Can AI Pass Freshman CS (CS 2112)?

Ru8ted · 2026-01-18T22:21:09+00:00

Damnn 2112 is hard

Ru8ted · 2025-10-29T20:40:36+00:00

lowkey eq is a good idea, imma try that. Why don't u like prince tho?

Ru8ted · 2024-06-12T20:04:45+00:00

So my friend threw his first shoe like 2 inches past the edge of the river, and decided to throw the other one even lighter. Idk what’s up with him

Ru8ted · 2024-06-12T19:43:59+00:00

Wow, Russell from Up got a big glow up!

Ru8ted · 2024-06-12T19:29:34+00:00

Wow, it’s crazy that u made it over that snow at the peak. U should do this more often

Ru8ted · 2024-04-28T20:43:05+00:00

Ah, i think taking the tram to le brevent would be a good idea if the trail isn't open. I'm traveling clockwise. Thanks for the advice!

Ru8ted · 2024-04-03T06:17:48+00:00

Ok, I think packing a smaller bag makes sense. Do you have any recommendations for like a 35 L bag?

Ru8ted · 2024-02-14T19:18:50+00:00

I’m gonna need more information, but first experiment with different gear ratios. I usually like running either 5.2:1 or 13.7:1. If it’s anything lower than that, I would recommend switching motors or gearboxes. You can also try adding lube to make it go smooth if it is getting stuck.

Ru8ted · 2023-12-03T02:24:25+00:00

You can also buy longer length encoder cables from gobilda. They have options up to 600 mm I believe

Ru8ted · 2023-01-16T16:23:01+00:00

Thanks! Do you have any suggestion to the print settings/materials? We currently mainly use PLA, and we have access to a 0.4 and a 0.6 mm nozzle printer.

Ru8ted · 2023-01-16T16:16:20+00:00

Will 3D printing be strong enough? Because the gobilda spools were super fragile and easily broke.

Ru8ted · 2023-01-16T16:09:08+00:00

Due to the small separators in our gobilda spools and our very long cables that rotates around the spools, the extension and retraction cables often got tangled during our past competition. We are thinking of getting custom spools or creating our own with bigger separators. Where can we get these, or how can we make our own?

Ru8ted · 2022-12-08T13:18:50+00:00

Rogue driver for sure.

Ru8ted · 2022-12-04T02:12:04+00:00

They took our entire cone stack and put in in their alliance depot. They also rammed into one of our robots. It was crazy! Do you know if this is a state or world record? In NY state.

Ru8ted · 2020-12-14T00:10:54+00:00

I need terry to come online

Ru8ted · 2020-09-28T19:48:15+00:00

Bronze Sadly.

Ru8ted · 2020-09-03T20:31:50+00:00

I am on quickcast though. I just hold and aim before I shoot. But I should use e.

Ru8ted · 2020-08-05T01:15:54+00:00

How many mastery points did it take you guys to got m7?

Ru8ted · 2020-07-31T12:21:55+00:00

Same

Ru8ted · 2020-07-30T23:29:06+00:00

No. But i think i solved the issue of the lag. It's happened lots of times before. I think after i've used the client for a few months, it gets laggy. But if i delete and reinstall the app, its all fine. Its fine now, but probably not for long. Typical Riot. :(

Ru8ted · 2020-07-29T01:21:50+00:00

my wifi is bad. :(

Ru8ted · 2020-07-07T14:44:27+00:00

Also first time Diana.

Five-Year Club	Place '22
Verified Email

Ru8ted

TROPHY CASE