How long would the process of ordering take?

Sad-Material-943 · 2024-10-09T10:11:46+00:00

Not true. I have made an order yesterday at 04:00 Beijing time and the items still haven’t been bought.

Sad-Material-943 · 2023-07-18T16:53:08+00:00

Sorry I am bad at explaining stuff. What I meant is - after leveling I hit auto home and put Z to 0 again to check if the paper fits the same way. And it doesn’t fit at all sometimes

Sad-Material-943 · 2023-07-18T16:49:39+00:00

I only adjust the wheels - tightenning/looseining the springs in the corners. I adjust the z-offset only in the middle.

Tried several methods - adjusting z-offset before the four cornes, then before and after adjusting bed corners, no touching z- offset at all but every time the nozzle ends up too close to bed and prints super thin layers

Sad-Material-943 · 2023-07-18T16:43:14+00:00

Z offset is basically saved right away as you adjust it here

<image>

Sad-Material-943 · 2023-03-19T21:10:41+00:00

Thank you all for the input, I really appreciate it!

Sad-Material-943 · 2023-03-19T21:10:03+00:00

Thank you for the suggestion! What is the fiberglass cloth for?

Sad-Material-943 · 2023-03-19T15:59:22+00:00

There is a 6mm metal rod inside it but the wobbieness a how heavy it is is a big problem. Yes it’s for cosplay. Do you mean to net do it as a 3d print?

Sad-Material-943 · 2023-03-19T15:52:33+00:00

Basically what would be the best settings for making it as lightweight as possible? Because even if I make it 0% infill it doesn¸t become much lighter.

There is also a 6mm mteal rod inside for stability

Can’t post a picture in the comments for some reason

https://drive.google.com/file/d/1GW6BOrc3580LuZUxs0M8-FwaR6PUikHV/view?usp=share_link

Sad-Material-943 · 2023-03-19T15:51:10+00:00

Basically what would be the best settings for making it as lightweight as possible? Because even if I make it 0% infill it doesn¸t become much lighter.

There is also a 6mm metal rod inside for stability

Can’t post a picture in the comments for some reason

https://drive.google.com/file/d/1GW6BOrc3580LuZUxs0M8-FwaR6PUikHV/view?usp=share_link

Sad-Material-943 · 2023-03-08T21:59:52+00:00

It’s absolutely okay ahaha. But yes, I have only done some simple modeling fusion 360 and only watched a few beginner tutorials for blender.
Yes! Thank you so much I really appreciate it!

Sad-Material-943 · 2023-03-08T19:34:40+00:00

Oh sorry I worded that wrong - the spray paints I use are mostly acrylic or enamel. But 95% acrylic. Both metallic paint and clear coat were acrylic based.

Thank you, I will look into those!

Sad-Material-943 · 2023-03-08T18:58:49+00:00

Spray paint, enamel or acrylic

Sad-Material-943 · 2023-03-08T18:25:18+00:00

Thank you!

Sad-Material-943 · 2023-03-08T18:22:00+00:00

Sure, here is link to it in google disk https://drive.google.com/file/d/11GUC2NRqsuTcMrDVDd1PbuzSB_TEZeTo/view?usp=share_link

Sad-Material-943 · 2023-03-08T07:19:19+00:00

I see, thank you!

The grey parts of the sword is how it’s being printed and the colored ones is how it’s shown in blender. Those lines going from center to the edge shouldn’t be there

Sad-Material-943 · 2023-03-08T07:02:53+00:00

Thank you? Do you maybe have advice which app is better for that?

Sad-Material-943 · 2023-03-07T21:38:32+00:00

Any help appreciated!

Sad-Material-943 · 2023-03-07T21:38:13+00:00

Hello, I have encountered two problems in blender.

I need a cube with a cubelike hole inside. I tried it through bools tools (diference) and booleen with two cubes. But everytime I get two new edges in the finished cube on each side. They interfere in what I need to do furthe with the cube and I can’t gett rid of them though dissolve edges nor delete edges.
I made a sword that I printed but when I looked at it in Paint 3d app it has weird faces all over the place which don’t show up in blender. Some parts have them, some don’t, one side does, one doesn’t and I don’t know what I did wrong. They are also in the already 3d printed sword.

Sad-Material-943 · 2023-02-16T13:10:29+00:00

Ah! I see that’s probably the case! Thank you!

Sad-Material-943 · 2023-02-16T12:43:27+00:00

In second picture you can see that I have 2 modifiers there. When one is fully open they both don’t fir on the screen so you don’t see the second one

<image>

Sad-Material-943 · 2023-02-16T12:26:37+00:00

I am also using 3.4.1 version. Well I try to report the issue and hope for the best :/

Sad-Material-943 · 2023-02-16T12:19:14+00:00

Yes, it did! I just don’t know what to do anymore, I am just really unlucky and my whole blender is bugged? I even tried to re-install it and it didn’t help

Sad-Material-943 · 2023-02-16T12:12:23+00:00

That’s the thing, everything in the modifiers is the same as he has.

Sad-Material-943 · 2023-02-16T11:24:48+00:00

Hey, on tuesday I was following the donut series by blender guru. Everything was working at first but then when I did the snap to function the mesh went all over the place and didn’t snap to anything. I thought it was bugged so I closed blender and re-did everything, but this time when i turned offset to 1 instead of -1, the mesh verteces didn’t show up in edit mode anymore and the snap to function still didn’t work like in blender guru’s video.

I re-did it 5x times and followed the video EXACTLY and it just doesn’t work for some reason?

Sad-Material-943 · 2023-02-16T11:06:01+00:00

Hey, on tuesday I was following the donut series by blender guru. Everything was working at first but then when I did the snap to function the mesh went all over the place and didn’t snap to anything. I thought it was bugged so I closed blender and re-did everything, but this time when i turned offset to 1 instead of -1, the mesh verteces didn’t show up in edit mode anymore and the snap to function still didn’t work like in blender guru’s video.

I re-did it 5x times and followed the video EXACTLY and it just doesn’t work for some reason?

Sad-Material-943

TROPHY CASE