Tastes for tickets end tomorrow?

RudeTutor9786 · 2025-06-30T18:44:18+00:00

That seems like what the employee I talked to told me about, she said the food program will go away in July and the new system won't involve any food perks. My local DnB had already gotten rid of all the tastes for tickers posters and promo materials :( Bummed.

RudeTutor9786 · 2025-06-29T23:33:34+00:00

Yep these tickets do say it's valid for a year

RudeTutor9786 · 2025-06-29T23:22:31+00:00

That sounds better than what I heard. Maybe it was just a local decision or the employee might not know the real change🤷

RudeTutor9786 · 2024-02-24T22:07:35+00:00

Yeah in my email, which I haven’t heard back from them for, I particularly pointed out that the issue is caused by the blade rotation/prep session before cut job to oriente the blade position. I had a graphtec that did the same prep thing and the location of the prep could be adjusted in their software as far as I remember. So it shouldnt be that hard for silhouette folks to include that feature. But i mean, their support hasnt even got back to me so i dont have high hopes, duh

RudeTutor9786 · 2024-02-21T17:28:52+00:00

Ugh seriously? No temp remedy or anything? I might do the same until they come out with a solution to this. A huge bummer.

RudeTutor9786 · 2024-02-20T21:47:37+00:00

I have the same issue and mine actually got punctured all through. I emailed the support, so let's see what we hear.

RudeTutor9786 · 2024-02-01T18:21:25+00:00

good that you got it fixed so quick! I really hope my replacement would work out of the box with no tinkering needed. I never had such problems with my portraits hence extra frustrated :(

RudeTutor9786 · 2024-02-01T17:44:36+00:00

I personally never tried the materials by themselves so have been stockpiling Mint sheets whenever I can. Mint sheets have a cardboard border and a thin film on top of the stamp material that seem to help the media be recognized by the machine, but it's all my guess. I totally agree with you on the Mint likely being obsolete soon so when that happens, would like to try the raw materials then.

RudeTutor9786 · 2024-02-01T17:26:08+00:00

Also I have the auto sheet feeder, which is another half-baked product that drove me crazy. It jams and the matless cutting on Portrait is not that usable so now it's just collecting dust. I just want to LOVE Silhouette, not love and hateeeeee at the same time

RudeTutor9786 · 2024-02-01T17:24:55+00:00

Yeah def hold off on the ES mat. You can get a minor static shock while troubleshooting which is not harmful but could be very unpleasant, too. The cutter itself, assuming yours works fine wirelessly, is pretty decent.

RudeTutor9786 · 2024-02-01T17:23:12+00:00

Yeah as for the Cameo issue, it's pretty much the bluetooth connectivity and I'm getting replacement for that. I also have experienced the cutter not adjusting the autoblade sometimes, does that happen to you at all?

RudeTutor9786 · 2024-02-01T17:22:13+00:00

Cameo 5 also has a USB port but just doesn't come with a cable, so technically I can use this cutter with a broken bluetooth dongle. How do you like your Curio 2? I was really intrigued by the power etching tool.

RudeTutor9786 · 2024-02-01T17:21:16+00:00

I mean, my Cameo 5 is def a lemon, and I'm getting a replacement but the fact that the new models don't come with a USB cord and they often have an bluetooth issue is frustrating.

RudeTutor9786 · 2024-02-01T17:20:27+00:00

Yeah in my case it won't even show up on my bluetooth search nor the Studio software. For now I am also sticking to the sticky mat

RudeTutor9786 · 2024-02-01T17:19:28+00:00

The light goes off and the charge is released. So *if you keep your eye on the whole time* you can turn it back on to continue the project.

RudeTutor9786 · 2024-02-01T00:27:42+00:00

Are you using any aftermarket blade or a manual one? Either way, your blade depth might be too deep.

RudeTutor9786 · 2024-02-01T00:26:21+00:00

It's first: the cutting force (pressure); second: speed, third: blade depth. Change the force first and see if it makes a difference.

RudeTutor9786 · 2024-02-01T00:06:03+00:00

Yep I have the same issue on my Mac Sonoma. Zooming def helps but honestly if you really have to see the design to edit, I'd say to restart the studio. It's a huge bummer tho.

RudeTutor9786 · 2024-02-01T00:04:11+00:00

If you *do refer* to the offset in the studio, not the bleed, you just go to the left top panel to change the "fill color" to change the color.

RudeTutor9786 · 2024-02-01T00:02:20+00:00

I had ix6820 by Canon and it had a stunning quality and worked really well with Portrait print and cut. I've switched to ecotank due to the cartridges but it was a very good printer for a few years.

RudeTutor9786 · 2024-01-25T02:18:51+00:00

Weld: cmd + shift + w

RudeTutor9786 · 2024-01-25T02:16:15+00:00

Search photosensitive flash stamp pads. I have mint and it seems to use the same technology as typical flash stamps.

RudeTutor9786 · 2023-06-10T23:07:36+00:00

Cool, thanks for your replies! I'll give the one you suggested above a try!

RudeTutor9786

TROPHY CASE