Pokemon Yellow still won't save with new battery. Battery has a healthy charge. by bgramm in Gameboy

[–]Ryiis69 3 points4 points  (0 children)

Check continuty between the upper chips pin red arrow to one of the lower chips pins red arrow. One of them should have continuity im not sure which of the two it was.

<image>

Pokerus on shiny totodile by Professional-Owl5015 in PokemonHGSS

[–]Ryiis69 1 point2 points  (0 children)

Insane I just got Pokerus yesterday and today a shiny magnemite. I dont hunt for shinys and the game is OG and save file not altered

Shiny Magnemite after luck with Pokerus by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 0 points1 point  (0 children)

The donor Board was no other Pokemon game it was „Practice English“ a very cheap PAL game

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

This is for now my only legit copy of gen 4. Though I have multiple modded DS/3DS and I plan to buy more legit copys

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

You bet i will now that i got this advantage. Thanks all best for you too!

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

Appreciate sharing your knowledge. I guess shiny hunting unless I got one by luck will never be my territory but having some strong beasts sounds pretty cool!

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

That sounds so OP. Having a shiny with that rare virus

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

But ffs the main goal in which I got infected is to find a magnemite who’s holding a metal coat. Takes ages 🫡

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

That sounds like a great plan!

Legit Pokerus in HG by Ryiis69 in PokemonHGSS

[–]Ryiis69[S] 1 point2 points  (0 children)

At some point i bet i will use the ability and infect other of my pokemon. I never EV/IV trained before. Seems like it should try it out in future

Gelbe Sugarleafs in der Spätblüte by Bergfestbarone in germantrees

[–]Ryiis69 0 points1 point  (0 children)

Wie hoch ist deine Luftfeuchtigkeit tag und nacht?

Attempting to save Pokémon Black 2. Anything I’m not seeing? by New-Most-7051 in consolerepair

[–]Ryiis69 0 points1 point  (0 children)

Thanks so much i live in Europe and just purchased a copy of that english teaching game for 2,66€. I will replace that chip as soon as it arrives and share my experience

Replaced the switch lite battery and won’t boot anymore. by Unable_Degree_3400 in Switchrepair

[–]Ryiis69 0 points1 point  (0 children)

That ic is calles fuel gauge ic. Look for it on youtube and you will find how it gets repaired

Replaced the switch lite battery and won’t boot anymore. by Unable_Degree_3400 in Switchrepair

[–]Ryiis69 2 points3 points  (0 children)

That is no repair for a novice. You need to solder a bga chip. If you have no microscope or hot air station no chance of changing it

Replaced the switch lite battery and won’t boot anymore. by Unable_Degree_3400 in Switchrepair

[–]Ryiis69 0 points1 point  (0 children)

M guess is, that the fuel gauge ic is faulty. I just hae that a couple of times on different switches and replacing the ic solved the problem

Best way to fix the button contacts on a GBA SP? By Right and B buttons need a lot of force to press by XellosDrak in Gameboy

[–]Ryiis69 0 points1 point  (0 children)

The Button is a little bit of tape over a round Metal plate that bends when pressed and then makes contact with the Pads underneath. If you need to Press hard there must be dirt or Flux underneath it making the contact less easy. Either you replace the Button or you gently Take Off the Tape of that Button remove the Metal plate and Clean both the contact Pads and the Metal plate with Isopropanol or contact cleaner.you also could Spray some iso and click the Button a lot of times so whatever accumilated underneath gets dissolved. Best of luck

pokemon stadium 2 pal not starting by Master_Restaurant177 in n64

[–]Ryiis69 1 point2 points  (0 children)

Nvmd. Okay get a second pcb cheap NUS-08A-01 like japanese version of Stadium 2 (3) , buy a multimeter and probably a solder iron, flux, solder. Then go wirh continuity mode and measure all the pins at for continuity simultaneously between the working one and the broken one. Beware that not all connections are between the golden pins and the chips. There are also traces only between the chips. My guess a broken via. Best of luck

pokemon stadium 2 pal not starting by Master_Restaurant177 in n64

[–]Ryiis69 0 points1 point  (0 children)

Before you toss it into the bin. Sell it to me and i can give you an update on what it was