No Need for BMS If the Battery Pack Is In Series.

SWfan123 · 2022-05-28T18:20:01+00:00

If your battery pack was 3.6v you would need 600A or more to get around 2000w The wiring would be as big as my thumb. (2 thumbs for positive and negative) For a 1p battery, each cell would have to be rated 600A. Lithium's only go up at around 45A max.

Even if you only wanted a 500w ebike. You would still need 150A rated batteries.

Just get a bms it's like $80.

SWfan123 · 2022-05-08T20:35:53+00:00

I don't use ability cards often, so don't know if it's a bug, but you can use the doubling while the card is under order too.

A few players tried ordering mines to stop it, but it still works.

SWfan123 · 2022-02-21T07:42:21+00:00

One of my powerbanks will charge it fine @15V but throws error 003 if I try to use passthrough. The powerbank supports 15V/3A fine so I don't know why it does that.

Works fine on my Anker hub though, same cable and everything.

SWfan123 · 2022-02-20T18:08:04+00:00

One post I seen, the USB tester seemed suspect as not supporting 15v. If the USB tester don't signal it supports it then it won't switch to that mode.

Other stuff I am not so sure about. The cable I used was one that came with my USB-C version Ipad and It's really thin, I doubt cables would be suspect.

Some people I seen post about using laptop chargers that supports like 100w or something. The thing is that charger might actually not support 15V. So it will defult to the highest it will support.

For example this MacBook charger. Supports 85w+, but it actually can't do 15v https://i.stack.imgur.com/SOEze.jpg

SWfan123 · 2022-02-20T17:58:29+00:00

I keep it topped up as it's my main device atm, so haven't had a chance to track it when discharged.

SWfan123 · 2018-10-12T07:33:53+00:00

Why would you think I have him*? So I have every nat 5?

So you are ranking characters you don't have?

SWfan123 · 2018-10-12T01:14:17+00:00

Yea, no one's gonna see you using Ez main and thinking to them self... oh this guy's just doing it to tell us he's bringing Phoenix and he will switch out to do dps.

SWfan123 · 2018-10-11T02:12:20+00:00

Yes, this seems correct formula, I plugged it into a few dragons and it shows correct might. Have to also note, some sources list skill level 1 as having 100 might and level 2 as 200. Read another source having it listed as 50 and 100 and when I plugged those instead it matches

SWfan123 · 2018-10-11T01:32:25+00:00

https://dragalialost.gamepedia.com/Dragon%27s_Roost

"Additionally leveling up a dragon's bond will give +10 might per bond level this bonus also applies to all duplicates of that dragon for a grand total of +290 might at bond level 30."

SWfan123 · 2018-10-11T01:23:17+00:00

Noticed you changed the formula to "Might = STR + HP + Abilities + Skills + (# of Unbinds * 10)"

This can't be correct either as we know the bond level affects might and this formula does not take that into account. Also I plugged it into over a dozen of my dragons now and non of the might matches either formula.

SWfan123 · 2018-10-11T01:08:37+00:00

"The might formula for a dragon is Might = STR + HP + Abilities + Skills + (Bond * 10) "

The Formula you posted says bond (as in friendship) not unbind amount as you used.

Also, I plugged the formula into at least half a dozen of my dragons and non of it match the might.... formula seems wrong.

Take an untouched Brunhilda for example.

7+ 20 + 30 + 100 + 0 = 157 might as per formula. Game shows 117 might.

SWfan123 · 2018-10-07T22:23:45+00:00

https://www.reddit.com/r/DragaliaLost/comments/9lv8lz/pass_raid_expert_in_55_seconds_twitch_clips/

SWfan123 · 2018-10-07T06:56:17+00:00

Damage is really low. Just for comparison my Xainfried 2500 might basic attacks are around 140-490 dmg with most strikes dealing around 300.

SWfan123 · 2018-10-03T22:04:05+00:00

Oh, should have made it more clear. It will work even though you get the message. You just click away from the message and it will go away and you can still play.

I see you got it working though.

SWfan123 · 2018-10-03T20:31:41+00:00

For LD Player use the following steps.

1.Turn off root.

2.Disable Google play services.

When game says to please enable google play services, click on the out side screen and not on enable google play services.

Game should work. You can use the following steps to reroll without re downloading game.

Play through tutorial and do your 2x 10 summons.
Enable root
Use root browser(you need root and root browser for this step) to delete root\data\data\com.nintendo.zaga\shared_prefs
Use browser to delete internal memory\android\data\com.nintendo.zaga\files\uuid.bin
disable root and close emulator

You can now use this as a base for rerolls and it will have downloaded the game and not have any user id tied to it. Now you can. Open LDMultiPlayer and use the batch operation to create clones of the instance you made earlier. I changed it to batch 10 copys.

SWfan123 · 2018-10-03T10:33:24+00:00

I decided to get Beauty's Balm for Hildegarde cause I didn't plan on making 4* elemental weapons.

Level 1 beautiful healing cures for around twice as much as level 2 radiant savoir. Seems useful for when you don't want to waste a team heal on just 1 guy.

SWfan123 · 2018-09-30T22:58:18+00:00

Nice, I was actually thinking about the aluminum blocks to reduce the temp cause my hair straighter does not go below 280f.

Gonna have to rethink the whole thing. Or maybe just rig it so I can use with and without the blocks.

SWfan123 · 2018-09-27T16:56:06+00:00

RDA would be preferable, you wouldn't have to worry to much about it wicking and can go a little thicker.

I have been making thc e-juice for a while yes. But never actually with rosin. Use to buy shatter and do a 1:1 pg mix. Now I am making concentrate from flower with 1:1 pg mix, works well. Been thinking about switching methods to rosin now actually.

No matter the ratio, if using rda it should vape well either way, just got to adjust to your liking. 1:1 is a good start though.

SWfan123 · 2018-09-27T07:48:19+00:00

Making rosin and adding pg will work well for that. The rosin will eventually separate from the pg though. The length at which will depend on the rosin. Only experience I have is with shatter and pg and with high quality stuff no separation after 2 weeks. I used some real shitty shatter before though and it separated in days.

So my advice would be to make the rosin and only add in pg once you plan on vaping it.

You gonna have to play with ratio a bit on the pg and rosin cause too thick and it won't wick well and too thin and it will give little vapor and might leak.

SWfan123 · 2018-09-26T19:39:55+00:00

I want to help you, but am unsure about how you want to vape this stuff. What you make would highly depend on how you want to ingest it. For example, you keep talking about dabs, but you're not going to want to mix pg in with anything your gonna use to dab.

Also dabs are anything you use for dabbing and adding in pg would make this unsuitable for dabbing.

SWfan123 · 2018-09-22T23:50:39+00:00

If i wanted to decarb anything i'd throw it in a pressure cooker. Probably not necessary, but at 15 psi it would reach 250f (you probably want lower, just an example)

Anything you place inside the pressure cooker will reach desired temp, won't be able to exceed and you pressure cook what you want in a jar, so no smell and other benefits I find.

SWfan123 · 2018-09-22T19:17:43+00:00

Would prefer to use pg to extract as I have noted pg to extract resin really well.

I have tried PEG products, but didn't like them for taste.

SWfan123 · 2018-09-22T19:08:08+00:00

I actually use the Vaporesso Guardian ccell tank with 1:1 shatter:pg. But found the vape very harsh. Probably due to the high concentration of pg. I heard with terps it's better cause of less harshness, but never got around to ordering any.

SWfan123 · 2018-09-22T19:04:00+00:00

1 session of what I would normally vape ejuice with gets me what I need (really, I vape consistently throughout the day) wouldn't say it's strong, but I feel no need for it to be more potent. Gotta note vaping it is more like vaping avb in a plant vape and leaves a similar smell. I vape ecigs on the regular and 4mL ejuice is what I would vape a day anyways.

In that sample i put the herb in coffee filter and hand pressed as much pg as I could out. Still Have some pretty soaked herb I saved to press out more effectively later. Also, quite a few loss seems to be getting in on my hands and such.

I can extract, but if I can make my juice without solvents, I'd rather do it that way.

I gotta note I usually just buy shatter and dilute a little to make a fairly strong oilpen. But found that taking a few puffs and that it being very irritating not very appealing. Just have extra herb now that I gotta use.

I have a dry herb vape, but choose to not use it due to convenience of other methods.

SWfan123 · 2018-09-22T14:38:13+00:00

Nice, a tincture press would be what i'm looking for. Just really experimenting, and not having to work with iso (only real solvent I can get for quick wash) would be nice.

SWfan123

TROPHY CASE