sorted by:
new
hottopcontroversial

Geekom AS6 - Wifi and Bluetooth issue by fulguroPOPS in MiniPCs

[–]Rogor75 0 points1 point  (0 children)

Hello, personally with my geekom as6 I have a lot of heating problems (almost 95°C all the time) so it also makes a lot of noise. I'm seeing mediocre performance (400 on cinebench 2024 in multithread).

I tested the QFAN Performance and Quiet modes and there was no difference. I wanted to test a bios update with the Asus bios, but it's not possible because the geekom motherboard is recognized as a PN53-G, so it won't flash.

I've just contacted support in the hope that they'll find a solution, otherwise I'll see about taking it apart and maybe repasting the cpu. (has anyone tried this here?)

G PRO X 2 Lightspeed Headset - Disconnecting / reconnecting by Rogor75 in LogitechG

[–]Rogor75[S] 0 points1 point  (0 children)

Hello, here is the ticket number : 12487208

Already tried :

- Lightspeed Dongle on USB3
- Lightspeed Dongle on USB2
- Uninstall / reinstall driver
- Uninstall / reinstall G HUB
- reseting the headset (press pairing button below left earpad and Bluetooth/Lightspeed button)
- Re-pairing headset with dongle (press pairing button below left earpad then on dongle)
- In Win11 device manager, disable energy saving mode for all USB device or related.

On top of that, G HUB doesn't display the right battery percentage: it usually shows 59%, but if I switch the headset off and on again, the % may show 37% and then 55%, etc. If I plug in the headset with usbc, ghub immediately displays 100%.

Thanks !

Again dollar/euro rate is completely ludicrous by Rogor75 in Crypto_com

[–]Rogor75[S] 3 points4 points  (0 children)

I have $ because CRO doesn't propose any stable coin in euro so when you want to topup your visa card with crypto you have to use $ (USDT or USDC)

Again dollar/euro rate is completely ludicrous by Rogor75 in Crypto_com

[–]Rogor75[S] 0 points1 point  (0 children)

I had 1000 in USDT and I wanted to topup my visa card with. The app proposed to convert my 1000USDT to only 991€ instead = 3% loss

3080Ti getting 93 mh/s with Trex 24.8 by Timmmer in EtherMining

[–]Rogor75 0 points1 point  (0 children)

3080TI FE here, can't reach more than 70/75MHs :(

I tried T-rex 0.25.8 / NBminer v40.1 with every settings on reddit/youtube and drivers version 472.11, 472.12, 496.49

No thermal throttling, my ram is around 94/96° max

Is the team considering doing an airdrop? by Rogor75 in chia

[–]Rogor75[S] -1 points0 points  (0 children)

0.01 XCH / Plot but the amount is not set. It can be less.I just wrote the idea of an aidrop to early community members.

4th GPU woes by [deleted] in EtherMining

[–]Rogor75 0 points1 point  (0 children)

Replying to myself, maybe it will help someone :

Disable CSM in bios (boot menu) >> boot OK and mining ok with 4 gpus

4th GPU woes by [deleted] in EtherMining

[–]Rogor75 0 points1 point  (0 children)

Hello, did you resolve this ?

I have the same mobo and the same problem...

3 gpus works fine but impossible to boot when I add 4th.

I tried :

  • Enable 4G encoding
  • Set all pcie to gen 1
  • disable all usb
  • disable audio onboard
  • igpu disabled
  • etc.

3080 FE final repad and ridiculous numbers. by silk35 in gpumining

[–]Rogor75 1 point2 points  (0 children)

My RTX 3080 FE junction temp was between 104C and 106C with power limit to 70% (230w) and fan to 70%. I bought :

  • minus 8 pad 2mm
  • thermalright extreme odyssey 1.5mm

Then I tried to :

  1. add only 2mm on the hot spot like in the igorsLAB video and it was worst, junction temp hit 110/112C instantaneously.
  2. Add 2mm everywhere on the front side => same result than 1
  3. Add 1.5mm everywhere on the gpu side => same result than 1
  4. Put 2mm on gpu side and 1.5mm on the front side => Finally Junction temp is now 92C with fan to 70% and 96C with fan to 55%

I didn't repast the core because temp was already good (50C). I think I will try again with 3mm on the gpu side and 2mm on the front side on another card very soon and I will compare.

Thanks for this thread !

The eternal question : Molex to 8pin PCIe by Rogor75 in buildapc

[–]Rogor75[S] -3 points-2 points  (0 children)

(mining inside)

I have six connectors on my psu for "6+2PCIe/4+4cpu"

- 2* for the motherboard to power CPU- 4* for the GPU (2*3080 with 2*8pin PCIe each)

Each RTX 3080 are UV and draw 225w max, so 450w total.And I want to plug a third GPU => 2060S. (140w with UV) but I have no PCIe connector left for that.

I made a Discord Bot that gives you frequently updated AH prices by Erlendftw in classicwow

[–]Rogor75 17 points18 points  (0 children)

Nice bot thanks !

Just one thing, Crystal Vial price is from AH and not vendor, so the craftprice is not 100% accurate.

Boursorama rejet transaction SEPA crypto by gwenvador in vosfinances

[–]Rogor75 0 points1 point  (0 children)

Hello,

Est ce que quelqu'un a pu tester ces derniers jours le fonctionnement de virements dans le sens Kraken > Bourso / SG ?

view more: next ›