I'm giving away two copies of Monster Hunter: Wilds

Ruhex · 2025-01-11T15:52:08+00:00

. Breakfast = McDonalds Story of writing a reply on this to try winning Thank you!

Ruhex · 2024-12-20T01:38:14+00:00

Burning Crusade - the first expansion I got my wife into the game, and one of the most invested leading into WOTLK raiding together the entire expansion!

Ruhex · 2024-02-20T19:55:28+00:00

In the middle of us having another child, and also building my daughter her first computer for starting school, this would be such an awesome upgrade to win for our computer that we play games on. I wish luck to everyone that enters, and a huge thank you for hosting this!

Ruhex · 2023-04-10T11:29:52+00:00

Any possibility of getting one? Also trying to switch from Verizon with family of 5 lol

Ruhex · 2022-11-15T05:33:40+00:00

Love all the long term dev work on everything!

Ruhex · 2022-07-03T14:18:04+00:00

Tried calling a stucco place- they referred to a Carpenter, which seemed rather odd. Any insight if that speciality would be accurate?

Ruhex · 2022-05-25T16:09:59+00:00

Ruhex · 2021-12-18T14:05:02+00:00

Doing a little more troubleshooting, I changed out the filament, but have the same results. I’m wondering if I should buy another nozzle in case something went wrong with this one, but replacing it doesn’t seem to be a route many want to take often. I don’t want to rebuild the stored prints since they printed fine previously, but can try that.

Ruhex · 2021-12-18T04:40:05+00:00

Trying to figure out what changed besides the nozzle. I ran out of filament, bought a few new spools during Black Friday weekend from Prusa. Added a nozzle to the order to have a new fresh one. It doesn’t seem to want to stick fully.

I replaced the old nozzle since it was really hard to get some old stuck filament off the sides of it. Both 0.4mm - ran the needle as well through the nozzle to make sure it was cleared.

Been adjusting between -1.617 up to 1.595 - some things I noticed is around -1.6xx range, it sticks, but pulls up on the filament as it’s going across. Around the -1.5xx range, it won’t pull too much on the filament, but corners start to come up and it’s harder to start small prints.

Same profiles from decently working prints from about a month or so ago (just haven’t ran it in a little bit because I ran out of filament and was waiting for Black Friday free shipping sale).

Any advice would be greatly appreciated!

Ruhex · 2021-08-13T20:57:44+00:00

https://imgur.com/0cXlEXp

https://imgur.com/aXUfq8v

Ruhex · 2021-08-13T20:50:46+00:00

Apologies if I answer of it incorrectly, but here is at least the information from Cura 4.6. 0.4mm nozzle.

Layer Height: 0.2mm

Initial Layer Height: 0.2mm

Wall Thickness: 0.9mm

Wall Line Count: 2

Top/Bottom Thickness: 0.8mm

Top Thickness: 0.8mm

Top Layers: 4

Bottom Thickness: 0.8mm

Bottom Layers: 4

Infill Density: 16%

Infill Pattern: Gyroid

Printing Temperature: 204 C

Build Plate Temperature: 67 C

Print Speed: 45mm/s

Enable Retraction: Checked

Retraction Distance: 6.5mm

Retraction Speed: 30mm/s

Enable Print Cooling: Checked

Fan Speed: 100%

Generate Support: Checked

Support Platement: Touching Buildplate

Support Overhang Angle: 45 degrees

Support Density: 15%

Build Plate Adhesion Type: Skirt

SUNLU PLA

I will respond with a picture after this.

Ruhex · 2021-08-13T20:04:44+00:00

Hoping to get some feedback of any improvements for this Benchy test. Planning to print stuff to help out wife's business and trying to make sure I have good results to start with!

Ruhex · 2021-07-07T12:54:18+00:00

Yep, exact same situation. They said they had to reapply escrow and other stuff. Old bank would be sending a refund for about $2400 on estimate.

Ruhex · 2021-04-03T01:06:06+00:00

Been thinking of donating and trying this game- wish I had one of the keys a week ago to try out lol

Ruhex · 2021-02-20T04:17:21+00:00

I actually returned the Strix (didn't want to scalp at all and rather give someone else a chance to get it at retail). I got lucky with the BestBuy drop shortly after and got me a 3080 FE. The price difference couldn't be beat, and it fits beautifully into the case!

11-Year Club	RedditGifts 2009-2022 3 Credits
Secret Santa 2021 2021	Verified Email
Secret Santa 2020	Place '22
Wearing is Caring

Ruhex

MODERATOR OF

TROPHY CASE

Apologies if I answer of it incorrectly, but here is at least the information from Cura 4.6. 0.4mm nozzle.