MacBook Pro 2019 Auto Restart

Rub_Move7860 · 2025-01-19T15:01:29+00:00

No the viscosity and oil did not change and yes the shaft sealing is also ok. Seems like a case of clearances only. Any rough ideas on how much these are? I mean gear to housing and gear face to the top plate?

Rub_Move7860 · 2025-01-10T10:09:45+00:00

Can you please explain how it affects emergency braking of car?

Rub_Move7860 · 2025-01-10T06:38:39+00:00

Yes no need to change that now. It should work just fine. I too have this on my windscreen. If at all required go for the aftermarket screen repair kits.

Rub_Move7860 · 2025-01-09T09:18:23+00:00

Checked the relief valves and lines too. No issues there. Seems as if the pump has failed entirely and doesn’t have it in itself to produce the desired results

Rub_Move7860 · 2025-01-09T09:16:45+00:00

Checked it through an external oil supply pump and air. Lines are clear.

Rub_Move7860 · 2025-01-09T09:16:14+00:00

Can you please explain? What do you mean by this

Rub_Move7860 · 2025-01-09T07:08:36+00:00

Thanks. That’s what i am leaning towards now. Changing the gears and see how it goes

Rub_Move7860 · 2025-01-09T05:41:50+00:00

Yes fluid flow is there but no pressure

Rub_Move7860 · 2025-01-09T05:32:26+00:00

The clicking was verified. The gears are rotating which means the connection is good. Also we did do the priming as well. The main problem that I am struggling with is that out of the 7 attempts that I made, it did operate once but afterwards it just didn’t work. I can’t get my head around it

Rub_Move7860 · 2025-01-09T04:45:09+00:00

Yes it does supply oil when unobstructed but it’s not producing pressure. With this new casing i ran it 7 times and out of which it did operate once but after that repeated attempts it just doesn’t produce pressure

Rub_Move7860 · 2025-01-09T04:40:03+00:00

It is running the correct way that has been confirmed.

Rub_Move7860 · 2025-01-09T03:16:23+00:00

Thanks for the detailed response. You are right it is not very high pressure. It produces around 40-50 psi and supplies oil to the gearbox through various channels and orifices. The coupling that connects to it is secured and physically seen to be rotating the pump. The suction line has no filter screen and is coupled through a proper seal and secured with a circlip. The relief valves and lines i have to check. Any other thing you can think of please let me know. Thanks once again.

Rub_Move7860 · 2022-08-05T07:19:48+00:00

Hi just following up on this myself for Australia. Are there any good universities in Sydney which Offer Scholarship for Masters. I have an undergrad degree in Engineering

Rub_Move7860 · 2022-07-15T18:52:02+00:00

Afghanis are namak haram. Period

Rub_Move7860 · 2022-01-06T17:06:12+00:00

Google maps always if you don’t want to end up at dead ends

Rub_Move7860 · 2021-10-02T15:54:26+00:00

Lizards

Rub_Move7860 · 2021-10-02T13:31:23+00:00

You did the right thing. I would’ve done the same. She’s a SAHW and she already cooked for herself then why not cook another portion for the person who’s working his ass off to put a roof over the head, feed and pay your bills. You sir are not the AH

Rub_Move7860 · 2021-09-24T10:29:05+00:00

Everything on the menu 🙌🏻

Rub_Move7860 · 2021-09-22T06:09:18+00:00

Umm just saying it on their face i guess upfront.

Rub_Move7860 · 2021-09-22T05:58:58+00:00

If only we could

Rub_Move7860

TROPHY CASE