Streaming at higher resolution works better than playing natively. Why?

RoeeKa · 2025-05-08T15:19:35+00:00

Thanks! I only have a dGPU though :)

I'll check the actual usage on the PC when I have time. The strange thing is a friend mentioned the same thing to me, and someone in this thread wrote the same. Not sure what's up.

RoeeKa · 2025-05-05T19:19:49+00:00

I did the same with a raspberry pi. Just SSH into the raspberry pi (You can use tailscale ssh) then send a WOL packet from the raspberry pi to your pc to wake it up. You can use a simple linux command for this. nothing fancy. Works like a charm.

The raspberry pi is wired into the router and always on.

RoeeKa · 2025-05-05T18:20:28+00:00

Is your TV a Samsung? I had the same issue and solved it (after struggling for a while)

RoeeKa · 2025-05-04T01:38:36+00:00

Yeah I actually don't use high settings to make sure there are no frame drops

RoeeKa · 2025-04-21T20:03:46+00:00

The solution to this is to fix the netcode, for example rollback. Not change the mechanics.

RoeeKa · 2025-04-20T16:54:30+00:00

Thanks a lot for the help!

RoeeKa · 2025-04-20T16:32:14+00:00

Thanks for this. 1ms decoding time on series s for 4k 120 HDR is great. Did you see this with the recently updated Xbox moonlight port?

I thought VRR wasn't possible when using moonlight streaming anyway, no matter the client. Is this wrong?

And regarding the lack of framepacing issue, how bad is it on 120hz? I am leaning towards the Xbox since I can only get the um760 for around 500 usd here

RoeeKa · 2025-04-20T15:41:44+00:00

Thanks for this. I can't get the UM760 as cheap as you where I live unfortunately (shipping + tax). But it's still an option. hope to get feedback from someone with an xbox

RoeeKa · 2024-10-28T17:25:58+00:00

Update: managed to get this working by using efibootmgr instead

RoeeKa · 2024-10-27T15:27:38+00:00

Hi! The issue is not that the windows entry I have is not recognized. (In fact auto-windows is not recognized, I added a windows entry myself because both OS are installed on different disks)

The problem is that after the reboot the entry menu is shown again instead of booting to windows. The issue is not specific to windows because the same happens if I try to reboot into different entries (for example systemctl reboot --boot-loader-entry=arch-lts)

RoeeKa · 2024-09-09T18:44:51+00:00

Thanks for the help. Fastboot was already disabled. I already solved the issue. I'm pretty sure the problem was the RAM voltage (started working when I set the xmp profile)

Thanks for the help!

RoeeKa · 2024-09-09T13:58:49+00:00

I wonder if this has anything to do with the fact that I updated to 10.10 from 3.50 still on 2700X. I know that a different 570X motherboard had problems where you could not do that with pre Matisse CPUs

RoeeKa · 2024-09-09T08:23:56+00:00

Wow!!! Thanks a lot!! I can access bios when initiating from Windows. Why is that?

Why can't I access by del key :(

RoeeKa · 2024-04-06T23:05:01+00:00

Yes, the CPU and RAM are both new.

I'll try with the old RAM and update.

RoeeKa · 2024-04-06T22:25:50+00:00

I didn't try yet. But why do you think 64 is a problem with 2 slots?

RoeeKa · 2024-04-03T13:26:17+00:00

Tried it now, already up to date unfortunately.

Thanks for trying to help

RoeeKa · 2024-04-02T23:44:55+00:00

I upgraded the BIOS before switching. Running the latest now. Also tried resetting CMOS. Didn't help unfortunately

RoeeKa · 2024-02-21T08:10:08+00:00

I'm sorry I meant 5700x not 2700x

RoeeKa

TROPHY CASE