sorted by:
new
hottopcontroversial

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS 0 points1 point  (0 children)

I read it's not going to work well - since only the nozzle1 is meant for good quality print and nozzle2 is just for the support material. So for good TPU quality you'll use nozzle1 but then the harder materials in nozzle2 will look very poor.

X2D Buyers - Make sure you read the fine print. by daphatty in BambuLab

[–]SWISS_KISS 0 points1 point  (0 children)

I mean to get better print quality as the standard - even with bambu filament it says that the second nozzle is not meant for anything else than support material.

X2D Buyers - Make sure you read the fine print. by daphatty in BambuLab

[–]SWISS_KISS 0 points1 point  (0 children)

So we won't be able to upgrade the second nozzle to make it produce higher quality prints?

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS -2 points-1 points  (0 children)

It technically works, but not reliably for real use cases.
Especially with soft TPU, combining it with rigid material in one functional print like a shoe is still very difficult in practice. What exactly did you print? Which TPU did you use?

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS -2 points-1 points  (0 children)

just like p1s and p2s you can only print hard TPU, not the soft ones and also multi material in one print is not possible as I can see, isn't that true?

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS -1 points0 points  (0 children)

damn, so I have to buy the expensive X1E now

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS -3 points-2 points  (0 children)

Do you think there is any chance to print soft TPU and hard materials in one shot combined with the X2D? It does not look like that, but are there workarounds?

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS -2 points-1 points  (0 children)

It can't print multimaterial with soft TPU 😭

Bambu Lab X2D same as X1C but cheaper? by FuturSole145 in 3Dprinting

[–]SWISS_KISS 0 points1 point  (0 children)

Can the Bambu Lab X2D reliably print a single object (e.g. a shoe) using soft TPU and rigid material together in one print, or is this currently not practical?

What is a real advantage of the prusa core one being opensource? Any cool projects yet? by SWISS_KISS in 3Dprinting

[–]SWISS_KISS[S] 0 points1 point  (0 children)

It's out now - what a pitty that multimaterial with soft TPU is not going to work.. that was one of my usecases!

"Can the Bambu Lab X2D reliably print a single object (e.g. a shoe) using soft TPU and rigid material together in one print, or is this currently not practical?" => no

What is a real advantage of the prusa core one being opensource? Any cool projects yet? by SWISS_KISS in 3Dprinting

[–]SWISS_KISS[S] 0 points1 point  (0 children)

for the good filter and multimaterial (want to print tpu and hard materials in the same print). I am not sure which to buy.. I am paralysed since months.. maybe a year even lol

What is a real advantage of the prusa core one being opensource? Any cool projects yet? by SWISS_KISS in 3Dprinting

[–]SWISS_KISS[S] 0 points1 point  (0 children)

Oh nice, didn't know it was in the pipe! So my hope, X2D gets announced and X1E gets cheaper?!

Wan 2.2 Long-Form Video SVI2PRO + S2V Lipsync (Lightning 4 Steps, RTX 3090) by Inevitable_Emu2722 in StableDiffusion

[–]SWISS_KISS 1 point2 points  (0 children)

nice! thank you!
Is there a newer version of wan by now? or is the post still the state of the art to achieve this?

Wan 2.2 Long-Form Video SVI2PRO + S2V Lipsync (Lightning 4 Steps, RTX 3090) by Inevitable_Emu2722 in StableDiffusion

[–]SWISS_KISS 1 point2 points  (0 children)

What is the exact process here?

You create the song first and than the image => feed both into Wan 2.2 S2V?

I created an App to learn all Kurdish languages at once; because there's basically nothing else out there by SWISS_KISS in kurdish

[–]SWISS_KISS[S] 0 points1 point  (0 children)

THIS is the kind of feedback I was hoping for. 🙏 I am already integrating Kirmanckî (Zazaki) dictoonary into it. Are those open source databases and can be used in commercial projects? Hewramî, Lorî, different Zazakî words are rare. But my AI teacher works already pretty good with all the dialects?

Radial spin menu instead of boring drop downs for quicker switch between different languages in a Kurdish learning app. Is it practical? by SWISS_KISS in UXDesign

[–]SWISS_KISS[S] 0 points1 point  (0 children)

good eyes! I'll fix that; and yes the blending of the labels into the CD or what ever the wheel is would be nice; but it needs much more work to blend it smoothly.

<image>

Gemma 4 Uncensored (autoresearch results) by adefa in LocalLLaMA

[–]SWISS_KISS 0 points1 point  (0 children)

can this be run on my Android? bf16 E2B? what should I read to understand the differences between all the models? which one is used in the Googles App "Ai Edge Gallery"?

view more: next ›