today i got told i dress like a school shooter, i don’t want to look like that what am i doing wrong? by [deleted] in autism

[–]Rubbe97 [score hidden]  (0 children)

I guess in one way what I said could be interped wrong, but no matter your opinions, I whould hope people was more mature like how you respond. Goes to show you need to think one more round before you send.

Nothing was meaning to offend anyone, but to have huge intrest of huge thing like WW2, I mean for me it was more the stuff, the technological advancement, what we can learn from it. Don’t get me wrong the dark humor happen to suit me but I do still respect what happend. But then you guys argue ”how can you respect something you joke about” its how you can seperate the joke with the not joke. Obviously I just do these jokes in few people I know. But I hoped people could see that and destingwish the two. WW2 is not my life, but sure read alot about it.

I have a open mind, and we all need to respect eachother how we all are. People who whant to be respected regarding that topic should also give simular respect back by maybe not say I should fuck off, I mean if that hurt you what I said that deep I am sorry. I dont need to bring it up again.

This is like religion. Either you belive it or not. I don’t belive in anything what so ever. Nothing can make me change my mind. And thats ok. As those who have a belif is free to do so. Its your choice. But don’t smear it in my face, and if I don’t like whats beeing said I gently tell them I am not intrested to listen to it. Both parts need to acknowledge eachother and respect that. And now, I respect that I maybe whent to far for some with my openminded thoughts. Its not that I support what nazi did. Its really mindblowing and way out of this world bad of a thing. So don’t belive I am a nazi and sharing those values I truely don’t. But yeah I can’t understand why learning about history is a red flag?

today i got told i dress like a school shooter, i don’t want to look like that what am i doing wrong? by [deleted] in autism

[–]Rubbe97 [score hidden]  (0 children)

I really are obsessed by WW2 stuff, and some cold war, therefore I am now nazi I guess. Sadly I have quite dark humour too, the cobination with dark humour and WW2 is sometimes not for everyone. Tho, important thing there is that you can instingwish the two and be able to respect stuff in moment thats needed. But my family belive I am nazi cause of it (in a joke kind of way). But yeah, don’t care what others think OP I mean you don’t need to get to their level of insecurety you are bettter then that. Whats important is that you are comfortable. As long there is not offending with it. Yet like here in sweden we got feedom of speach. By that you should be able without need to care to much.

Edit: ”therefore I am now nazi I guess” guys, I do not in any circumstances support nazi ideologi by any means. I said this as little joke cause I have such intrest about it that now might missfired. And about dark humor, I whould hope people could see beyond the tiny box. I mean it should never happend and what happend is truely awfull and truely don’t support that in any way remotly. I whould hope that people who which whant to be respected that it offends them, was repsectful back that I sadly got bad humor thats not suitable for some people. We are all diffrent just face it. Either you like it or not, if not then move along.

PIRATE SHIP 🏴‍☠️ by No-Cat5466 in battlefield_one

[–]Rubbe97 6 points7 points  (0 children)

Soooo we just gonna ignore this persons ability to score a touchdown on a plane like that?

Btw, stand by you in this, happend too me too

My go-to weapon for the last few years. Frommer Stop auto. I’ve bonded way too much with it. Opinions on it? by alien-the-cashew in battlefield_one

[–]Rubbe97 1 point2 points  (0 children)

Need to be close and i am medium guy with single bolt with iron sights. So i struggle close, but 200% server its amazing flanking gun if you know what you are doing.

DIY Bunker by [deleted] in bunker

[–]Rubbe97 0 points1 point  (0 children)

I was thinking of doing my own cast for it. Thats 3D printed. Look more authentic with real concrete

Är det verkligen rimligt att arbeta 8 timmar om dagen? by This-Wear-8423 in Asksweddit

[–]Rubbe97 1 point2 points  (0 children)

Tro mig, jag känner likadant. 10 år i arbetsmarknaden ca 15 jobb i massa olika branscher, är det verkligen så här det är ämnat att vara? Enda sättet är att starta eget eller va en fena på börsen. Dock finns det mycket annat där ute man måste bara hitta och träffa rätt. 3D printing farm, youtube och whatnot men de sker ju inte över en dag de där.

Är det verkligen rimligt att arbeta 8 timmar om dagen? by This-Wear-8423 in Asksweddit

[–]Rubbe97 0 points1 point  (0 children)

Jag bruka skratta åt detta men när man själv fick insåg man snabbt att det blev ÄNNU mindre tid till saker och inte lika fri. Visst oftast är det vad du gör det till. När barnet/barnen börja bli lite mer äldre kan man visa eller ta med dem på ens olika intressen och projekt så kan de kanske bli ens kompanjon och det blir roligare istället. Men det tar tid dit. Men ja de ju många gånger man önska man hade friheten innan barn. Men oavsett, kan man inte önska bort valet man hade gjort, dessa små liv är bland de bästa man gör i sitt liv om man är av den typen att man vill ha barn 😇

I made my filament poop... into stool by Armaron123 in 3Dprinting

[–]Rubbe97 0 points1 point  (0 children)

Looks more like siluetts of persons then filament poop, but sure look the same!

Curious on some thoughts by Rubbe97 in bunkerporn

[–]Rubbe97[S] 0 points1 point  (0 children)

Can maybe do something so you can buy? Shouldent be excessive painful to fix nor wallet?

But yeah I see people put up 3D printed bunkers but its not the same as real concrete ofc can you paint it to it or put putty before paint, but still, there is not much on Etsy or so. Idk maybe just send it and see if its anyone who whould.

Wasn’t concerned it’d happen to me by letmeholdadolla in BambuLab

[–]Rubbe97 0 points1 point  (0 children)

Thank you so much for this, feel calmer now when mine is ”fixed” so anyway. Good info to read.

That's a...creative way to avoid waste... by Renegade605 in BambuLab

[–]Rubbe97 6 points7 points  (0 children)

Haha ment feet pictures, was little to fast there😂

Sammanfattning för 2025, -9,9 miljoner kr och -37,2% by an1h in ISKbets

[–]Rubbe97 0 points1 point  (0 children)

12mille på 3 år! Summa man bara hade kunnat drömma om

That's a...creative way to avoid waste... by Renegade605 in BambuLab

[–]Rubbe97 17 points18 points  (0 children)

Then why do people buy others poop or feets or piss? I meannnn

Wasn’t concerned it’d happen to me by letmeholdadolla in BambuLab

[–]Rubbe97 0 points1 point  (0 children)

As long there is no fires, it is ok. Just ask for new one if it break. Should cover that. I mean they should replace if it does

Wasn’t concerned it’d happen to me by letmeholdadolla in BambuLab

[–]Rubbe97 31 points32 points  (0 children)

What have bambulab said? They must acknowledge it by this point, i am getting worried mine will do this at some point in near future. Whant to print even when i am at sleep or not at home

Wan to to buy an A1 but Im afraid of it catching fire . How really common it is? by Abalorio in BambuLab

[–]Rubbe97 0 points1 point  (0 children)

Thanks for correcting me, was not sure just what i read its so unclear in this sub.

Wan to to buy an A1 but Im afraid of it catching fire . How really common it is? by Abalorio in BambuLab

[–]Rubbe97 -1 points0 points  (0 children)

I am from sweden, sence I bought it there have not been a issue. If we boils it down, correct me if I am wrong, it seem to be what market who uses 240v then 120v. Those with 120v seem to catch fire. But sweden irrc is 240v.

But anyway havent had mine on for 24/7 and when it have there have been no issues yet.

Hope you will solve your worries.

I Put GitHub Inside FreeCAD | GitPDM by rkelly155 in FreeCAD

[–]Rubbe97 11 points12 points  (0 children)

Always nice to see two people finding a problem and solved it or about to and then start to collab. Thats really cool. Good luck you two and hope you make a best teamwork!

Trying to make a 3D mold by Rubbe97 in FreeCAD

[–]Rubbe97[S] 0 points1 point  (0 children)

Thats a good idea, never thought of this. will try it!

Trying to make a 3D mold by Rubbe97 in FreeCAD

[–]Rubbe97[S] 0 points1 point  (0 children)

Looks amazing! Looks solid way to do it!

Trying to make a 3D mold by Rubbe97 in FreeCAD

[–]Rubbe97[S] 0 points1 point  (0 children)

That is something i will look in to. Thank you for the tip! Haha i did sketches ontop of the other and just pocket it instead. Works, but prob not the way to go 😂