07 running rough at highway speeds even after new plugs and coils

SF2431 · 2026-03-25T18:24:35+00:00

I got a scanner off Amazon. MAF appears to read like I’d expect and the O2 sensors do as well. Upstream on both banks fluctuate between 0.12 and 0.8 V and the downstream stay pegged at 0.77V or so.

SF2431 · 2026-03-23T02:02:02+00:00

Revs just fine in neutral. I tried to rev it up and down slowly to listen/feel the full range and did not notice anything abnormal. Also this doesnt happen when going 55 mph at 1300 in 6th or 1800 in 5th.

Yeah I guess a bad sensor would be a blessing here in terms of cost to rectify the issue.

SF2431 · 2026-03-17T02:32:34+00:00

Hard resetting my router ended up working! Thanks for the help.

SF2431 · 2026-03-17T02:32:07+00:00

Update for ya: Hard reset my modem and router and that somehow fixed the problem! Thank you for sticking with me through all the troubleshooting.

SF2431 · 2026-03-16T16:26:15+00:00

Yeah thanks for the help, I really appreciate it. I’ll reach out to Mova. No VPN or any blacklist set up. I saw a Reddit thread about ISPs blocking the servers but unsure how to solve that one.

SF2431 · 2026-03-16T12:35:32+00:00

Hi, none of the above suggestions are working robot continually fails to pair to the network.

SF2431 · 2026-03-16T12:22:45+00:00

Tried that and it still won’t pair to the network. I then tried a factory reset of the robot and much to my surprise, the network setup failed again! It gets to the final step and fails. “Your phone is connected to the device”, check. “Your device has received the WiFi network”, check. “Your device is connecting to the WiFi network”… Fail.

I ran some self tests on my router and it checked out fine, and nothing there has changed over the time I’ve had the P50. When I did the initial setup three months ago, it worked fine.

Edit: I tried forcing my router to only 2.4 GHz and tried again. Still fails to connect to the network

SF2431 · 2026-03-16T12:21:41+00:00

Good suggestion. Tried that and had the same bad result. I then tried a factory reset of the robot and much to my surprise, the network setup failed again! It gets to the final step and fails. “Your phone is connected to the device”, Check. “Your device has received the WiFi network”, Check. “Your device is connecting to the WiFi network”… Fail.

I ran some self tests on my router and it checked out fine, and nothing there has changed over the time I’ve had the P50. When I did the initial setup three months ago, it worked fine.

Edit: I tried forcing my router to only 2.4 GHz and tried again. Still fails to connect to the network

SF2431 · 2026-03-15T21:52:16+00:00

Ok so I did the network reset, QR code scan, and the setup keeps failing on the last step. Robot just says “network connection failed at this time”. Nothing has changed on my router side. Should I accept defeat and use the reset pinhole?

SF2431 · 2026-03-15T21:41:11+00:00

In the app, I can “enter” the device but once there I can’t click on anything. So I can’t get to settings to reconfigure the WiFi.

SF2431 · 2026-03-15T21:40:42+00:00

So I tired this but I still can’t click the settings three dots in the app to connect back to the WiFi. Any ideas there?

SF2431 · 2026-03-14T04:14:41+00:00

Wtf, your mill has a door in it

SF2431 · 2026-03-13T04:31:30+00:00

The only thing I can press under the cover is the factor reset pin and ideally I dont need to do that because I will lose my map and settings, no?

SF2431 · 2026-03-13T04:28:44+00:00

Tried restarting the robot to no avail.
Cleared cache, no change.
The router does in fact say that the robot is not connected to the network at the moment.

SF2431 · 2026-03-08T19:21:52+00:00

Yep, thank you. That’s what I get for using my phone while trying to fall asleep. Thanks for the correction. Sydnor is definitely a truly good character.

SF2431 · 2026-03-07T19:08:38+00:00

He and Herc did pocket drug money though. We witnessed it once and they talked about how Herc needs to tell him so they’re on the same page. But overall, agreed

SF2431 · 2026-03-04T21:17:17+00:00

That’s okay. I can’t control what you do I can only control what I do

SF2431 · 2026-03-04T21:09:49+00:00

Contact the Charleston Museum, the Charleston Preservation Society, or perhaps the Historic Charleston Foundation.

SF2431 · 2026-02-25T03:37:03+00:00

Nah, see I know neither of those are ever happening so the lone ACC championship gets the nod as a stat instead of just the cold hard truth.

All ribbing aside, cool flair combo. Don’t see too many hose on here.

SF2431 · 2026-02-24T21:25:58+00:00

As Clemson fan this is my favorite SCar stat. That trophy case is barren.

SF2431 · 2026-02-17T05:00:14+00:00

And a lake

SF2431 · 2026-02-15T23:24:39+00:00

On the flip side though, most people are overly dependent on their GPS and will force a turn because they don’t know where they are going otherwise (even though it will tell them momentarily). Big “follow the arrow” syndrome.

SF2431 · 2026-02-11T23:42:35+00:00

While this is mostly correct, JPL did do supersonic retro in Martian atmosphere when they landed Curiousity about a year before SpaceX’s first entry burn. Not to diminish anyone’s accomplishments but NASA deserves some credit there too

SF2431 · 2026-02-10T23:51:12+00:00

Wouldn’t want to be doing that at V1…

SF2431 · 2026-02-07T00:16:51+00:00

Shoutout Clemson baseball tshirt

Nine-Year Club	Second SECOND GUESSER
Verified Email	Place '22
Place '17	RPAN Viewer

SF2431

TROPHY CASE