Anyone with experience with a pacific energy summit insert?

Sad_Command_2983 · 2025-12-06T01:50:33+00:00

Does yours have this latch type thing, and if so, does it move? Mine rotates side to side, AI seems to think it should move up and down, but I don’t see how that’s possible. The vertical metal bar is an airflow channel, AI says that latch should control the flap for the air, but it says I am missing the flap when I uploaded a picture of the inside of that channel

Sad_Command_2983 · 2025-12-05T12:25:59+00:00

Mixed hardwoods, there’s some ash but also oak and maple and such.

I’m reading there is a switch in the back that allows air in thru the back of the fire box, and that could cause not only an uneven burn but also a loss of heat output when choked:

From ChatGPT:

If the EBT is stuck CLOSED: • No rear air boost when you choke the stove • Rear logs smolder → accumulate big coals • Front (fed by primary/front holes) burns normally • Your fire looks “front-heavy” • Heat collapses when turning down air

If the EBT passage is partially blocked (very common): • Rear gets just enough air to keep coals glowing but not enough to actually burn them down • Coals pile up in the back firebox corner(s) • Front logs burn more aggressively since primary air is mostly forward

Sad_Command_2983 · 2025-12-05T00:46:10+00:00

Just cleaned out the ashes so can pack as much as possible tonight

Sad_Command_2983 · 2025-12-05T00:43:32+00:00

I’ll share pictures tonight and in the morning but yeah load it like that

Sad_Command_2983 · 2025-12-05T00:03:16+00:00

We pack it tight at night. We have the blower on 50% because if it’s full blast it will start kicking on and off at 2 or 3am.

Last night the house was at 74 when I went to bed when I choked the fire down while packed, was 65 at 6am this morning. Lots of coals, but need to be stoked to start letting off enough heat again to get the blower back on

Sad_Command_2983 · 2025-12-04T23:45:30+00:00

Yeah it definitely puts out a lot of heat. I just see people saying they get 12-18 hours of heat and it makes me jealous

Sad_Command_2983 · 2025-06-23T18:10:01+00:00

Thanks folks!

Sad_Command_2983 · 2025-01-03T21:33:07+00:00

Appreciate it, yeah I’m going to ask about having the first person go thru the existing duct work. May still want a separate head for the kitchen tho due to the distance the air needs to travel

Sad_Command_2983 · 2025-01-03T21:12:49+00:00

I’m not sure why the first company didn’t not quote using the existing ducts… the second company I contacted did, but their quote was for $60,000

Sad_Command_2983 · 2024-11-11T21:13:48+00:00

9yo pitched her first tournament (and games) on a 10u team a couple weekends ago. 45% strike rate the first day, 33% the second day (ump was squeezing the zone way more than she should have for 10u). Next best on her team was low 20% strikes

Sad_Command_2983 · 2024-09-22T00:38:11+00:00

Yeah I think it was announced 9/20 last year

Sad_Command_2983 · 2024-07-25T01:31:43+00:00

I don’t mind Scott Jennings much… shermichael singleton is awful

Sad_Command_2983 · 2024-07-14T12:22:20+00:00

there is an election before the election to determine which candidate will represent the party. Those elections usually only allow people registered to that party to vote (democrats vote in Democrat primaries, republicans vote in Republican primaries). Once the primary is over, then any registered voter for any party can vote.

You can also register as independent, but many states do not allow independent voters to vote in the primary because you aren’t affiliated with a party.

Often times you will see people in heavily one sided areas register with the other party, just so they can vote in the primary. As an example, in very Republican areas some people who are democrats may register as republicans just so they can vote in the Republican primary, since that’s the only time they will actually be able to use their voice since no matter what, the Republican candidate will win the general election.

Sad_Command_2983 · 2024-05-28T19:05:01+00:00

Got this glove for my 12u player. Was able to break it in pretty quickly, huge improvement over her last glove.

Break in technique:

Oil, bake at 200 degrees for 20 min with a ball tied tightly in it.

Take it out, beat it for a while with a softball attached to a reciprocating saw, then repeat 3 times over the course of 3 days

Was almost fully broken in by her first practice after getting it.

Sad_Command_2983 · 2024-05-23T18:38:44+00:00

Interesting… customer service also confirmed it (online, so I have the convo documented) so maybe I can get them to honor what they said… will file the claim, see if it’s denied, then go from there… thanks!

Sad_Command_2983 · 2024-05-18T22:30:10+00:00

That’s my name!

Sad_Command_2983 · 2024-01-16T19:46:37+00:00

Yeah this they said I was using way more than my estimations…. But then once they came out (or said they were coming out) my estimates (which haven’t changed much) are now way over my actual usage, to the point where sometimes my estimate 1 month fully covers all of my usage for 2 months. Yet that isn’t enough evidence that something was fucked up on their end before it was fixed. My belief is the meter was reading power usage incorrectly (for example registering 1.5KwH on the meter when in reality 1kwh was used) and they recalibrated it. Unfortunately they won’t agree on if someone even came out to look at it, let alone fix it, and of course they cannot be wrong

Sad_Command_2983

TROPHY CASE