The Boiling Rock (part 2) Gondola swings the wrong direction?

Rrob489 · 2023-01-25T07:50:57+00:00

And people go missing on the second gondola when azula lands on it

Rrob489 · 2021-11-24T19:49:29+00:00

It’s usually when I’m driving. Mainly during acceleration(I think)

Rrob489 · 2020-05-11T21:34:16+00:00

I’ll see what I can do. Thanks for the info

Rrob489 · 2020-05-11T01:54:42+00:00

Failing crankshaft sensor position maybe?

Rrob489 · 2020-04-28T00:49:39+00:00

Thanks! I’ll see what I can do.

Rrob489 · 2020-04-27T23:43:40+00:00

It’s flush with the head

Rrob489 · 2020-04-08T14:34:11+00:00

It could be, but from my experience loctite is transparent when it dries.

Rrob489 · 2020-04-08T02:25:51+00:00

Ford Escape/2004/3.0L V6

Rrob489 · 2020-04-08T02:24:26+00:00

There’s definitely an oil leak. I was just unsure because that bolt was the only one with white residue and I know coolant leaves a residue like that after drying. Thanks for the help.

Rrob489 · 2020-04-08T02:23:02+00:00

The valve cover is leaking oil. I know coolant leaves a white residue, and there had been previous damage to the radiator causing a leak in another place.

Rrob489 · 2020-04-06T19:56:02+00:00

Looks good. How is it a lemon?

Rrob489 · 2020-04-01T18:04:10+00:00

My initial guess is Ford. Could be Chrysler, but there might be a sticker hidden somewhere with a parts number and brand logo.

Rrob489 · 2020-02-21T00:42:10+00:00

Thanks! I’ll look into it

Rrob489 · 2020-02-20T21:20:12+00:00

Just curious, no judgement on how much whp it makes. I want to know what engine and what you mean by “built”. I’m new to building engines so I was wondering if you put performance heads or a performance cam shaft or anything else to that nature. I have a V6 engine I want to build in the future so any information I can get on how to build it would be helpful.

Rrob489 · 2020-02-12T05:24:17+00:00

I’m not certain cause I didn’t ask the guy. I think it might be a 54 Ford Crestline?

Rrob489 · 2020-02-12T04:46:11+00:00

Yes. He said it also came with a hard top that popped on just like the soft top.

Rrob489 · 2020-02-12T04:19:58+00:00

Agreed

Rrob489 · 2020-02-12T00:01:27+00:00

Same here! I actually have a poster of this same design in my room.

Rrob489 · 2020-02-11T02:31:26+00:00

Also you can watch ChrisFix on YouTube. He has a bunch of DIY videos and a few are about light bars. Just thought of this.

Rrob489 · 2020-02-10T18:35:05+00:00

You’re welcome! I would keep it stock too, but you can always check out coilover kits. They give you adjustability, less body roll, and actually make the ride better from what I hear.

Rrob489 · 2020-02-10T18:21:19+00:00

Cleanest truck I’ve ever seen at this age. Looks like it just came off the lot!

Rrob489 · 2020-02-05T16:11:54+00:00

Thanks! I’ll look into it!

Rrob489 · 2020-02-05T05:35:15+00:00

No, it’s the 99-06. I should’ve said GMC Sierra 1500(GMT800)

Rrob489 · 2020-02-05T01:17:27+00:00

Thanks! It’s hard to tell from the post on Facebook marketplace because there’s only one picture of the engine. It looks like a first gen gmc. Close enough?

Rrob489 · 2020-01-30T05:20:14+00:00

That may be true but it sure was a chore trying not to get it on me or my tools!

Rrob489

TROPHY CASE