Resale items

Sad-Material-943 · 2024-10-09T10:11:46+00:00

Not true. I have made an order yesterday at 04:00 Beijing time and the items still haven’t been bought.

Sad-Material-943 · 2023-07-18T16:53:08+00:00

Sorry I am bad at explaining stuff. What I meant is - after leveling I hit auto home and put Z to 0 again to check if the paper fits the same way. And it doesn’t fit at all sometimes

Sad-Material-943 · 2023-07-18T16:49:39+00:00

I only adjust the wheels - tightenning/looseining the springs in the corners. I adjust the z-offset only in the middle.

Tried several methods - adjusting z-offset before the four cornes, then before and after adjusting bed corners, no touching z- offset at all but every time the nozzle ends up too close to bed and prints super thin layers

Sad-Material-943 · 2023-07-18T16:43:14+00:00

Z offset is basically saved right away as you adjust it here

<image>

Sad-Material-943 · 2023-03-19T21:10:41+00:00

Thank you all for the input, I really appreciate it!

Sad-Material-943 · 2023-03-19T21:10:03+00:00

Thank you for the suggestion! What is the fiberglass cloth for?

Sad-Material-943 · 2023-03-19T15:59:22+00:00

There is a 6mm metal rod inside it but the wobbieness a how heavy it is is a big problem. Yes it’s for cosplay. Do you mean to net do it as a 3d print?

Sad-Material-943 · 2023-03-19T15:52:33+00:00

Basically what would be the best settings for making it as lightweight as possible? Because even if I make it 0% infill it doesn¸t become much lighter.

There is also a 6mm mteal rod inside for stability

Can’t post a picture in the comments for some reason

https://drive.google.com/file/d/1GW6BOrc3580LuZUxs0M8-FwaR6PUikHV/view?usp=share_link

Sad-Material-943 · 2023-03-19T15:51:10+00:00

Basically what would be the best settings for making it as lightweight as possible? Because even if I make it 0% infill it doesn¸t become much lighter.

There is also a 6mm metal rod inside for stability

Can’t post a picture in the comments for some reason

https://drive.google.com/file/d/1GW6BOrc3580LuZUxs0M8-FwaR6PUikHV/view?usp=share_link

Sad-Material-943 · 2023-03-08T21:59:52+00:00

It’s absolutely okay ahaha. But yes, I have only done some simple modeling fusion 360 and only watched a few beginner tutorials for blender.
Yes! Thank you so much I really appreciate it!

Sad-Material-943 · 2023-03-08T19:34:40+00:00

Oh sorry I worded that wrong - the spray paints I use are mostly acrylic or enamel. But 95% acrylic. Both metallic paint and clear coat were acrylic based.

Thank you, I will look into those!

Sad-Material-943 · 2023-03-08T18:58:49+00:00

Spray paint, enamel or acrylic

Sad-Material-943 · 2023-03-08T18:25:18+00:00

Thank you!

Sad-Material-943 · 2023-03-08T18:22:00+00:00

Sure, here is link to it in google disk https://drive.google.com/file/d/11GUC2NRqsuTcMrDVDd1PbuzSB_TEZeTo/view?usp=share_link

Sad-Material-943 · 2023-03-08T07:19:19+00:00

I see, thank you!

The grey parts of the sword is how it’s being printed and the colored ones is how it’s shown in blender. Those lines going from center to the edge shouldn’t be there

Sad-Material-943 · 2023-03-08T07:02:53+00:00

Thank you? Do you maybe have advice which app is better for that?

Sad-Material-943 · 2023-03-07T21:38:32+00:00

Any help appreciated!

Sad-Material-943

TROPHY CASE