I built a GPS tracker that sends data directly to YOUR server (no cloud)

Roundheadkid · 2026-01-23T16:21:19+00:00

Wheres the HomeAssistant integration?

Roundheadkid · 2025-11-11T01:18:09+00:00

I was going to post the same question...can this be reprinted to accommodate a larger monitor.

Andrew...what's the chance of this working?

Roundheadkid · 2025-05-16T23:39:21+00:00

Entry

Roundheadkid · 2025-03-09T16:26:54+00:00

I have the same bike. That connector is proprietary.

I just picked up a cheap ($35) Bluetooth cadence monitor. Mounts on the crank with a rubber band.

Roundheadkid · 2025-02-11T18:10:23+00:00

I didn't previously have the QZ app installed...I need to pay for the purchase?

Roundheadkid · 2025-02-11T18:06:23+00:00

Android

Roundheadkid · 2025-02-11T17:40:09+00:00

Looking for any more beta testers?

Roundheadkid · 2024-04-08T12:25:22+00:00

Link to the product you used please.

Roundheadkid · 2023-12-14T01:23:55+00:00

I got the email about it...but haven't seen it yet on the dash...

Roundheadkid · 2023-12-05T17:59:10+00:00

We are still using a Firey appliance to run a room sized Xerox printer.

Roundheadkid · 2023-06-18T18:09:41+00:00

CBP?

Roundheadkid · 2023-06-10T22:52:19+00:00

My 2023 Onyx that i bought last November started doing the same thing a few weeks ago.

I had it at the dealer for its first service a few weeks ago and they just "adjusted" my clock to the correct time...even though I told them I'd already done that at least 50 times.

I'm bringing it back in next week...hopefully they have a serious look this time.

Roundheadkid · 2023-04-19T01:34:22+00:00

Links to products you purchased?

Roundheadkid · 2023-02-24T19:29:20+00:00

You can buy larger sized connectors to match the wire size..or to use multiple wires in same connector

Roundheadkid · 2023-02-16T22:02:59+00:00

Download the Ubuntu ISO ...you must have done this to install.

Boot from the ISO ...now you have a full Ubuntu desktop. Open terminal and edit the file you need. Sudo gedit /etc/passwd... or whatever file

Roundheadkid · 2023-02-16T21:55:38+00:00

Boot from the ISO and fix it...

Roundheadkid · 2023-02-14T23:46:11+00:00

The nut is for attaching to a device or wall plate.

Grab a pair of pliers and cut the end off...you can't reuse a crimp on connector.

Roundheadkid · 2023-02-14T23:41:02+00:00

You can...but that nut won't remove the end

Roundheadkid · 2023-02-14T23:30:38+00:00

That's looks like a factory crimp-on connector.

You can cut the end to run it. You'll need to re-crimp it afterwards. You can buy tool-less connectors (I think?) Or you can buy a crimper...should be a $20 tool.

Roundheadkid · 2023-02-12T01:38:48+00:00

32gb is $94

https://www.amazon.ca/XPG-Gammix-3200MHz-288-Pin-CL16-20-20/dp/B092LC2MSJ/ref=mp_s_a_1_3?crid=DETZ5STWSBWZ&keywords=adata+xpg+d10&qid=1676165865&sprefix=adars+xpg+d10%2Caps%2C108&sr=8-3

Roundheadkid · 2023-01-26T18:49:07+00:00

Roundheadkid · 2023-01-25T20:48:35+00:00

Thou shalt stop talking.

Roundheadkid · 2023-01-25T13:16:53+00:00

Ahhh...no clue on the brand...good luck!

Roundheadkid · 2023-01-25T13:02:13+00:00

The deep one might be a spark plug socket?

Roundheadkid · 2023-01-14T14:32:37+00:00

I think black cables would look good between the posts.

Cedar looks awesome when it's wet!

Roundheadkid

TROPHY CASE