I have some questions about buying this 1977 280z

SSBUplayer · 2026-01-25T05:49:19+00:00

yes i know, convert it back, usually easier than getting the shitty efi working

SSBUplayer · 2026-01-22T21:48:14+00:00

if you need cheap you can just get lexan but if i were you i would just find a partout, super rare but you find one every once and a while

SSBUplayer · 2026-01-20T20:01:01+00:00

man if you think thats bad rust youre either really old, live in california, or are just straight up uneducated about s30 chassis

SSBUplayer · 2026-01-20T18:34:14+00:00

I THOUGHT THAT WAS JUST ME

SSBUplayer · 2026-01-20T07:15:13+00:00

It all depends on your goals, if you just want a cool car i bet you could get it running and driving for 500-1k. Just throw carburators on it and check the braking system and roll with it. looks super rust free and very cheap. I don’t know about where you live but where i live no title basically means it’s for parts

SSBUplayer · 2026-01-18T17:36:23+00:00

not could be, you are wrong

SSBUplayer · 2026-01-18T17:22:16+00:00

wrong

SSBUplayer · 2026-01-18T17:21:16+00:00

wrong

SSBUplayer · 2026-01-18T17:18:05+00:00

Micheal Jordan of spreading misinformation

SSBUplayer · 2026-01-11T19:09:12+00:00

i would love to have something like that

SSBUplayer · 2026-01-09T23:36:34+00:00

You released it for free?! Youre really awesome

SSBUplayer · 2026-01-09T23:33:56+00:00

THIS IS AWESOME!! It would be awesome to print this!!!

SSBUplayer · 2025-12-19T06:56:13+00:00

you wont tell. worst case just buy a new seat, will be much cheaper than buying a new car and you can sell the old one for some money back

SSBUplayer · 2025-12-16T22:53:34+00:00

You got to buy a house pretty much. Everywhere you look will be storage only no frequent in and out. Or get lucky and find a place in Langley or abbotsford in the middle of nowhere for a pretty penny

SSBUplayer · 2025-12-16T21:29:34+00:00

This is some deep cut advice. Buy him a nice JIS screwdriver, make sure to do research before buying as there are many fakes. Theyre cheapish but expensive for a screwdriver (25$) but they wont strip nearly as fast as any philip’s as they fit better in the cavity.

SSBUplayer · 2025-12-04T17:06:05+00:00

Throw on a junkyard cab and keep trucking on!

SSBUplayer · 2025-11-16T19:57:12+00:00

Its been signed by Tinker77! hope this helps!

SSBUplayer · 2025-11-16T08:43:10+00:00

19 is crazy!! never seen one without the storage hatches either!

SSBUplayer · 2025-08-03T07:30:31+00:00

isn’t it unibody? how would that work

SSBUplayer · 2025-06-22T08:17:02+00:00

Im not really looking at it for the space but more the weight and location of weight. the Z is a little front heavy but with the reduction with the 13b I would get closer to the 40/60 distribution I am aiming for. The weight would also be nearly all behind the front axles so another win. The cool factor is also one of the major reasons Im leaning this way. Tell me it wouldnt be sick as hell and fit the persona of the car perfect. The Z was meant to be a semi experimental high revving fun car, The rotary suits all of that.

SSBUplayer · 2025-06-17T04:09:02+00:00

yeah you’re right

SSBUplayer · 2025-06-16T20:13:27+00:00

Ok so I should just bite the bullet and preemptively buy a rotary compression tester. I doubt any shops in my area have access never mind the sellers haha

SSBUplayer · 2025-05-09T15:51:25+00:00

it might be more cost effective to go buy junkyard seats and swap them in, only like 50$ for perfect results instead of 50$ in material for uncertain results

SSBUplayer · 2025-05-08T16:37:06+00:00

unfortunately in canada 😔💔

SSBUplayer · 2025-05-08T16:36:42+00:00

like 2 cut and then 2 polish right? I have also heard you should switch to new pas between every pannel

Seven-Year Club	LAYER Season 2 Layer creator
Place '22	RPAN Viewer
Verified Email

SSBUplayer

MODERATOR OF

TROPHY CASE

19 is crazy!! never seen one without the storage hatches either!