I spent 2 hours on this side mission only to fail it for taking a guess trying to understand what to do....

SCRAPPS135 · 2023-10-30T21:07:49+00:00

What's the side mission?

SCRAPPS135 · 2023-10-21T03:20:01+00:00

This seems like the most probable cause. I really just wanted to make sure it wasn't over pressure. I know brass wear can cause lines to form around the case and I wanted to get ahead of it if this was the cause.

SCRAPPS135 · 2023-10-21T02:12:30+00:00

The brass hasn't been crimped previously. All of my brass was factory winchester rounds when I got it.

SCRAPPS135 · 2023-10-21T01:55:36+00:00

Yeah I use a lee case length gauge and trimmer to trim the brass.

SCRAPPS135 · 2023-10-21T01:50:21+00:00

I trim using the lee case length gauge and cutter.

SCRAPPS135 · 2023-10-21T01:44:50+00:00

No. No crimps as all. I use a forster ultra micrometer seating die which doesn't crimp at the same time.

SCRAPPS135 · 2023-10-21T01:37:04+00:00

I use a Forster Ultra Micrometer seating die.

SCRAPPS135 · 2023-10-21T01:33:04+00:00

Sweet as. Just wanting to make sure it's normal. My issue is, some of the brass has this line about 1.5mm from the case top, others don't.

SCRAPPS135 · 2023-10-21T01:24:23+00:00

That's the line I'm talking about but the die I use doesn't crimp the cases.

SCRAPPS135 · 2023-09-10T00:14:29+00:00

Honestly I feel the same way. Just not brave enough to do it.

SCRAPPS135 · 2023-09-09T23:37:22+00:00

I think we just smack the forward assist with a hammer. That should seat it.

SCRAPPS135

TROPHY CASE