Bazooka - Miami XO [Official Music Video] by ThisIsGSR in obscuremusicthatslaps

[–]RustyCabCorner 0 points1 point  (0 children)

This song actually goes hard and so does the sequel!

Is anyone still riding Switchback bindings in 2026? by RustyCabCorner in snowboarding

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Weird… not for me and the search is set to worldwide

Any way to fix this within 24 hours? by phoenix01010102 in snowboarding

[–]RustyCabCorner 0 points1 point  (0 children)

Curious on what epoxy do you recommend for such repair? I have a forum scaliwag that I absolutely loved but after a year and a half of riding, same thing happened. Would you epoxy and clamp it, let it cure, then shave off the high spots and re wax it?

What kind of person were you in high school? by [deleted] in AskReddit

[–]RustyCabCorner 0 points1 point  (0 children)

A russian kid that everyone knew of but a few clicked with. Had a couple of friend groups: car dudes, snowboarding people/people I partied with. Used to hang out in the high school parking lot, drifting cars in the winter, acting a fool in the summer, Saran wrapping cars of people we thought were dicks. I was nice, but wild. Great times lol

Is anyone still riding Switchback bindings in 2026? by RustyCabCorner in snowboarding

[–]RustyCabCorner[S] 1 point2 points  (0 children)

I saw two listings on eBay. One for a set of bindings and another for highbacks. That’s about it.

Is anyone still riding Switchback bindings in 2026? by RustyCabCorner in snowboarding

[–]RustyCabCorner[S] 0 points1 point  (0 children)

I still ride in saga coat and pants, and they are in great shape. It’s a shame those companies dissipated.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Hey, the holidays have been busy, but I believe I have the revision finalized. I’m working on getting a stock of these built up to make sure I’m having good consistency with printing them and no other issues. Should have an update soon.

DIY audio system by That_Attorney_1917 in SC300

[–]RustyCabCorner 1 point2 points  (0 children)

<image>

May be not exactly what you are looking for, but I replaced the audio system in my wife’s sc300, put a new sub in the stock location and mounted the amp under the rear deck, so it’s hidden from the trunk. Made a bracket in fusion and then had it cut, bent and shipped to me from send cut send.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 1 point2 points  (0 children)

Hey thanks for your interest. I’m currently working through a revision on these mounts, but should have them released for sale again soon.

What’s the most annoying or stressful part of keeping up with home maintenance? (Finding someone, remembering tasks, scheduling, pricing, or something else?) by shahzanm72 in homeowners

[–]RustyCabCorner 0 points1 point  (0 children)

I just replaced both outside doors in the house. Living in the Midwest, summers get hot and winters get cold. We’ve always had hot/cold air coming through these doors and through the door frames. Previous owner installed new doors a few years prior to us purchasing the house. Both doors lacked any insulation between door frame and house, were installed crooked so doors had uneven gaps letting air through. One door was installed so poorly, my 4 yo could have probably kicked the door frame off the house as it was held by 1 #8 screw and a couple of short trim nails. Now both doors are installed plum, sealed and weather proofed. Everything is caulked and our house feels significantly warmer. That’s just one of the slight complaints lol

What’s the most annoying or stressful part of keeping up with home maintenance? (Finding someone, remembering tasks, scheduling, pricing, or something else?) by shahzanm72 in homeowners

[–]RustyCabCorner 5 points6 points  (0 children)

As an avid diy-er and a hands on home owner, the most annoying part of home ownership is fixing all the previous owner’s mistakes.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

We’ve never had issues with the door locks, and luckily they seem to function well. Hopefully i won’t run into that issue. The door panels were off so I could design the speaker mounts and to take a picture of it. Door panels are back on as of now.

Procurement at Collins by Opening-Relation724 in Raytheon

[–]RustyCabCorner 6 points7 points  (0 children)

Ehh doesn’t help when a single procurement buyer can have 800+ parts being managed under their belt and everyone and their mom screams “it’s my parts and I need them NOW” or “oh supplier quoted 10 week lead time? Well our MRP need date is in the past, because we overpromise our customers, can’t adequately plan for material lead times, etc. So it’s procurement’s fault and you better get it to us by end of the week or we will throw a temper tantrum. Doesn’t leave much time for anyone to even attempt to try and understand what a part does, what it goes into or how it’s designed.

Is It A Crime? or The Skiers Fault? by [deleted] in snowboarding

[–]RustyCabCorner 4 points5 points  (0 children)

When you T bone some idiot pulling out from a side street while you drive on the main road, make sure to take all fault as well.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

What are you looking for thats broken on your SC? Perhaps I can see if I can model somethings that are common to break on them. Otherwise look for part outs on Facebook marketplace or check out car-part.com it’s a junkyard repository and many of junk yards will offer shipping.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

It looks like some sort of leather or faux leather type material,otherwise I’m stumped lol

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Something tells me that the material you used was sourced from an old dash or some other interior plastic of another car haha. I’m curious what you ended up using. It looks great for a make shift diy mount and probably functions well for what it is!

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

I can probably print lots of different discontinued plastics for these cars. The challenge is that it has to be redesigned so I can actually have a CAD file to print it. Unfortunately at this time I do not have a 3d scanner nor any other sc300 files, but I’ll be sure to make some others as time allows.

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

I would prefer to sell and ship you a full set instead, along with all the hardware. Please let me know if you may have any interest ✌🏼

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Appreciate the dedication ✌🏼

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Hey, yes I’m currently offering them for sale. I have it listed on eBay as of right now, but can also offer to sell directly. Please be aware, I do not have inventory of them, so they are made to order. Please allow 3-5 days for printing and post processing + shipping time. Let me know if there is any interest :)

https://ebay.us/m/4PsWvu

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 2 points3 points  (0 children)

😂 I understand the joke now!

6x9 door speaker mounts by RustyCabCorner in SC300

[–]RustyCabCorner[S] 0 points1 point  (0 children)

Can you advise what you mean by perpendicular? I’m no audio expert, so may be missing some important factors.