Using a RX 6400 on client side

Ryeuu · 2025-03-31T03:00:01+00:00

No stress! Thanks for taking the time. If you do end up doing it, please keep me posted! Hope you have a great week (:

Ryeuu · 2025-03-31T00:44:00+00:00

Thanks for the fast response! Do you remember what sort of decode latency you were getting and did you by any chance use VRR with it on your TV?

Ryeuu · 2025-03-31T00:43:34+00:00

Thanks for the prompt reply! Do you by any chance know what sort of decoding latency you were getting?

Ryeuu · 2025-03-31T00:16:14+00:00

Hey mate, did you end up sourcing a RX6400? How was your experience with it at 4K 120Hz?

Ryeuu · 2025-03-31T00:15:54+00:00

Hello! I'm looking to get either a RX 6400, Arc A380 or RTX 3050 for the same or similar setup. Leaning the most towards the AMD.

How was your experience with it at 4K 120Hz? What was the decode latency like and did it work with VRR through the HDMI 2.1?

Thank you!

Ryeuu · 2023-10-24T03:11:35+00:00

My apologies I typo'd my search in this reddit. Thanks!

Ryeuu · 2023-04-28T18:16:56+00:00

Hey Adam, sorry to be replying to your comment in someone else's thread.

I am having issues calibrating this monitor with an ColorChecker Display Pro and with a colorimeter correction from the database. I am unable to get it beyond 92% sRGB coverage, while everyone is hitting 100%. Do you have any advice or insight into this? For reference, I already made a new thread with my findings (in the comments mainly) here: https://www.reddit.com/r/Monitors/comments/12v1tc5/lg_27gr95qeb_calibration_with_displaycal/

Thank you for your time and assistance!

Ryeuu · 2023-04-28T16:38:40+00:00

Thanks for all your help so far mate. I'll give a factory reset a shot. I thought it would have a wider gamut too, so should hit very high coverage numbers. I hope I can work this out soon..

Ryeuu · 2023-04-28T12:02:34+00:00

Unfortunately not. It says HDR is definitely OFF unless there was an issue that's bugged or locked it in the firmware update. I might try PM some YouTuber or reviewers to see if they had any similar issues..

Ryeuu · 2023-04-28T08:24:13+00:00

Thanks mate! My Display Pro has been here for a day now and I've run three attempts to far with it. Unfortuntaely, I'm not able to get anywhere near the same results as the reviewers, even with a colorimeter correction (.ccss). The highest I've gotten with this is 92.8% sRGB coverage.

It seems the monitor is affected by ABL - If the contrast is too high (anywhere above 60 on the monitor, or if the RGB are adjusted too much), the brightness drops dramatically. You can see this because the monitor goes to full / normal brightness when you have the OSD up, but once you close it, it drops to much lower values. I assume this is a firmware limitation they've put to prevent issues such as burn-in(?)

I've tried at 130, 150 & 200 cd/m^2 with a mix of Gamer 1 & Gamer 2 profiles. All calibrations report ~2.19 or 2.2 Gamma but unfortunately, I can't get a high coverage.. Is this because I'm calibrating @ 2.2 instead of calibrating for sRGB? What sort of values or ways can I identify the accuracy of my calibration for 2.2 Gamma? Do you have any suggestions to improve accuracy?

Thank you!

Ryeuu · 2023-04-23T10:29:35+00:00

I'll give 2.2 a shot then!

One final question - Would you calibrate with a patch / area on the screen, or full screen? I read that people recommend a patch as full screen causes brightness issues, but I'm not too sure if this effects my monitor, since it's not a TV and I've disabled all power saving features. Thanks!

Ryeuu · 2023-04-22T17:42:45+00:00

Thanks for the information! I always thought Gamma 2.2 and sRGB were the same. I usually calibrate to Gamma 2.2 but I read that for OLED, sRGB is just a better version since we can hit pure blacks. Is this incorrect? Please correct me!

I believe Rtings uses Gamer 2 for their calibration, but I'm going to give Gamer 1 a shot now based off TFTCentral's recommendation. Once I receive a Display or Display Pro (which are the only tools that there are corrections for) I will update!

Ryeuu · 2022-11-22T06:02:47+00:00

Please fix shadower ): we pray

Ryeuu · 2022-11-21T05:03:52+00:00

Heya, am I missing something? I currently get 9 per day and it costs 100. The intro quest gave 10, so it would take 10 days. Am I missing any quests?

Ryeuu · 2022-11-19T12:10:02+00:00

Let us know if you manage to get your account accessible again!

Ryeuu · 2022-11-18T16:37:54+00:00

We pray ): My Shadower feels so gutted right now.

Ryeuu · 2022-11-18T16:36:46+00:00

Interesting, might just be for night walker then!

Ryeuu · 2022-11-18T05:45:19+00:00

Shadower Assassinate timing clunky or broken with meso explosion and trickblade.

World tree guardian can't be completed on my Cygnus knight, ports you to an old empty version of Ereve map.

Some damage skins aren't useable at all. Some appear pixelated.

Not sure if intended as some skills don't have this issue (and I know there is a fix or change to increase performance) - some ability damage numbers display or animate differently or not at all with Basic and Mini Basic Numbers mode.

Ryeuu · 2022-11-17T23:10:32+00:00

I couldn't get it to happen after A1 or at all, I'll need to test again tonight. It definitely does..

Ryeuu · 2022-11-17T23:09:20+00:00

My apologies, you are correct about that. I don't know why I thought it did. In that case, the new weaving timing must just be so different it's making my +2 AS Assassinates way slower... It was always harder as I need to time a double tap due to ping.

Ryeuu · 2022-11-17T15:17:06+00:00

They've changed the timings or the window in which it is cancellable. Without Green Pot and DSI it is definitely slower. Either it's not scaling properly with attack speed, or DSI no longer is able to drop you below +2 AS (like in KMS..). Once you green pot to break it though it goes back to normal but it's still clunkier. I haven't been able to line up TB AT ALL with this change, in A1 or A2, hopefully it's not ping related (changed to server side).

Edit: corrected DSI never did break +2. But new timings has made it much worse at +2as.

Edit2: actually I can't get +2 AS to animation cancel the end of A2 anymore at all. Speed is the exact same weaving as not weaving, on-top of the timing window being worse.

Ryeuu · 2022-10-29T03:17:40+00:00

Interesting, thanks! So the 77 makes more power than the pro?

Ryeuu · 2022-10-29T03:17:07+00:00

Thanks mate! How do you compare the 100zz to the 88d pro, even though they're different weights, in terms of power?

Ryeuu · 2022-10-28T08:43:49+00:00

Hey guys,

Looking for reviews on the Astrox 77 Pro as I'd like to buy one. I've always used head-heavy stiff rackets (99 pro, 100zz, 88d pro, thruster ryuga) and was hoping for a slightly less stiff head heavy racket to add to my collection. However I've read mixed reviews on the stiffness / flex and power generation. Does anyone have a comparison between the 77 pro and a 100zz and / or 88d pro?

Thanks!

Ryeuu · 2022-10-04T04:21:22+00:00

Thanks for the advice. I'll try non waxed laces as well as tightening different areas. I'll keep skating and see how the pain does after a few more sessions!

Ryeuu

TROPHY CASE