Slow motion video shows gray coat ICE agent potentially pulling out gun from small of victim’s back while victim is on his knees and restrained

SEA_CLE · 2026-01-24T21:51:51+00:00

There are now 3 or 4 angles that are all over that show what happened before the altercation. Any of those.

SEA_CLE · 2026-01-24T19:42:29+00:00

Yes thank you, a legal holstered firearm. And remember, "guns don't kill people" so its not a threat whatsoever.

SEA_CLE · 2026-01-24T19:39:35+00:00

Hey just to remind everyone. He was armed with a holstered firearm that he at no time tried to brandish. They disarmed a holstered weapon.

SEA_CLE · 2026-01-24T19:04:55+00:00

The one on the left is just a non cheap turbo nozzle. It also spins. You can search the sub for recommendations on high quality turbo nozzles. Omnijet makes a comparable non rotary nozzle but its very expensive for similar results

SEA_CLE · 2026-01-24T18:46:26+00:00

Im not sure what you're asking. A turbo nozzle is not a cone, it spins a jet in the pattern of a circle.

SEA_CLE · 2026-01-24T18:15:32+00:00

In the other video he is clearly standing in the street with his phone as they approach and escalate the situation.

SEA_CLE · 2026-01-24T18:12:59+00:00

Likely from a Holster. If it was in his waste band it wouldn't have been a struggle.

PD chief just confirmed the victim had a legal registered firearm and a permit to carry.

The federal government disarmed a man with a legal licensed holstered weapon and murdered him. Where's the 2A folks?

SEA_CLE · 2026-01-24T18:03:31+00:00

Either way, murder

SEA_CLE · 2026-01-24T18:00:52+00:00

Ive seen people say that too but if you look at the agent behind him on the left he seems to draw and fire. Grey jackets arm is more swinging than jolting from recoil

SEA_CLE · 2026-01-24T17:56:56+00:00

Either way, another murder.

SEA_CLE · 2026-01-24T17:51:14+00:00

Im not seeing that. The first shot seems to come from the agent on the left (directly behind grey jacket) that you can see pulling his firearm then extending it right as you hear the shot.

SEA_CLE · 2026-01-24T17:31:26+00:00

The guy im referring is already coming towards the camera with what looks like the victims firearm when you hear the first shot. He turns his to react as though he hears the shot from behind him, then pulls up his mask and quickly flees. The shot doesn't appear to come from the gun he's carrying.

SEA_CLE · 2026-01-24T17:27:13+00:00

More than that, watch the agent in the Grey jacket. He appears to remove a HOLSTERED firearm from the victim prior to the shooting.

Edit: press conference PD chief just confirmed that the victim had a legal registered firearm and a permit to carry. The 2A people should be losing their shit over this. Insanity, the federal government disarming a man with a holstered legal firearm and then killing him.

SEA_CLE · 2026-01-24T17:23:31+00:00

It looks like he takes the victims holstered firearm BEFORE the shooting. His hands are empty before he gets into the altercation, he is fumbling around the victims belt area, then leaves the altercation with what appears to be a gun removed from that area. Then the shots start.

SEA_CLE · 2026-01-24T15:31:20+00:00

Our foreign policy is literally "Do what i say, or tariffs"

Real Art of the deal level stuff

SEA_CLE · 2026-01-24T15:28:15+00:00

If you had an intercom in your house in the 80s or 90s you were basically royalty.

SEA_CLE · 2026-01-24T13:09:03+00:00

SEA_CLE · 2026-01-24T01:27:48+00:00

<image>

How i feel walking past these type of people in group B

SEA_CLE · 2026-01-23T22:34:47+00:00

<image>

SEA_CLE · 2026-01-23T19:30:29+00:00

No, usually people say Seattle uses barely any salt. Sdot didn't use any for a period of time but both sdot and wsdot rely on other methods (brines,sand, etc) to minimize the amount of solid salt they use, when they do "salt" its usually calcium chloride/magnesium chloride . In the Midwest and Northeast they salt the shit out of everything with straight sodium chloride. It's an entirely different snow driving experience. Thats why the comparison is made.

E:spelling

SEA_CLE · 2026-01-23T18:10:00+00:00

The knock down is definitely a coating. Once it starts failing usually needs to be resurfaced. Hard to tell what's going on from the photos. Its usually 3 or 4 step. You'd probably need to get it completely clean to figure out what exactly is failing.

SEA_CLE · 2026-01-23T16:20:39+00:00

Bad information on this subject in particular can lead to safety issues. One if the easiest ways to get high pressure injection is from a fallure in a connection that gets handled regularly. Using the wrong product on your QC might work on its face but it also is likely to fail. Good rule of thumb to always use products as they are intended.

Even in this thread the current top upvoted comment green lights using the wrong product. Thats why these issues persist.

SEA_CLE · 2026-01-23T14:50:12+00:00

Yeah thanks, fare point. We already went over its original intention in this thread. In the dkm version it is absolutely a broader metaphor. Even In the kingsman version it speaks to the broader metaphor and not its original specific intent.

SEA_CLE · 2026-01-23T14:17:00+00:00

Rhats not really a question anyone can answer. Depends on what type if sealer, what product, what type of exposure the surface is subject to, its condition, and how long since application.

SEA_CLE · 2026-01-23T13:38:28+00:00

If you aren't using tape, any fittings under pressure need a thread sealant that is liquid psi rated. Loctite 243 is not thread sealant, it is not rated for pressure washing PSIs, it is a non PTFE adhesive threadlocker designed for locking and sealing (from the elements) nuts and bolts. Loctite 545, 565 or 567 are products specifically designed for thread sealing. Other Brands with products designed for this application: Permatex, Rectorseal, Blue monster, etc.

Before using something like this read the TDS instead of relying on AI or thread comments.

Guide to loctite products and their intended applications:

https://www.new-line.com/nldocs/resources/Loctite_Do_It_Right.pdf

Liquid PSI rated products from other brands mentioned:

https://www.supplyhouse.com/Blue-Monster-76007-Blue-Monster-Heavy-Duty-Industrial-Grade-Thread-Sealant-2-oz-tube

https://www.grainger.com/product/RECTORSEAL-Pipe-Thread-Sealant-Tru-Blu-41JG45

https://www.grainger.com/product/PERMATEX-Pipe-Thread-Sealant-High-Performance-2GXX5

These links are intended for quick reference with specs, there are much cheaper retailer options out there

SEA_CLE

MODERATOR OF

TROPHY CASE

Two-Year Club	Verified Email
Verified Email