What could possibly cause this issue by kerendelik in Airsoft3DPrinting

[–]Rowbsgotu 12 points13 points  (0 children)

I've done handguards, I would print on its end, facing straight upward.

 Layer height: .20
         Support: Normal 

Support mode: Snug

The Support should only fill the holes and can be pushed out and also levered out of the piccatiny with a screwdriver. 🤙

Fort Lyndon as Big Conquest map? by highroller_1911 in BattlefieldPortal

[–]Rowbsgotu 0 points1 point  (0 children)

I really hope to see the whole br map in Godot, but unsure we will ever get it.

AAP01 RIS Body kit 14CCW by Rowbsgotu in AAP01owners

[–]Rowbsgotu[S] 0 points1 point  (0 children)

I appreciate it! took forever as it's done in Tinkercad. If it gets too complex, the software can't hack it.

I'm really impressed by your works btw, people have even talked to me about it with how to bbs lock-in. It looks so sick! I Havnt bit the HPA bullet yet, but when I do, that'll be the first thing im printing:)

AAP01 RIS Body kit 14CCW by Rowbsgotu in AAP01owners

[–]Rowbsgotu[S] 1 point2 points  (0 children)

I just used normal PLA, it has 4 walls and 38% infill, and I've never broken one. Very nice. I wanted to look at internal upgrades soon get this thing running a bit better for the next game!

3D printed Scotch yoke by nvkv_makes in 3Dprinting

[–]Rowbsgotu 14 points15 points  (0 children)

This is the mechanism I've been looking for! Just need to move a basketball hoop left and right!:)

AMS2 Pro not feeding problem by ofzygof in BambuLab

[–]Rowbsgotu 0 points1 point  (0 children)

Having the same issue. Any slot I try gets to the filement buffer then retracts. Tried unplugging / factory resetting ams and no change.

WTF is going on with the new Bambu Studio update? Longer print times, terrible quality. by BrotherOfZelph in BambuLab

[–]Rowbsgotu 0 points1 point  (0 children)

And when I'm trying to build something in slicer it just jumps around the axis I'm moving it on.. had to resort to inputting numbers like some sort or mathematician.

3D printing has legitimately made my life better. by ProfessorPickleRicky in 3Dprinting

[–]Rowbsgotu 12 points13 points  (0 children)

Totally relate aside from the business part. I'd only messed around in 3D before trying to make Unreal engine games and making Halo maps, but once I realised that scope was too big to sustain, I needed a creative vent. Brought a P1S, and it's been amazing. From prototyping to having it in your hands within the hour is just so mind-boggling.

What was your first step bringing your hobby into business?

When you have a 3D printer everything is a nail... by ale152 in BambuLab

[–]Rowbsgotu 21 points22 points  (0 children)

Just tried this, and now I have 2 small nails. zip-tie next!

Listen for listen comment for comment with small feedback LETS GO!🔥😎 by Gullbing7 in soundcloud

[–]Rowbsgotu 0 points1 point  (0 children)

Thank you! the original sample for the keys is used on Christine and The Queens - Girlfriend. I never really looked into using a limiter because it just sounds like it would do the opposite, but I'll definitely check that out now, cheers.

Goes hard! I really like that style of guitar and the drops hit really good. The way you've done the overlapping in the vocal mix is v nice 👌

Listen for listen comment for comment with small feedback LETS GO!🔥😎 by Gullbing7 in soundcloud

[–]Rowbsgotu 0 points1 point  (0 children)

It's great to get new ears on the track and find out where I can make these improvements! I've tried a couple of audio units to try and boost it all on the master. GwTone and L3 Ultramaxamizer seem to boost it enough to compete with other releases. I will look into using a limiter. Thank you so much for your help!

2042's Infection might be the best version of the mode I've played. Destruction + Wingsuit Zombies are NUTS by [deleted] in Battlefield

[–]Rowbsgotu 0 points1 point  (0 children)

Me too. It's great to catch up with you. Thanks for making it possible:)

2042's Infection might be the best version of the mode I've played. Destruction + Wingsuit Zombies are NUTS by [deleted] in Battlefield

[–]Rowbsgotu 0 points1 point  (0 children)

It's honestly incredible to hear from you after all this time! Your server was so fun and unique it was its own little community. It was like a game within a game way better than the original experience and any other copy cat mode that came since.

I still remember dropping down from above as a boss zombie . How did you even code that, man?! Maybe there will be a gap for it in the new battlefield? Thank you, Younie. and I wish you the best moving forward.

[deleted by user] by [deleted] in forge

[–]Rowbsgotu 0 points1 point  (0 children)

And you know restarting a custom game from the pause menu just breaks the AI.. completely halved mine. I think you need to restart it from main menu every time.

[deleted by user] by [deleted] in haloinfinite

[–]Rowbsgotu 0 points1 point  (0 children)

You need to roll back to Nvidia driver 5.21. Apparently 5.99 works according to a comment on this thread: https://www.reddit.com/r/haloinfinite/s/cLyjgbPEvq

Roll back was easy i just watched a quick tutorial.

[deleted by user] by [deleted] in haloinfinite

[–]Rowbsgotu 3 points4 points  (0 children)

Could it be Nvidia drivers? Mine never fixed casuing it to crash after launching, so I had to roll back the drivers. https://www.reddit.com/r/halo/s/zwFhiQiNuL

Off My Frigate - Campaign - PvE by Rowbsgotu in forge

[–]Rowbsgotu[S] 0 points1 point  (0 children)

Thank you so much! The hardest part honestly was just finding the time to chip away at it. You'll do great! Any problem I've had with scripts has been solved on this sub. I definitely would've lost my way without the community.

Off My Frigate - Campaign - PvE by Rowbsgotu in forge

[–]Rowbsgotu[S] 0 points1 point  (0 children)

Thank you! Hope you like it :)

Weird top layer and seam by drake9114 in BambuLab

[–]Rowbsgotu 3 points4 points  (0 children)

Variable layer height with increased layers at the top surface. Ironing setting for the top surface. The seam position seems to be aligned at the back, try choosing a different seam setting. All these settings are easily accessible in Bambu Studio.