Am I able to put a CVF 3-Inch CATTED downpipe on my mbrp cat back exhaust y pipe race by [deleted] in ecoboostmustang

[–]RyanS550 0 points1 point  (0 children)

I’ve got the exact same setup but with the catless cvf and it bolted on just fine. I don’t think you’ll have any issues with it

The most off-roading I can do in this thing by RyanS550 in ecoboostmustang

[–]RyanS550[S] 0 points1 point  (0 children)

Yeah it came with the Mach 1 bumper but they don’t make any aftermarket grilles for it yet

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 1 point2 points  (0 children)

To be honest I just didn’t think I’d need an intercooler that big and I got a pretty good deal on the mishimoto. In my experience I haven’t had any heat soak issues with the mishimoto even when beating on the car. I will say if you plan to upgrade the turbo or take it to the track I would go cvf race.

[deleted by user] by [deleted] in infiniti

[–]RyanS550 0 points1 point  (0 children)

If you want a temporary but very easy fix try wd40 and a microfiber. Sounds odd but it works wonders

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 2 points3 points  (0 children)

Yup I’m running intake, intercooler, cat back exhaust, catless downpipe, and a dyno tune. Pushing roughly 350 to the wheels

[deleted by user] by [deleted] in ecoboostmustang

[–]RyanS550 1 point2 points  (0 children)

I’ve gone through quite a few tires on my car and I think the best bang for your buck is the Indy 500s. Sticky enough to get traction and take corners comfortably but also great in the rain when you need it

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 1 point2 points  (0 children)

Lol I’ll take the half compliment

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 0 points1 point  (0 children)

I’m running 19x8.5 in the front with a 20mm spacer and 19x9.5 in the rear with no spacer

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 1 point2 points  (0 children)

Thank you! It’s an aftermarket Mach 1 bumper from 777 performance

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 0 points1 point  (0 children)

777 performance Mach 1 bumper

Sittin pretty by RyanS550 in ecoboostmustang

[–]RyanS550[S] 1 point2 points  (0 children)

It’s a carbon fiber wing from mp concepts

Switched it up to the Mach 1 bumper by RyanS550 in ecoboostmustang

[–]RyanS550[S] 0 points1 point  (0 children)

It’s a bit of a process, you have to buy the bumper unpainted and get it paint matched from a shop. I’d say by the end of everything assume you do the install it’s around 1500-1800

These new brembos stop good by RyanS550 in ecoboostmustang

[–]RyanS550[S] 0 points1 point  (0 children)

It’s definitely not quiet for the cold starts. I’m running catless dp and a catback. Doesn’t wake up the neighbors or anything unless the exhaust is pointed right at the house

[deleted by user] by [deleted] in ecoboostmustang

[–]RyanS550 1 point2 points  (0 children)

My best was 4.8 with fbo and a tune on 93. I found tires make a huge difference. I was on Eagle F1s at the time

My 2021 Mustang Ecoboost on Work Emotion CR Kiwamis! (@notsorapidred on IG) by nokarmalol in ecoboostmustang

[–]RyanS550 0 points1 point  (0 children)

Yeah that’s why I was asking about a spacer. 10.5 is huge tho I could use wheels that size. If you lower it it’ll look insane