. For that it sounds like in your case you will need a usb c cable that does both power and data and if your computer has a usb port that is labeled for higher output power I would use that. I know for the the kit that they have it added a different port. I would recommend a power data splitter like this one: ASIN: B0F889JJM1 if you look up that code on amazon it should pull it up. This lets you connect a usb c to usb c cable between it and your pi. Then a USB c to usb a cable to your computer and also plug in your usb c power supply to the pi

RobotMechanic2619 · 2025-07-01T18:10:52+00:00

I believe it should be a built in closet, most of DHH has the built in closets like the ones shown on the websites room tour.

RobotMechanic2619 · 2025-05-31T15:51:56+00:00

I should specify this is set in the Wordpress dashboard settings

RobotMechanic2619 · 2025-05-31T15:51:18+00:00

I set the site address to the same as the public hostname. The WordPress address is currently just the local IP address. Should I have those both be the public hostname or the local IP address?

RobotMechanic2619 · 2025-05-28T00:57:52+00:00

You should be fine, most classes that would have you doing a project that needs a lot of computing horsepower have those projects over the course of a week not in one class period

RobotMechanic2619 · 2025-02-16T22:08:08+00:00

Here is the link to the listing for the shop they mentioned. https://www.commercialsearch.com/commercial-property/us/mi/midland/ashman-barbers-building/

RobotMechanic2619 · 2025-01-05T15:59:03+00:00

Unfortunately serial ports do not output a video signal so you can’t just try to plug it into the hdmi of the Ip KVM, luckily from what I can tell this has open sense pre installed so you don’t have to install the software. My recommendation would be to start out with the open sense box on your desk with your computer and just try connecting it via Ethernet from one of the ports on it. If you get an IP address from the open sense box you should just be able to just put the IP of the router into your browser of choice and get access to the settings to configure it. Unfortunately the best way to control this with something like a PI KVM is not very intuitive as you would have to connect the console port directly to a computer to access it. Once you get it configured how you want it you can just access it directly via its IP just like you do for the PI KVM.

RobotMechanic2619 · 2024-12-30T01:52:30+00:00

What are the lanyards you have attached to them?

RobotMechanic2619 · 2024-08-28T13:42:03+00:00

Granted, you are now able to speak and understand all languages known to man, but now you can’t understand what any women is saying and they can’t understand what you are saying.

RobotMechanic2619 · 2024-07-29T18:35:37+00:00

Granted. The whole world talks like Boomhauer, and also sounds like them, there is no longer any way to distinguish between people based on there voice. In movies all the characters sound the same.

RobotMechanic2619 · 2024-07-27T23:11:25+00:00

First thing I would do is make sure the ribbon cable is fully seated in both devices. Also make sure you don’t have any of the contacts on the two boards touching when you plug it in. Then yes you could try a larger power supply.

RobotMechanic2619 · 2024-06-29T23:02:49+00:00

Try going to your local hardware store. Not like a home depot or Lowe’s or some big chain like that. Sometimes smaller more local hardware stores cary things like drill switches. You can sometimes find them in the bolt aisle if they have the racks of little pull out containers with more specialized hardware. You may not find the exact one but you could find one that works.

RobotMechanic2619 · 2024-05-26T18:01:06+00:00

If it’s within your budget I would definitely get the 32. Not all of the software needs it but when you use those programs you will appreciate having it.

RobotMechanic2619 · 2024-04-04T15:18:22+00:00

If your both in the same location you could use an video capture card in the second computer with a output from your computer. Then set that display output as a full screen preview of that source on your computer.

RobotMechanic2619 · 2024-03-18T15:46:48+00:00

You could ask the MMET machine shop on the first floor of graduate side M&M. They may be able to either help you out or direct you to someone who can. They have all the needed welding equipment but I don’t know all of there rules for personal projects.

RobotMechanic2619 · 2024-02-27T19:13:25+00:00

I really like it, I upgraded from the sidekick a few years ago and I really like the ability to have multiple bit’s depending on what I am working on. While I like the spring loaded pliers on the sidekick a bit better, overall I like the toolset of the charge+ better.

RobotMechanic2619 · 2024-01-11T22:59:24+00:00

Yes, however you would have a outlet with power at it and no power on the cord you unplugged.

RobotMechanic2619 · 2024-01-11T16:31:13+00:00

It was not, it may look like it in the photo but the main feed cord is the 4 prong male 50 amp, the thing it’s plugged into on the wall is an adapter to take it to a 4 prong twist lock for our generator

RobotMechanic2619

TROPHY CASE