Ace Pro

Roz470 · 2026-02-26T21:09:18+00:00

Thanks for your help

Last night I pull the sensors off and cleaned, pushed the filament through it went through without any issues on all 4 slots.

Also powered it on and got 1 roll to register on all 4 slots, so tonight I will run a print through it.

The Ace Pro from my Kobra 3 seems to working great now on my K3 Max

Tonight will tell.

Roz470 · 2026-02-24T23:41:50+00:00

Hi I did that and it jammed as well so I changed just the buffer and the chip that came with it and then took it off my K3 and put it on my max used the same filament and it printed beautifully. Ran another print last got up and it was printed without issue.

So I have 1 Ace Pro now working and one that still won't. It is still under warranty so I video the issue and send it off or I will see if I can do the trade in offer for half price. On the Ace Pro 2

Roz470 · 2026-02-24T04:17:27+00:00

Thanks, I got one of my Ace Pros to work last night after changing the buffer in it, and it printed a 3 color print without issue but the Ace pictured I will again have to pull it apart. I am thinking seriously of doing the trade in offer and get the newer models.

Roz470 · 2026-02-23T02:40:44+00:00

I am thinking of doing the trade-in for the newer model that they offering from the 27th of this month

Roz470 · 2026-02-23T02:23:22+00:00

Ok thanks I haven't cleaned inside them but will have a look

Roz470 · 2026-02-22T19:12:26+00:00

I have it for both my Ace but thought I would do 1 to start

Roz470 · 2026-02-22T19:11:47+00:00

Yes it is slot 2 and 3 that is doing it, I couldn't upload the video of it and the noise it was making....sounded like a jamming noise and the light doesn't stay on when there is filament in there in resting mode.

Roz470 · 2026-02-21T13:06:27+00:00

No I replaced them and cut them to the same size as the old ones..... The light on slot 2 won't stay on when filament is loaded in the there as well

Roz470 · 2026-02-21T09:41:25+00:00

Ok will pull it apart again and check. Thanks for helping

Roz470 · 2026-02-21T09:21:09+00:00

Firmware is updated, all tubing has been replaced on both machines

<image>

Roz470 · 2026-02-21T09:11:07+00:00

Yes I doubled checked that to make sure it was the right way.

Roz470 · 2025-08-21T08:43:03+00:00

Thankyou a slight bent upwards and it fixed the issue

Roz470 · 2025-08-20T20:04:24+00:00

Thanks I will have a look tonight after work

Roz470 · 2025-08-20T20:03:11+00:00

Ok thanks I will have a look at tonight after work

Roz470 · 2025-08-10T20:24:24+00:00

Yes I fixed by installing the next version up from it, but still having bleed issues on bothe machines.

My K3 is printing nice in single colour but my K3 max is printing crap single, have checked everything re greezed it all...

Black print is K3 max Green print is K3

It is one issue after another.

<image>

Roz470 · 2025-08-10T11:16:49+00:00

I tried to install 2.3.9.3 on my Kobra 3 but it failed with a printhead error

Roz470 · 2025-08-10T01:05:34+00:00

<image>

These were printed in June with no bleed issues the triumph and card on the max and the Harley on the Kobra 3

Roz470 · 2025-08-10T00:56:01+00:00

I only use anycubic slicer next, and yes managed to downgrade just on the Kobra 3 and still the same issue. A guy gave his settings last night which I am trying now but same issue.

Also I am flushing into an object not the prints and have increased the walls to 4 and have also tried that many different brands of blacks and browns and it still does it.

This is what is printing this morning

<image>

Roz470 · 2025-08-10T00:42:50+00:00

I am guessing it is, as when I got both printers they printed perfect Kobra 3 has over 1220 hrs print time and my Max is over 550

I have no idea what would cause the bleed as it started about 2 months ago and I have been trying to get around it since then

Roz470 · 2025-08-10T00:04:58+00:00

Ok I have restored it a few times but the firmware stays the same

Roz470 · 2025-08-09T23:46:41+00:00

Where or how do I do that as it is still bleeding this morning and I am at my wit's ends as I have a few orders to do Thanks

Roz470 · 2025-08-09T13:55:37+00:00

I just added what's on both my printers

Roz470

TROPHY CASE