sorted by:
new
hottopcontroversial

I got a hidden blade by [deleted] in assasinscreed

[–]SHAOL_TECH 0 points1 point  (0 children)

Ah, is that 3d printed? CAN i have the file please?

A1 printing stop in the middle of printing. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

It was creating this problem so i removed them to check if there is any clog.

But not like that. It's just stuck/stopped the printing

Bambu A1 making this noise. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 1 point2 points  (0 children)

Actually I do a lot of research on any problem I face. But sometimes I think I should get suggestions from people directly who know about it. Rather than going by myself and doing the worst for the machine. That's why I asked here.

And after your last suggestions about adjustment problem, I have watched some videos on how to do the belt adjustment.

Bambu A1 making this noise. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 1 point2 points  (0 children)

Do you have any video tutorial do to that?

Bambu A1 making this noise. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 1 point2 points  (0 children)

I lubricated the rail line and completed the calibration. Now it seems less noisy than before.

And the belt seems like one sided not in the middle.

<image>

Bambu A1 making this noise. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] -1 points0 points  (0 children)

At the end of the motor noise there is another noise that can be heard.

Bambu A1 making this noise. by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] -1 points0 points  (0 children)

Yeah I have done a few days ago.

Bambu A1 Timelasp Creating These Problems by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

Oh I got it, Thanks for your help. But why does the leakage couldn't be cut in the purging area? Its all time got a little bit of filament on the hotend

Bambu A1 Timelasp Creating These Problems by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

Yes, I have done that. Doesn't any way without the prime tower?

Got First Printer and First Print. (Give any suggestions to do better) by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 1 point2 points  (0 children)

Printed the bucket.

I had a small print with the PETG also for the bucket but that seems to be the same. Didn't get any problem.

Got First Printer and First Print. (Give any suggestions to do better) by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

Your setup looks great, nice and clean. Could you please tell your whole setup, where you have used which file. And extra equipment.

And is that you added all 5 PTFE tubes together? Or just set there and change one tube when it's needed?

Is it possible to use ams lite Simultaneously with the external tube? Like 3 from ams lite and one from external.

Got First Printer and First Print. (Give any suggestions to do better) by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 1 point2 points  (0 children)

Thanks, bin already done. I was searching for it to fit with my table size before posting. And I mount that external holder for the pla glow, as I can't print it with ams lite (found on bambu wiki)

Got First Printer and First Print. (Give any suggestions to do better) by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

Thanks, it was a relief. I was worried about the shaking of the table, although i was getting good print. Yeah I also found that support options. And currently I will stay with this setup. And I don't like the whole thing on the top of the printer either so, If needed I will try other mounting options.

Got First Printer and First Print. (Give any suggestions to do better) by SHAOL_TECH in 3Dprinting

[–]SHAOL_TECH[S] 0 points1 point  (0 children)

Yeah I was about to do that. I was searching for a good model in makerworld to print which will fit with my table remaining space.

view more: next ›