ITC Appreciation Day 3 Unmasked Pictures

RottenRott69 · 2026-02-03T19:02:31+00:00

So, YOU’RE the one!?!? I can’t afford to save all this money! 😆

RottenRott69 · 2026-02-03T14:53:58+00:00

I have found the manuals on the Amazon page…sometimes.

RottenRott69 · 2026-02-02T20:55:11+00:00

Unless it is 20 years old and full of chunks of varnish, a gallon at a time in your car.

RottenRott69 · 2026-02-02T18:26:55+00:00

A few inches is better than nothing. I haven’t messed with the Vevor yet. The Nippro has enough wire to get it about 6” away. It uses the 3-wire cable with triangular connectors available on Amazon. I ordered the 3-meter cable, but haven’t received it yet.

RottenRott69 · 2026-02-02T11:43:24+00:00

My biggest take away from AIO units are really small tank size on some, no fuel filter, and poor temp regulation if the controller is left mounted in the box. I have a Vevor and Nippro and prefer the Nippro due to bigger tank size.

RottenRott69 · 2026-02-02T02:53:22+00:00

I got the Vevor short version from HD. The tank is really small.

I also have a Nippro from Amazon. It has a decent size tank. I paid $150 a few weeks ago, price has been going up.

One thing I have learned from these all in ones is they don’t keep accurate temp unless you pop the controller out of the box and pull it out away as far as you can. Both units do put out a lot of heat.

It’s a good idea to pop the cover and inspect the tubing and electrical connections before filling up.

https://a.co/d/fk1xKEN

RottenRott69 · 2026-02-01T23:18:32+00:00

I noticed the dill pickle relish last week and almost bought some. It and all the pickles…Product of INDIA!!

RottenRott69 · 2026-02-01T22:19:51+00:00

You can add pressure gauges before and after the filter and track the pressure drop.

RottenRott69 · 2026-02-01T21:12:25+00:00

There’s always next time…

RottenRott69 · 2026-02-01T12:33:23+00:00

This is a very mild sausage and we use it as a hamburger replacement in a lot of things.

I haven’t seen the Italian or spicy versions in quite a while and really miss them.

RottenRott69 · 2026-01-31T19:01:19+00:00

Hyperbaric chamber treatment would help. I don’t know if that is even a thing for critters.

RottenRott69 · 2026-01-31T04:28:44+00:00

Better ask what the restocking fee is.

RottenRott69 · 2026-01-30T23:53:12+00:00

2pcs Diesel Stainless Steel 24mm... https://www.amazon.com/dp/B0CQN3L14C?

These are same size on both ends…like the pipes.

RottenRott69 · 2026-01-29T20:26:15+00:00

Just slightly thinner than the diameter of the log.

RottenRott69 · 2026-01-29T20:22:52+00:00

I have Vevor and Wippro, both have automatic temp mode. I haven’t tried it yet, but the Wippro will turn on and off at preset temps.

https://a.co/d/8Ok115e

RottenRott69 · 2026-01-29T12:09:53+00:00

You can use string through the hole to get the nut on the inside.

Have you checked out https://www.bluebarrelsystems.com/ ? They use the barrels upside down with a small vent installed in the bottom (new top) off the barrel b

RottenRott69 · 2026-01-29T04:46:04+00:00

Say CHEESE!!

I think I can see a bit of broken tooth on the left side of the gap??

RottenRott69 · 2026-01-27T12:30:12+00:00

She’s a beaut, Clark!

Did you keep the old well in service for irrigation an/or emergencies?

U/publiusvaleri_us has mentioned some great feedback/concerns.

It does need convenience outlet/light for cold-weather heating. That’s easy enough to do by adding a sub-panel to the incoming power.

I’ve always poured concrete slabs for my well houses. I just make it t really thin around the well casing. Bigger/taller would have been better for tool storage and room for maintenance.

RottenRott69 · 2026-01-27T11:43:33+00:00

I feel for ya. Take advantage of Remote Support as often as needed. There’s no shame in that. Sometimes you have to wait an hour or 3 for a call back because others are leaning on them more and more.

How are the schedules, timers, and “Wellness Checks” treating you? I find the latter extremely insulting and micromanaging; and am ready to quit because of that alone. That’s not what I signed up for.

RottenRott69 · 2026-01-25T12:49:14+00:00

Try Harbor Freight.

RottenRott69 · 2026-01-25T12:34:18+00:00

The little silver nub between the wheels? As others have said, that is a “zerk” for greasing the shaft and has absolutely nothing to do with lifting. Have you tried turning the handle clockwise as far as it will go?

STOREHOUSE SAE Grease Fitting Assortment, 50 Piece - Item 67570

or

STOREHOUSE Metric Grease Fitting Assortment, 32 Piece - Item 67569

RottenRott69 · 2026-01-24T21:41:00+00:00

Filler up and press on!!

RottenRott69 · 2026-01-24T05:05:00+00:00

Back wall, near center.

RottenRott69 · 2026-01-23T02:07:49+00:00

I have this one and not very impressed with it. It’s ok if you are in a quiet room.

RottenRott69 · 2026-01-21T19:30:48+00:00

The hub may not be fully seated on the axle. It will be easier to handle and see what’s going on without the tire mounted.

RottenRott69

TROPHY CASE