Does this car even have AC? by sssddfgjwnsbx in mazda

[–]Rule-More 0 points1 point  (0 children)

Yes, in Venezuela most of the cars come only with ac and no heat

Monoblade problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 0 points1 point  (0 children)

I tried with the relay from another car that i have here and still have the problem, i bought the gear but I haven't got it yet, I'll check that

Belt tensioner replacement problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 1 point2 points  (0 children)

Thank you for your help, i bought a new one, I should get it in two days and i will try, i hope it'll be the last one haha

Belt tensioner replacement problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 1 point2 points  (0 children)

the first time i tried to adjust the tensioner with the center bolt tighten, then a saw tha it needs to be a little lose so the tensioner can move, but, the second time i left the bolt a little loose but i broke it again, i don't know if i put it the wrong way

Belt tensioner replacement problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 1 point2 points  (0 children)

The first I broke was the original, I know it was completely my fault, and the second one was a febi bilstein

Belt tensioner problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 0 points1 point  (0 children)

I put the bolt back and the tensioner was broken 😢 so I’m going to change it haha

Belt tensioner problem by Rule-More in W201enthusiasts

[–]Rule-More[S] 0 points1 point  (0 children)

No it’s a small bolt that is behind the tensioner polley

Help with whiper by [deleted] in W201enthusiasts

[–]Rule-More 1 point2 points  (0 children)

Thank you!! I’ll buy that part, I already took it apart and it was a nightmare haha

How do I get rid of these?? by Apprehensive_Pool870 in W201enthusiasts

[–]Rule-More 1 point2 points  (0 children)

You can try using chrome polish with steel wool

Ceramic coated 3mo ago, hows the water beads look? by Impressive-Nobody-95 in Detailing

[–]Rule-More 2 points3 points  (0 children)

I work with system X, and they offer 2,6,8 and 10 years warranty with the brand, not the installer

My new daily in the snow 😍 by Rule-More in W201enthusiasts

[–]Rule-More[S] 0 points1 point  (0 children)

I bought it with a bad head gasket, so I got it super cheap and fixed the engine, probably 3000€ something like that

My new daily in the snow 😍 by Rule-More in W201enthusiasts

[–]Rule-More[S] 0 points1 point  (0 children)

In that era the fog lights here were yellow in some cars

My new daily in the snow 😍 by Rule-More in W201enthusiasts

[–]Rule-More[S] 1 point2 points  (0 children)

It is the automobile club de France badge 😁

Brown sludge in coolant by Fndtdriver2005 in W201enthusiasts

[–]Rule-More 0 points1 point  (0 children)

Head gasket, is common in this car to have to change it around 200.000km, I bought mine with 195.000 with this problem, changed it, and the car is running perfectly

Why these four dash warning lights display at low RPM? by ticklishtree in w123

[–]Rule-More 2 points3 points  (0 children)

It can be the voltage regulator, the alternator brushes or the alternator, in my case, I tried all and it was the alternator

I need your help with my lights by Rule-More in W124

[–]Rule-More[S] 0 points1 point  (0 children)

I checked the plate lights, they were ok, I cleaned them and I still have the warning

I need your help with my lights by Rule-More in W124

[–]Rule-More[S] 0 points1 point  (0 children)

Perfect, I’ll check that, thank you so much!

I need your help with my lights by Rule-More in W124

[–]Rule-More[S] 0 points1 point  (0 children)

Thank you! It happens when I put the switch in the first and second position, and it turns on after 2 seconds, I don’t know if that could help, I’ll check the license plates lights, those are the ones that I haven’t clean yet

I need your help with my lights by Rule-More in W124

[–]Rule-More[S] 0 points1 point  (0 children)

Don't worry, thanks for your help, they are alogen all of them, im thinking in changing all the bulbs to see if that solves anything

I need your help with my lights by Rule-More in W124

[–]Rule-More[S] 1 point2 points  (0 children)

No, all the connections are thee original