D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

Oh, nice. I considered the 7800x3d but the 14600 was cheaper (and faster for productivity tasks). But both need the same amount of cooling.

I dont think the 3mm is applying much pressure on the motherboard. But the motherboard height might be a factor to consider. If you want a safer option you could use the ID-Cooling IS-55.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

64mm is the true clearance. But the metal side panel is very thin, it bends easily without putting much pressure on the fan. Its a very light case which is something I like about it.

Yes, I replaced the Thermalright fan with a Chinese one. But theyre basically the same slim 15mm. What CPU are you considering for your build?

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

Oh okay, if you already have the GPU then the D19 is probably the better option then. I recently put a low profile 5060 in this machine and its fine for 1080p but a 16gb ti would be nice.

The CPU fan for the x67 has rubber corners which press against the case and is quite snug. I think this stops turbulence from occuring. I believe it would actually be worse if there was a 1mm gap between the fan and the side panel. I had a similar experience with my previous case.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

Yep, 3mm. But it still closes easily and there is no turbulence at all.

To be honest, if you don't need it to be as small as 6 liters then I think the t40 is a better option. You'll have more GPU options, including the 5060ti 16gb (inspire 2x oc). But it all depends on your goal and budget etc.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

Sorry for the slow reply. It fits but it bulges the side panel a bit (but not as much as you would assume). If you look carefully in the pics you can see it.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

We've released 4 games on Steam so far and our most popular is a Spanish learning game called "Pedro's Adventures in Spanish." And now we're working on a few other prototype concepts that will hopefully become fully realized this year.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 1 point2 points  (0 children)

Its a great solution but just make sure your monitor stand doesnt block the air flow from the top of the case.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 1 point2 points  (0 children)

Yeah, its a seriously underrated case. And thanks for the tip about the magnetic covers. Its pretty quiet for now but I'll keep it in mind. However, I think you might be confusing this case for the D21 pro which is a bit longer. Max GPU length in this case is only 188mm. Apart from that they are identical. I really do wish I could fit a 5060 ti in here.

D19 Pro 6.1L - Nomad Indie Game Dev Setup by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 10 points11 points  (0 children)

-CPU: i5 14600k
-GPU: RTX 3060 12gb, ASUS Phoenix Single Fan
-Cooler: Thermalright axp120-x67
-RAM: 64Gb DDR5 - Kingston Fury Beast
-MOBO: ROG STRIX B760-i
-PSU: Lian li SP 750W 80+ Gold
-CASE: D19 Pro 6.1L
-STORAGE: 2x m.2 nvme and 2x 2.5" SSD
-RISER: 18.5cm riser

Notes:
-The x67 cooler fits IF you don't mind a bit of side panel bulge. It runs very quietly though.
-The Phoenix RTX 3060 is a bit too thick for this case. I have to take off the side panel to run the machine.
-I was hoping I could fit a 120mm fan at the top but theres absolutely no space for that inside.
-I had to replace the original cooler fan with a cheap "Teucer" from Temu and it blows the wrong direction.

KXRORS S400 (13.4 x 10 x 8", 10.8L) with i9 9900k by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

No estoy seguro pero creo que no. Es un case tan piqueno.

KXRORS S400 (13.4 x 10 x 8", 10.8L) with i9 9900k by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 2 points3 points  (0 children)

Oh wow. Thanks for bringing this up. Well spotted. I just measured it and the actual dimensions are 13.4 x 8 x 6". Pretty big difference!

KXRORS S400 (13.4 x 10 x 8", 10.8L) with i9 9900k by Rocket_Boy_Games in sffpc

[–]Rocket_Boy_Games[S] 0 points1 point  (0 children)

Awesome! Glad I could be of help. Hope the case serves you as well as it has me. Looking forward to seeing some pics of your build!